Sandia-developed removable adhesive bonds and detaches with temperature changes -- New approach to epoxy adhesive relies on reversible chemistry

October 04, 2001

ALBUQUERQUE, N.M. -- A Sandia National Laboratories research team, led by scientist Jim Aubert, has develope d a removable epoxy adhesive that makes bonding and detaching parts a matter of temperature change.

"Our approach to a removable adhesive relies on the use of a reversible chemistry that breaks apart the adhesive at elevated temperatures, resulting in low adhesive molecular weight and low bond strength," Aubert says. Sandia is a Department of Energy National Laboratory.

No other adhesive with the strong bonding characteristics of an epoxy has the capability of melting -- becoming liquid -- and losing its bonding capability at high temperatures and then rebonding when the temperature is lowered. Conventional adhesives become soft at high temperatures, but do not melt and do not lose their ability to bond. Thus, to detach two objects, they must be pried apart, which can cause damage.

The bond in the Sandia adhesive breaks at 90 to 130 degrees C (roughly 190 to 260 F) depending on the formulation. Minimal force is then required to separate the pieces at this heated state. The adhesive will rebond between room temperature (about 20 to 25 C) and 60 C.

Aubert notes, however, that this rebonding capability is finite. The adhesive will retain the ability to bond and unbond a number of times but will at some point become nonremovable. The relatively low debonding temperature makes for versatile component assembly, easier and cheaper component repair, easy upgrading, and simplified dismantlement and recycling. It allows for upgrading as new technology becomes available or rebuilding if any defects are discovered after deployment or during the original manufacturing. "Normally, no thought is given to disassembly after bonding parts with an epoxy," Aubert says. "Yet disassembly is becoming an increasingly important aspect of manufacturing as we become more concerned with the cradle-to-grave aspect of materials for environmental and economic reasons."

For example, future weapon systems are planned that can be taken apart periodically for repair and upgrades. Removable adhesives are critical for this type of component disassembly and reassembly.

Aubert says the new adhesive might also be useful for components that need to be put together, tested, and then taken apart for analysis. The unheated adhesive looks and feels like a large rubber band, having an elastic quality. It can be prepared in any size and thickness. For bonding, it is cut to match objects being attached, applied to one surface, and melted. The bond is made by bringing the melted adhesive into contact with the other surface and curing it between room temperature and 60 degrees C. The adhesive then can be removed at 90 to 130 degrees C, with the adhesive liquefying at different temperatures for different formulations. The removable adhesive has been successfully applied to numerous metals and to some foams and polymers. This research is part of a larger ongoing team effort in Sandia's Materials and Process Sciences Center, which previously developed removable encapsulants and is working on removable conformal coatings. Conformal coatings are applied to circuit boards to provide protection from the environment, mainly moisture, debris, and chemicals. They are usually thin and ideally coat everything on the board evenly. To rework a board, the coating is removed -- hence the removable conformal coating.
-end-
Sandia is a multiprogram laboratory operated by Sandia Corporation, a Lockheed Martin Company, for the United States Department of Energy under contract DE-AC04-94AL85000. With main facilities in Albuquerque, N.M., and Livermore, Calif., Sandia has major research and development responsibilities in national security, energy and environmental technologies, and economic competitiveness.

Story and images available at www.sandia.gov/media/NewsRel/NR2001/ adhesive.htm

Media contact:
Chris Burroughs, coburro@sandia.gov, 505-844-0948

Sandia Technical contact:
Jim Aubert, jhauber@sandia.gov , 505-844-4481

Sandia National Laboratories
A Department of Energy National Laboratory Managed and operated by Sandia Corporation
ALBUQUERQUE, NM LIVERMORE, CA
MEDIA RELATIONS DEPARTMENT, MS 0165
ALBUQUERQUE, NEW MEXICO 87185-0165
PHONE: 505-844-8066 FAX: 505-844-0645

DOE/Sandia National Laboratories

Related Adhesive Articles from Brightsurf:

Low-cost, fly footpad-like adhesive structure capable of repeated attachment/detachment
NIMS, HUE and HUSM have succeeded in developing a method of easily and cheaply producing an adhesive structure capable of repeated attachment and detachment.

Super-strong surgical tape detaches on demand
Engineers have designed a super-strong, detachable adhesive that may someday replace surgical sutures.

Adhesive film turns smartwatch into biochemical health monitoring system
UCLA engineers have designed a thin adhesive film that could upgrade a consumer smartwatch into a powerful health-monitoring system.

Skin and non-adhesive cells found to play pivotal role in the formation of fin
Human fingers are sculpted from a primitive pad-like structure during embryonic development.

Noninvasive, self-adhesive sensor predicted worsening heart failure in veterans
A removable, noninvasive, self-adhesive sensor successfully predicted worsening heart failure and the need for hospitalization in veterans several days before hospitalization occurred.

The secret of strong underwater mussel adhesion revealed
Hyung Joon Cha and his research team identified a mechanism of adhesive proteins in a mussel that controls the surface adhesion and cohesion.

BU chemists develop new biodegradable adhesive
Boston University professor Mark Grinstaff unveiled biodegradable adhesive that is made of entirely naturally derived chemical components.

Adhesive which debonds in magnetic field could reduce landfill waste
Researchers at the University of Sussex have developed a glue which can unstick when placed in a magnetic field, meaning products otherwise destined for landfill, could now be dismantled and recycled at the end of their life.

Time heals all wounds, but this adhesive can help
What if your Band-Aid® actually helped close your cuts and scrapes faster?

Structural development of the brain
In a recent study published in The Journal of Neuroscience, researchers reveal how the basic structure of the brain is formed.

Read More: Adhesive News and Adhesive Current Events
Brightsurf.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com.