CU-Boulder awarded $3.6 million for new way to produce magnesium for auto parts

September 19, 2013

A University of Colorado Boulder professor has been awarded a three-year, $3.6 million grant from the Energy Department's Advanced Research Projects Agency to develop a new process to produce magnesium that can be used to make lightweight vehicle parts.

CU-Boulder Professor Alan Weimer and his research team will use the grant to develop a new gasification process that uses concentrated solar power to produce both magnesium and synthesis gas, or syngas, a precursor for synthetic gasoline. The procedure includes a novel quenching, or cooling process, to enable a gas-to-solid magnesium phase change inside of the reactor.

Weimer, a professor in CU-Boulder's chemical and biological engineering department, said current magnesium production is energy intensive and produces substantial carbon emissions. But the new renewable energy-powered approach to magnesium production could reduce carbon emissions and lower costs, in addition to creating a synthetic fuel, said Weimer, also executive director of the Colorado Center for Biorefining and Biofuels.

The award was one of 33 "breakthrough" energy projects totaling $66 million given to government, academia and industry announced today by Cheryl Martin, deputy director of the Advanced Research Projects Agency-Energy, or ARPA-E. The awards were split between two programs -- $32 million to develop cost-effective and energy-efficient manufacturing techniques to process and recycle metals for lightweight vehicles, and $34 million to develop advanced biocatalyst technologies that can convert natural gas to liquid fuel for transportation.

The 2013 ARPA-E award to CU-Boulder was the largest for light metal research and development and the largest award overall to a single university. "The new ARPA-E projects announced today demonstrate ARPA-E's commitment to providing critical, early-stage funding for innovative energy technologies," said Martin.

The current leading process to produce magnesium involves using electricity 24 hours a day, a method that is particularly expensive because of high-energy consumption during daylight hours, said Weimer. "Our plan is to use solar energy to power our reactor in the daytime and use electricity only at night during off-peak hours."

The new process involves the reaction of carbon and magnesium oxide, which are heated to high temperatures in a hybrid solar-electrical reactor to produce magnesium vapor and carbon monoxide gas, said Weimer. While the magnesium vapor is converted into a solid metal, the carbon monoxide is combined with hydrogen produced by using excess heat recovered from the solar-electrical reactor to split water into its component parts of hydrogen and oxygen, resulting in the production of syngas that can be made into diesel fuel or gasoline.

"We are using all of the products here, not only to make magnesium, which is a high value product, but also to make fuel," said Weimer, also a faculty member at CU-Boulder's BioFrontiers Institute. "We anticipate that the demand for magnesium will increase as industry looks to produce lower weight, higher mileage vehicles."

Magnesium is 75 percent lighter than steel and 33 percent lighter than aluminum. By 2020, magnesium parts will allow cars and trucks to weigh 15 percent less, leading to fuel savings of 9 to 12 percent, according to the U.S. Automotive Materials Partnership, an industrial coalition of the Chrysler Group LLC, the Ford Motor Company and the General Motors Co.

Weimer said the ARPA-E grant will provide funding for CU-Boulder postdoctoral researchers, graduate students and undergraduates in the coming years. The Weimer research lab has been engaged in solar-thermal processing for the past 17 years and is the largest academic solar-thermal chemistry research team in the United States.

The Colorado Center for Biorefining and Biofuels, or C2B2, is a collaboration of CU-Boulder, the Colorado School of Mines, Colorado State University and the National Renewable Energy Laboratory.

In August, Weimer, CU-Boulder Professor Charles Musgrave and their research team published a paper in Science magazine about the development of a radically new technique to efficiently split water using the power of sunlight. In addition to paving the way for the broad use of hydrogen as a clean, green fuel, the water-splitting technique described in Science has been integrated into the new magnesium production process, said Weimer.
-end-
Contact:
Alan Weimer, 303-492-3759
alan.weimer@colorado.edu
Jim Scott, CU-Boulder media relations, 303-492-3114
jim.scott@colorado.edu

University of Colorado at Boulder

Related Carbon Articles from Brightsurf:

The biggest trees capture the most carbon: Large trees dominate carbon storage in forests
A recent study examining carbon storage in Pacific Northwest forests demonstrated that although large-diameter trees (21 inches) only comprised 3% of total stems, they accounted for 42% of the total aboveground carbon storage.

Carbon storage from the lab
Researchers at the University of Freiburg established the world's largest collection of moss species for the peat industry and science

Carbon-carbon covalent bonds far more flexible than presumed
A Hokkaido University research group has successfully demonstrated that carbon-carbon (C-C) covalent bonds expand and contract flexibly in response to light and heat.

Metal wires of carbon complete toolbox for carbon-based computers
Carbon-based computers have the potential to be a lot faster and much more energy efficient than silicon-based computers, but 2D graphene and carbon nanotubes have proved challenging to turn into the elements needed to construct transistor circuits.

Cascades with carbon dioxide
Carbon dioxide (CO(2)) is not just an undesirable greenhouse gas, it is also an interesting source of raw materials that are valuable and can be recycled sustainably.

Two-dimensional carbon networks
Lithium-ion batteries usually contain graphitic carbons as anode materials. Scientists have investigated the carbonic nanoweb graphdiyne as a novel two-dimensional carbon network for its suitability in battery applications.

Can wood construction transform cities from carbon source to carbon vault?
A new study by researchers and architects at Yale and the Potsdam Institute for Climate Impact Research predicts that a transition to timber-based wood products in the construction of new housing, buildings, and infrastructure would not only offset enormous amounts of carbon emissions related to concrete and steel production -- it could turn the world's cities into a vast carbon sink.

Investigation of oceanic 'black carbon' uncovers mystery in global carbon cycle
An unexpected finding published today in Nature Communications challenges a long-held assumption about the origin of oceanic black coal, and introduces a tantalizing new mystery: If oceanic black carbon is significantly different from the black carbon found in rivers, where did it come from?

First fully rechargeable carbon dioxide battery with carbon neutrality
Researchers at the University of Illinois at Chicago are the first to show that lithium-carbon dioxide batteries can be designed to operate in a fully rechargeable manner, and they have successfully tested a lithium-carbon dioxide battery prototype running up to 500 consecutive cycles of charge/recharge processes.

How and when was carbon distributed in the Earth?
A magma ocean existing during the core formation is thought to have been highly depleted in carbon due to its high-siderophile (iron loving) behavior.

Read More: Carbon News and Carbon Current Events
Brightsurf.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com.