New mini microwave thruster is most powerful in its class

October 14, 1999

October 15, 1999, University Park, Pa. --- Penn State engineers have miniaturized a satellite propulsion system they originally built with parts from a microwave oven and produced a new thruster that draws only as much electricity as a light bulb, but puts out more thrust than any system in its class.

Only 2 inches long and 1.25 inches in diameter, the new mini-thruster depends on a microwave generator used in weather radar, aircraft radios and other communications applications instead of the larger kitchen oven magnetron used in the earlier prototype. Performance tested under simulated space vacuum conditions using as little as 80 Watts of power, the new mini-thruster produced the highest thrust for a continuously-operating low power electrothermal thruster.

Dr. Michael Micci, professor of aerospace engineering, led both the original and current thruster projects. He says electric propulsion thrusters currently used to position and maneuver satellites in space operate inefficiently or not at all in the 100-Watt range. The new mini- microwave thruster has the potential not only to reduce on-board power requirements but also to extend a satellite's productive life since it requires only one third the amount of propellant used by other systems. In addition, its small size makes it appropriate for the next generation of mini and microsatellites.

"Many commercial communication satellites in orbit today, for example, were still operational when they ran out of maneuvering propellant," Micci adds. "The increased capacity of the mini-thruster could extend satellite life by three times the number of years."

The idea for a microwave thruster has been around for over a decade. However, currently, Micci's thruster is the only prototype undergoing active ground testing. His ambition is to see the system tested in space.

The thruster concept is based on the fact that microwaves can be used to create and maintain a free-floating plasma or superheated, electrically charged gas within a cavity, Micci says. If a cold "propellant" gas is passed through or around the hot plasma in the cavity, the cold gas will become heated and create thrust when allowed to flow out through a nozzle.

Since the plasma creates temperatures higher than those possible by chemical combustion, the plasma creates more thrust from the same amount of cold "propellant" gas than chemical combustion, notes the Penn State engineer.

In addition to being more propellent-efficient than chemical systems, the microwave-powered thruster is inherently safer as well, he adds. The thruster operates only when the magnetron is generating microwaves. If the magnetron is turned off, so is the plasma that heats the fuel.

In recent tests, Micci operated the system using nitrogen, helium and ammonia as propellant gases. The thruster can also potentially be operated with water as propellant. By means of spectroscopy, the helium velocity at the nozzle exit was found to be about 13,000 meters per second. That is the highest measured specific impulse for a continuously operating low power electrothermal thruster.

Micci will detail the results of the recent tests Friday, Nov. 19, at the Penn State Propulsion Engineering Research Center annual symposium in State College. He also presented the findings at the 35th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit June 20-24 in Los Angeles, California.

His paper, "Low-Power Microwave Arcjet Testing: Plasma and Plume Diagnostics and Performance Evaluation," is scheduled to be published in the Proceedings of that conference on CD-ROM. His co-authors are F. J. Souliez, doctoral candidate; S. G. Chianese, master's candidate; and G. H. Dizac, Penn State master's graduate. The research was supported, in part, by a grant from the Air Force Office of Scientific Research.
Editors: Dr. Micci can be reached at 814-863-0043 or by e-mail

Penn State

Related Plasma Articles from Brightsurf:

Plasma treatments quickly kill coronavirus on surfaces
Researchers from UCLA believe using plasma could promise a significant breakthrough in the fight against the spread of COVID-19.

Fighting pandemics with plasma
Scientists have long known that ionized gases can kill pathogenic bacteria, viruses, and some fungi.

Topological waves may help in understanding plasma systems
A research team has predicted the presence of 'topologically protected' electromagnetic waves that propagate on the surface of plasmas, which may help in designing new plasma systems like fusion reactors.

Plasma electrons can be used to produce metallic films
Computers, mobile phones and all other electronic devices contain thousands of transistors, linked together by thin films of metal.

Plasma-driven biocatalysis
Compared with traditional chemical methods, enzyme catalysis has numerous advantages.

How bacteria protect themselves from plasma treatment
Considering the ever-growing percentage of bacteria that are resistant to antibiotics, interest in medical use of plasma is increasing.

A breakthrough in the study of laser/plasma interactions
Researchers from Lawrence Berkeley National Laboratory and CEA Saclay have developed a particle-in-cell simulation tool that is enabling cutting-edge simulations of laser/plasma coupling mechanisms.

Researchers turn liquid metal into a plasma
For the first time, researchers at the University of Rochester's Laboratory for Laser Energetics (LLE) have found a way to turn a liquid metal into a plasma and to observe the temperature where a liquid under high-density conditions crosses over to a plasma state.

How black holes power plasma jets
Cosmic robbery powers the jets streaming from a black hole, new simulations reveal.

Give it the plasma treatment: strong adhesion without adhesives
A Japanese research team at Osaka University used plasma treatment to make fluoropolymers and silicone resin adhere without any adhesives.

Read More: Plasma News and Plasma Current Events is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to