Purdue method will help industry design parts-search systems

September 26, 2005

WEST LAFAYETTE, Ind. - Researchers at Purdue University who developed the first system capable of searching a company's catalog of three-dimensional parts created with computer-aided design software are now providing a method to evaluate how well such systems work.

Shape-search engines could save time and millions of dollars annually by making it easier for companies to "reuse" previous designs, reducing redundancy and streamlining a company's supply chain. The systems will enable companies to benefit from the lessons learned in creating past parts, said Karthik Ramani, a professor of mechanical engineering and director of the Purdue Research and Education Center for Information Systems in Engineering.

The Purdue mechanical engineers have created a "benchmarking database and process" that enables engineers to evaluate how well their search system is able to retrieve matches, Ramani said.

Findings will be detailed in two research papers being presented today (Monday, Sept. 26) during the 25th Computers and Information in Engineering Conference held by the American Society of Mechanical Engineers in Long Beach, Calif. The papers were written by Ramani, mechanical engineering doctoral students Natraj Iyer and Jayanti Subramaniam, and postdoctoral research associate Jiantao Pu.

The Purdue 3-D shape-search method also has been selected for a special "showcase and reception" from 5-7 p.m. (PDT) on Tuesday (Sept. 27) at the Hyatt Regency hotel. The method, developed by Pu and Ramani, has been commercialized by Imaginestics LLC, a company in the Purdue Research Park. Ramani is chief scientist for the company, which has developed products based on the research.

Computer-aided design, commonly referred to as CAD, was introduced a few decades ago for such daunting projects as creating better ship hulls and airplane wings. The systems are now routinely used to design everything from automotive water pumps to industrial machine parts.

"One of the great disappointments of CAD has been the difficulty of reusing data," Ramani said. "Once CAD information has been created and used, it is often stored and forgotten. As a result, industry loses a lot of money by not being able to reuse earlier parts. The proverbial wheel is reinvented many times."

Parts designers spend about 60 percent of their time searching for the right information, which is one of the most frustrating tasks for engineers, Ramani said.

"The whole power of computers is lost if you are not able to retrieve and 'reuse' what you have created in the past," he said.

The Purdue shape-search system enables people to select an inventoried part that resembles a desired part and retrieve similar items. Users also can sketch the desired part entirely from memory, or they can choose a part that looks similar from the company's catalog and then sketch modifications to that part. The system then assists in finding the desired part.

The Purdue benchmarking system uses an inventory of 1,000 parts and evaluates how well a search system is able to retrieve matches to a part entered into a query. The parts are grouped in 40 categories, such as ringlike parts, T-shaped parts, cylindrical parts and disk-shaped parts.

"If I give a query for a part that's in one of the categories, the top 10 results should ideally be in that category and as close to the queried part as possible," Ramani said. "If the search system found only six matches from the right category and four from some other category, then I know it's not that good."

The Purdue researchers also have created a method for automatically orienting a part as humans would view it - in its "most stable orientation," meaning a position in which the part would not fall over.

"If I placed a part on the top of a table and it fell over, it would be in an unstable position," Ramani said. "If I placed the same part on a table and it remained in place, that would be its most stable position, which is how humans imagine a part and how they draw the part. We came up with a method for very stable pose determination, then we index the part in the database in that pose. Then, for that particular stable position, we project it in various views, such as a side view, a front view and a top view, so that you can really see what the part looks like, which is important for sketch-based queries."

The benchmarking database and parts inventory are available online at http://engineering.purdue.edu/precise. A demonstration software prototype called "Shapelab" also is available online at http://www.purdue.edu/shapelab.

A critical element that makes the most stable pose determination and searchable database possible is using simplified versions of CAD parts. Those simplified versions, called "faceted models" because they are made up of a series of triangular segments, require less computing power than would be needed to process more complex CAD objects. The Purdue researchers created a new method for representing a part, converting it from a flat, two-dimensional drawing into a "two and a half dimension" representation. The 2.5-D method adds individual detail to the drawings and faceted CAD models and represents them in a way that is searchable.

The Purdue methods allow the user to fine-tune the search by changing the sketch.

"The search is a multi-step process, which is very important," Ramani said. "You repeatedly narrow down the characteristics of the part you are looking for to bridge the gap between what's in your head - your idea of what the part looks like - and what's in this huge inventory of parts. This is not a simple, single-step approach that others have tried."

The Purdue researchers used their benchmarking process to test about a dozen shape-search methods, including two from Purdue and the remainder from other universities.

"Our methods consistently performed with 20 to 30 percent higher precision than other methods," Ramani said. "In addition, the Purdue method has the unique capability of being interactive and closer to human perception. They have made search an interactive process rather than a one-shot query."

