UD Computer News: Future Looks Bright For Tunnel Diodes, Promising Faster, More Efficient Circuits

October 01, 1998

When Nobel Prize winner Leo Esaki discovered the tunnel diode in 1957, the super-fast, current-switching device was touted as a kind of Holy Grail for computer chip makers, but technological obstacles have so far hindered its widespread use in conventional, silicon-based circuits.

In the Oct. 12, 1998 issue of Applied Physics Letters, online Oct. 7, University of Delaware researchers--with scientists at the Naval Research Laboratory and Raytheon Systems Co.--describe promising, new tunnel diodes that may help chip makers boost silicon's speed while further shrinking chips.

The technology, described in a patent disclosure, should someday benefit soldiers in the battlefield--or business people on the go, says lead researcher Paul R. Berger, an associate professor of electrical and computer engineering at UD.

If UD's silicon-based, tunnel diodes can be combined with semiconductor circuits to boost transistor switching speeds, the breakthrough could enhance silicon chips, which aren't expected to get any faster or smaller after about the year 2007, says Berger, who received a 1996 National Science Foundation CAREER award for promising, young investigators.

Berger's collaborator, Alan C. Seabaugh of Raytheon, agrees. "This is the first tunnel diode that is compatible with a silicon integrated circuit process," he says. "Adding the diode to silicon circuits will increase circuit performance and could extend the life of existing production lines--a considerable savings, as a new fabrication facility can cost over $1 billion."

The UD tunnel diodes "could provide the same functions with half the components, requiring fewer interconnections, so that circuit speed increases and power losses are reduced," Seabaugh says. "Fewer components also means more chips could be made on a single, silicon wafer, lowering costs."

Nick Holonyak Jr., coauthor of a landmark 1959 article on tunneling events in silicon and germanium materials and maker of the first practical, light-emitting diode, says the UD research is "an exciting revival" of some of his work. "I'm happy to see this work," says Holonyak, the John Bardeen Professor of Electrical and Computer Engineering and Physics at the University of Illinois at Urbana-Champaign. "It's very interesting to me because it all started with silicon and germanium!"

Newer fabrication techniques--specifically, low-temperature molecular beam epitaxy (MBE) processes pioneered by Phillip E. Thompson and Karl D. Hobart of the Naval Research Laboratory--allowed Berger's team to investigate questions first raised by Holonyak. "MBE wasn't around when Holonyak was conducting those studies," says Thompson. "It took us awhile to make it work at lower temperature, which freezes atoms in place as you add them to the surface of materials."

With Berger and Seabaugh, authors of the Applied Physics Letters article were Thompson and Hobart (both UD graduates); Roger Lake, Gerhard Klimeck and Daniel K. Blanks, Raytheon (Dallas); James Kolodzey, a UD professor whose work set the stage for Berger's current study; UD graduate students Sean L. Rommel, Mike W. Dashiell and Hao Feng; and UD undergraduate Thomas E. Dillon. Authors of the patent disclosure are Berger, Rommel, Thompson, Hobart and Lake.

New Chips For The Military And Managers

Faster circuits using less power could revolutionize many military technologies, especially devices for converting analog data into digital signals, says Lt. Col. Gernot Pomrenke, USAF, manager of the Ultra-Electronics Program at DARPA, which sponsored the UD research, along with the National Science Foundation.

"This technology is absolutely promising," Pomrenke says. "It could increase the functionality of high-speed circuits for radar receivers, missile seekers, satellite communication systems, and advanced communications networks capable of handling extremely high data-transfer rates." High-speed, logic circuits should support big advances in image processing and pattern recognition, too, he adds.

In the 21st century, soldiers in the field and business people traveling with portable computers might use computer chips equipped with the new, tunnel diodes, Berger says. Superfast, highly efficient memory devices would require less power and, therefore, fewer stops to recharge batteries.

Light At The End Of The Tunnel

A tunnel diode is a "versatile, high-speed, semiconductor switch," Seabaugh explains. "You can switch the electrical current back and forth, or you can store information with it." That's because electrons zipping through a tunnel diode don't follow the rules of classical physics and remain within designated pathways. Instead, they tunnel through barrier regions. As more voltage is applied to the diode, he says, more electrons flow, then less, then more again at a critical voltage level, a consequence of the quirky, quantum mechanical behavior of tunneling electrons known as "negative differential resistance"-an up-and-down pattern of current flow.

