Nobel Laureate Prof. John B. Goodenough discusses lithium-ion batteries in Science China Chemistry

October 18, 2019

The 2019 Nobel Prize in Chemistry has been awarded to Prof. John B. Goodenough of the University of Texas, Austin, U.S., Prof. M. Stanley Whittingham of Binghamton University, U.S., and Dr. Akira Yoshino of Asahi Kasei Corporation and Meijo University, Japan "for the development of lithium-ion batteries." Prof. Goodenough recently published a perspective article entitled "A Perspective on the Li-Ion Batteries" in Science China Chemistry and discussed the history, current challenges, and promising research directions of lithium-ion batteries, the ubiquitous energy-storage devices in electronics.

Before Lithium-Ion Batteries

The research on the modern rechargeable batteries initiated in the 1960s, marked by the pioneering work of German scientist R. Schroeder and French scientist J. Rouxel, who investigated the chemistry of reversible intercalation of Li+ into transition metal disulfides (MS2). In 1976, Prof. Whittingham published the seminal paper in Science, where he identified TiS2 as an excellent Li+ host to enable energy storage via Li+-intercalation (Figure 1).

The Request for Lithium-Ion Batteries

A fatal problem of the Whittingham battery soon aroused. The anode material, Li metal, was a trouble maker. During the charging process, Li+ de-intercalated from TiS2 and reduced to Li(0) on the Li metal surface. The deposition of Li+, however, is non-uniform due to different nucleation energy across the metal surface, thus creating pointy Li crystals termed Li dendrites or whiskers. Such dendrites could pierce the separator sitting between Li metal and TiS2 (Figure 2), trigger electrical short circuits, ignite organic-liquid electrolytes, and cause combustions or explosions. This severe safety concern halted the development of Li-based batteries.

The Birth of Li-Ion Batteries

In the 1980s, the Li-based batteries were revived by Prof. Goodenough, whose research team proposed a battery without Li metal. Since Li metal served as a source of Li+, the elimination of Li requires either cathode or anode, to contain abundant Li+ ions and serve as Li+-reservoirs. In 1980, Prof. Goodenough and coworkers demonstrated in Materials Research Bulletin a Li-containing layered oxide, lithium cobalt oxide (LiCoO2, Figure 3a), as a potent cathode material. Since the function of the cell relied merely on Li+ (without metallic Li), it was coined the Li-ion battery (Figure 3b). In 1987, Dr. Yoshino demonstrated the first working Li-ion battery with a graphitic carbon anode and a LiCoO2 cathode, which was licensed to the Sony Incorporation and eventually led to the commercialization of Li-ion battery in 1991. Through years of development, the cathodes in modern Li-ion batteries have significantly been diversified, spanning from lithium iron phosphate (LiFePO4) to lithium nickel-manganese-cobalt oxide (NMC) and lithium nickel-cobalt-aluminum oxide (NCA), etc.

The Limitations of Lithium-Ion Batteries

The modern Li-ion batteries are still facing several limitations that are calling concerted efforts from both industry and academy to tackle. They include:

  1. Flammability of organic-liquid electrolytes poses safety hazards;
  2. Fast charging leads to plating of metallic lithium on carbon anodes and battery lifetime degradation;
  3. Overcharging corrodes LiCoO2 and leads to explosions.


The above problems demand careful and real-time monitoring of the battery's working conditions, which significantly increases the operation and maintenance costs.

The Future of Lithium-Ion Batteries

Prof. Goodenough highlighted at the end of the article that developing alternatives to liquid electrolytes could be a promising strategy to address the challenges. Ferroelectric amorphous oxide glasses and polymer electrolytes percolated with liquid organic Li+ solutions are possible candidates.
-end-
For more details, please read:

John B. Goodenough and Hongcai Gao, A Perspective on the Li-Ion Battery. Sci. China Chem. doi: 10.1007/s11426-019-9610-3 (2019).

https://link.springer.com/article/10.1007%2Fs11426-019-9610-3

This post is contributed by Dr. Tianyu Liu at the Department of Chemistry, Virginia Tech, U.S. Tianyu Liu acknowledges the careful proofread by the editorial office of Science China Chemistry.

Science China Press

Related Lithium Articles from Brightsurf:

Preventing lithium loss for high-capacity lithium-ion batteries
A team of Korean researchers has developed a processing technology for maximizing energy densities of high-capacity batteries.

Using Jenga to explain lithium-ion batteries
Tower block games such as Jenga can be used to explain to schoolchildren how lithium-ion batteries work, meeting an educational need to better understand a power source that has become vital to everyday life.

Powering the future with revolutionary lithium extraction technique
An international research team, led by Australia's Monash University, has pioneered and patented a new filtration technique that could one day slash lithium extraction times and change the way the future is powered.

New lithium batteries from used cell phones
Research from the University of Cordoba (Spain) and San Luis University (Argentina) was able to reuse graphite from cell phones to manufacture environmentally friendly batteries.

Using neutrons and X-rays to analyze the aging of lithium batteries
An international team has used neutron and X-ray tomography to investigate the dynamic processes that lead to capacity degradation at the electrodes in lithium batteries.

Can lithium halt progression of Alzheimer's disease?
In a new study, a team of researchers at McGill University has shown that, when given in a formulation that facilitates passage to the brain, lithium in doses up to 400 times lower than what is currently being prescribed for mood disorders is capable of both halting signs of advanced Alzheimer's pathology and of recovering lost cognitive abilities.

MTU engineers examine lithium battery defects
Lithium dendrites cause poor performance and even explosions in batteries with flammable liquid electrolytes.

New technology for pre-replenishing lithium for lithium ion supercapacitors
Li3N containing electrode is prepared by a commercially adoptable route, using DMF to homogenate the electrode slurry.

Towards new lithium-ion batteries that are safer and more efficient
Researchers have studied 2 types of cathodes that are very similar in their composition, but which show completely different behavior: one of them suffers from the known loss of energy density in the first charge cycle, while the other does not.

Post-lithium technology
Next-generation batteries will probably see the replacement of lithium ions by more abundant and environmentally benign alkali metal or multivalent ions.

Read More: Lithium News and Lithium Current Events
Brightsurf.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com.