The Purdue researchers plan to eventually provide their benchmarking system online free of charge.
-end-
The work has been funded by the Indiana 21st Century Research and Technology Fund, created by the state to promote high-tech research and development and to help commercialize innovations. The work also is supported by Purdue's Center for Advanced Manufacturing and the Cyber Center, both located at Discovery Park, the university's hub for interdisciplinary research and entrepreneurship.

Writer: Emil Venere, (765) 494-4709, venere@purdue.edu

Source: Karthik Ramani, (765) 494-5725, ramani@ecn.purdue.edu

Related Web sites:
Karthik Ramani: http://widget.ecn.purdue.edu/~ramani/
Center for Information Systems in Engineering: http://engineering.purdue.edu/precise
ASME International Design Engineering Technical Conferences: https://www.asmeconferences.org/idetc2005/
Imaginestics LLC: http://www.imaginestics.com

http://news.uns.purdue.edu/html4ever/2005/050926.Ramani.CAD05.html
http://news.uns.purdue.edu/images/+2005/ramani-CAD05-1.jpg and
http://news.uns.purdue.edu/images/+2005/ramani-CAD05-2.jpg

IMAGE CAPTION:

A "shape-search" method developed by engineers at Purdue University enables people to search a company's catalog of parts created with computer-aided design software. As this image illustrates, the Purdue method lets people sketch the general shape of the part they are looking for and retrieves parts that match the sketch. Users also can pick an inventoried CAD part that resembles the part they are seeking, and then matches are retrieved. The search can be conducted over the Internet or internally at a company site. The method has been commercialized by a company in the Purdue Research Park. Shape-search engines could save time and millions of dollars annually by making it easier for companies to "reuse" previous designs, reducing redundancy and streamlining a company's supply chain. (School of Mechanical Engineering/Purdue University)

IMAGE CAPTION:

A "shape-search" method developed by engineers at Purdue University enables people to search a company's catalog of parts created with computer-aided design software. The method, which has been commercialized by a company in the Purdue Research Park, lets people sketch the general shape of the part they are looking for and retrieves parts that match the sketch. As this image illustrates, users also can pick an inventoried CAD part that resembles the part they are seeking, and the system retrieves matches. The search can be conducted over the Internet or internally at a company site. Shape-search engines could save time and millions of dollars annually by making it easier for companies to "reuse" previous designs, reducing redundancy and streamlining a company's supply chain. (School of Mechanical Engineering/Purdue University)

ABSTRACT

An Engineering Shape Benchmark for 3D Models

Natraj Iyer, Jayanti Subramaniam, and Karthik Ramani School of Mechanical Engineering, Purdue University

Three-dimensional shape searching is a problem of current interest in several different fields, especially in the mechanical engineering domain. There has been a large body of work in developing representations for 3-D shapes. However, there has been limited work done in developing domain dependent benchmark databases for 3-D shape searching. In this paper, we propose a benchmark database for evaluating shape based search methods relevant to the mechanical engineering domain. Twelve feature vector-based representations are compared using the benchmark database. The main contributions of this paper are development of an engineering shape benchmark and an understanding of the effectiveness of different shape representations for classes of engineering parts.

Purdue University

Related Engineering Articles from Brightsurf:

Re-engineering antibodies for COVID-19
Catholic University of America researcher uses 'in silico' analysis to fast-track passive immunity

Next frontier in bacterial engineering
A new technique overcomes a serious hurdle in the field of bacterial design and engineering.

COVID-19 and the role of tissue engineering
Tissue engineering has a unique set of tools and technologies for developing preventive strategies, diagnostics, and treatments that can play an important role during the ongoing COVID-19 pandemic.

Engineering the meniscus
Damage to the meniscus is common, but there remains an unmet need for improved restorative therapies that can overcome poor healing in the avascular regions.

Artificially engineering the intestine
Short bowel syndrome is a debilitating condition with few treatment options, and these treatments have limited efficacy.

Reverse engineering the fireworks of life
An interdisciplinary team of Princeton researchers has successfully reverse engineered the components and sequence of events that lead to microtubule branching.

New method for engineering metabolic pathways
Two approaches provide a faster way to create enzymes and analyze their reactions, leading to the design of more complex molecules.

Engineering for high-speed devices
A research team from the University of Delaware has developed cutting-edge technology for photonics devices that could enable faster communications between phones and computers.

Breakthrough in blood vessel engineering
Growing functional blood vessel networks is no easy task. Previously, other groups have made networks that span millimeters in size.

Next-gen batteries possible with new engineering approach
Dramatically longer-lasting, faster-charging and safer lithium metal batteries may be possible, according to Penn State research, recently published in Nature Energy.

Read More: Engineering News and Engineering Current Events
Brightsurf.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com.