Existing tunnel diodes, fabricated individually from metal alloys, are limited to "niche applications," and U.S. companies sell only about 10,000 of the devices each year, Berger says. So far, he adds, researchers haven't been able to mass-produce silicon-based, tunnel diodes offering high "peak-to-valley" ratios-a measure of the efficiency of the tunneling process.

The key problem, Berger says, has been the amount of "dopant" substances or impurities that must be packed into tunnel-diode materials to closely confine electrons, so that they demonstrate quantum operational speeds. "Creating tunnel diodes using this traditional, alloy process is a black art," according to Berger. "You put a blob of something on a substrate and heat it up and it melts and diffuses just like grilled cheese. You can't make millions of these to go with your Pentium" chips!"

Instead, Berger and his colleagues `grew' highly doped (delta-doped) silicon monolayers at the Naval Research Laboratory, using a technique known as molecular beam epitaxy (MBE), at a relatively low temperature-370 degrees Celsius (698 degrees Fahrenheit). The materials were then cured or annealed at 700 to 800 degrees C. The resulting diode resembles a sandwich, with a 4-nanometer layer of pure silicon-germanium at the center, encased by delta-doped slices of boron and antimony on either side. The boron and antimony layers are then encased by silicon with opposing electrical charges, all of which is heaped atop a `plate'-a silicon substrate with positive charge carriers.

"We've been able to mass-produce many of these tunnel diodes across a wafer," Berger says. "We believe this is the first viable technology for integrating silicon-based, tunnel diodes with conventional semiconductors."

To be useful in circuits, researchers say, this type of tunnel diode--known as a resonant interband tunneling diode (RITD)--should offer a peak-to-valley ratio (PVR) of about 4 at room temperature. "We're more than halfway there," Seabaugh says, with a PVR of over 2 as of this writing, and a peak current density of over 20 kiloamps per centimeter squared, meaning "you can drive more current through the interconnect lines, which is useful for higher-speed logic applications," Berger says. "We have many, many devices, and 95 percent of them are working."

Paul van der Wagt, a designer of tunnel diode-based circuits, says Berger's research "is very promising," perhaps also for low-power, memory applications if currents can be scaled down. "They achieved a negative differential resistance in a silicon system, which has rarely been obtained before," says van der Wagt, a research scientist with the Rockwell Science Center in Thousand Oaks, Calif., formerly with Texas Instruments, who recently completed a review of scholarly literature on tunnel diodes. "They also have obtained quite a reasonable peak current density level. It's significant work."

For photo and diagram click here http://www.udel.edu/PR/NewsReleases/Diode/Diode.html

University of Delaware

Related Physics Articles from Brightsurf:

Helium, a little atom for big physics
Helium is the simplest multi-body atom. Its energy levels can be calculated with extremely high precision only relying on a few fundamental physical constants and the quantum electrodynamics (QED) theory.

Hyperbolic metamaterials exhibit 2T physics
According to Igor Smolyaninov of the University of Maryland, ''One of the more unusual applications of metamaterials was a theoretical proposal to construct a physical system that would exhibit two-time physics behavior on small scales.''

Challenges and opportunities for women in physics
Women in the United States hold fewer than 25% of bachelor's degrees, 20% of doctoral degrees and 19% of faculty positions in physics.

Indeterminist physics for an open world
Classical physics is characterized by the equations describing the world.

Leptons help in tracking new physics
Electrons with 'colleagues' -- other leptons - are one of many products of collisions observed in the LHCb experiment at the Large Hadron Collider.

Has physics ever been deterministic?
Researchers from the Austrian Academy of Sciences, the University of Vienna and the University of Geneva, have proposed a new interpretation of classical physics without real numbers.

Twisted physics
A new study in the journal Nature shows that superconductivity in bilayer graphene can be turned on or off with a small voltage change, increasing its usefulness for electronic devices.

Physics vs. asthma
A research team from the MIPT Center for Molecular Mechanisms of Aging and Age-Related Diseases has collaborated with colleagues from the U.S., Canada, France, and Germany to determine the spatial structure of the CysLT1 receptor.

2D topological physics from shaking a 1D wire
Published in Physical Review X, this new study propose a realistic scheme to observe a 'cold-atomic quantum Hall effect.'

Helping physics teachers who don't know physics
A shortage of high school physics teachers has led to teachers with little-to-no training taking over physics classrooms, reports show.

Read More: Physics News and Physics Current Events
Brightsurf.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com.