Nav: Home

Sled track simulates high-speed accident in B61-12 test

October 05, 2016

ALBUQUERQUE, N.M. -- Sandia National Laboratories has sent a mock B61-12 nuclear weapon speeding down the labs' 10,000-foot rocket sled track to slam nose-first into a steel and concrete wall in a spectacular test that mimicked a high-speed accident. It allowed engineers to examine safety features inside the weapon that prevent inadvertent nuclear detonation.

Data analysis from the test continues. Sandia teams will use the information in collaboration with colleagues at Los Alamos National Laboratory to hone their understanding of how systems respond in abnormal environments -- accidents or other unexpected events.

The test, part of a B61-12 abnormal environments series, used a test unit that resembled an actual weapon as much as possible, said test director Jason Petti. The high-fidelity unit contained standard components that make up a weapon, explosives and other hazardous materials, but did not contain any enriched uranium or plutonium, Petti said.

The complex forward ballistic test used rocket motors to accelerate the sled along the track, releasing the B61-12 unit to a free-flight crash. The test met expectations and demonstrated the team's ability to design and implement high-consequence tests. It built on past success for the B61-12 program from 2014 and 2015, when the labs crashed a rocket sled into a stationary mock weapon in a reverse ballistics test series, considered normal environment tests.

"Abnormal environment tests are performed to benchmark the performance of safety features designed into weapons," said Matt Brewer, lead test engineer. The simulated accident collected data to ensure the weapon met its safety requirements.

Test evaluated weapon performance, helped computer models

Sandia engineers designed the March 9 test both to evaluate the weapon's performance and to calibrate a computer model that predicts what can happen to a weapon under various conditions, Brewer said.

John Sichler, lead for the Center Bomb Subassembly Product Realization Team, said designing a weapon system to remain safe even after an accident is extremely challenging.

Test results help improve solid mechanics models, he said. Because tests are expensive and it's not feasible to re-create every possible accident scenario, computer models fill in the gaps by simulating other scenarios.

"We will use the models to predict how our nuclear safety components will perform in numerous postulated accident scenarios without actually conducting tests," Sichler said. "Over the past five years we've been improving our models. It's remarkable how good they have become."

Teams created plans unique to the forward ballistics test to determine how to conduct it safely, establishing safety thresholds and a precedent for future tests, said Heidi Herrera, B61-12 operations lead.

Her role was created to understand and deal with potential hazards. "They needed someone whose sole job is safety to make sure we can do the test safely, securely and in a quality manner," Herrera said. She helped analyze the hazards, quantified potential risks and identified ways to control them.

Planning for every contingency

Mike Kaneshige, who worked on explosives safety for the test, said the team had data from past tests and an idea of what to expect. "But the environment we live in is very different than when those tests were done," he said. "The expectation is that we plan for every contingency and have a solid technical basis for the decisions we make."

Brewer said analyzing potential chemical, explosive and mechanical hazards allowed the team to identify "what-can-go-wrong scenarios," such as how a sudden fire might affect the sensitivity of explosives used in the test.

The test unit carried an internal data recorder, hardened so it could measure what happened during the impact and gather data to validate computer models. In the earlier reverse ballistic tests, cables connected sensors and recorders to a stationary test unit. However, the recorder was on board for the forward ballistics test because it's impossible to attach cables to a unit speeding down a track.

The recorder itself was an engineering feat -- it had to be very fast, handle vast amounts of data and fit into a small space, Brewer said. The design will be used in future tests.

The recorder also had its own battery, requiring extra safety oversight since the battery power was compatible with the rocket motors' ignitors, meaning the rocket motor would ignite if there was an electrical path between the battery and the motor's initiator, Petti said. The team built in multiple barriers to prevent unintentional ignition, he said.

'A lot of eyes on it'

The test unit and setup contained numerous hazards, so all components of the system had to be evaluated to ensure safety from installation to impact to recovery. In addition, the system had to perform as designed. "There were a lot of eyes on it," Petti said.

John Wharton, manager of B61-12 Hardware Management and Assembly, said complex planning went into recovering the unit after the test. "Since we couldn't be positive about how the unit would respond to the impact, we relied on models and informed engineering judgment. That planning paid big dividends during the post-test recovery. The team safely and successfully dealt with myriad post-test hazards including explosive, thermal, chemical, mechanical and other hazards."

Test preparations took more than a year. That included a calibration test on the track last December using a B61 trainer, a shell the same weight as a real weapon, to assess plans for the actual test, Petti said. The calibration test proved the test setup and gave the team confidence they could provide the needed impact velocity, he said.

The test was performed in partnership with Los Alamos lab's B61 Life Extension Program Systems Engineering and multiple Sandia organizations.
-end-
Sandia National Laboratories is a multi-mission laboratory operated by Sandia Corporation, a wholly owned subsidiary of Lockheed Martin Corp., for the U.S. Department of Energy's National Nuclear Security Administration. With main facilities in Albuquerque, N.M., and Livermore, Calif., Sandia has major R&D responsibilities in national security, energy and environmental technologies and economic competitiveness.

Sandia news media contact: Sue Holmes, sholmes@sandia.gov, (505) 844-6362

DOE/Sandia National Laboratories

Related Data Articles:

Storing data in music
Researchers at ETH Zurich have developed a technique for embedding data in music and transmitting it to a smartphone.
Life data economics: calling for new models to assess the value of human data
After the collapse of the blockchain bubble a number of research organisations are developing platforms to enable individual ownership of life data and establish the data valuation and pricing models.
Geoscience data group urges all scientific disciplines to make data open and accessible
Institutions, science funders, data repositories, publishers, researchers and scientific societies from all scientific disciplines must work together to ensure all scientific data are easy to find, access and use, according to a new commentary in Nature by members of the Enabling FAIR Data Steering Committee.
Democratizing data science
MIT researchers are hoping to advance the democratization of data science with a new tool for nonstatisticians that automatically generates models for analyzing raw data.
Getting the most out of atmospheric data analysis
An international team including researchers from Kanazawa University used a new approach to analyze an atmospheric data set spanning 18 years for the investigation of new-particle formation.
More Data News and Data Current Events

Best Science Podcasts 2019

We have hand picked the best science podcasts for 2019. Sit back and enjoy new science podcasts updated daily from your favorite science news services and scientists.
Now Playing: TED Radio Hour

Rethinking Anger
Anger is universal and complex: it can be quiet, festering, justified, vengeful, and destructive. This hour, TED speakers explore the many sides of anger, why we need it, and who's allowed to feel it. Guests include psychologists Ryan Martin and Russell Kolts, writer Soraya Chemaly, former talk radio host Lisa Fritsch, and business professor Dan Moshavi.
Now Playing: Science for the People

#537 Science Journalism, Hold the Hype
Everyone's seen a piece of science getting over-exaggerated in the media. Most people would be quick to blame journalists and big media for getting in wrong. In many cases, you'd be right. But there's other sources of hype in science journalism. and one of them can be found in the humble, and little-known press release. We're talking with Chris Chambers about doing science about science journalism, and where the hype creeps in. Related links: The association between exaggeration in health related science news and academic press releases: retrospective observational study Claims of causality in health news: a randomised trial This...