Giant flakes make graphene oxide gel

October 20, 2011

HOUSTON -- (Oct. 20, 2011) -- Giant flakes of graphene oxide in water aggregate like a stack of pancakes, but infinitely thinner, and in the process gain characteristics that materials scientists may find delicious.

A new paper by scientists at Rice University and the University of Colorado details how slices of graphene, the single-atom form of carbon, in a solution arrange themselves to form a nematic liquid crystal in which particles are free-floating but aligned.

That much was already known. The new twist is that if the flakes - in this case, graphene oxide - are big enough and concentrated enough, they retain their alignment as they form a gel. That gel is a handy precursor for manufacturing metamaterials or fibers with unique mechanical and electronic properties.

The team reported its discovery online this week in the Royal Society of Chemistry journal Soft Matter. Rice authors include Matteo Pasquali, a professor of chemical and biomolecular engineering and of chemistry; James Tour, the T.T. and W.F. Chao Chair in Chemistry as well as a professor of mechanical engineering and materials science and of computer science; postdoctoral research associate Dmitry Kosynkin; and graduate students Budhadipta Dan and Natnael Behabtu. Ivan Smalyukh, an assistant professor of physics at the University of Colorado at Boulder, led research for his group, in which Dan served as a visiting scientist.

"Graphene materials and fluid phases are a great research area," Pasquali said. "From the fundamental point of view, fluid phases comprising flakes are relatively unexplored, and certainly so when the flakes have important electronic properties.

"From the application standpoint, graphene and graphene oxide can be important building blocks in such areas as flexible electronics and conductive and high-strength materials, and can serve as templates for ordering plasmonic structures," he said.

By "giant," the researchers referred to irregular flakes of graphene oxide up to 10,000 times as wide as they are high. (That's still impossibly small: on average, roughly 12 microns wide and less than a nanometer high.) Previous studies showed smaller bits of pristine graphene suspended in acid would form a liquid crystal and that graphene oxide would do likewise in other solutions, including water.

This time the team discovered that if the flakes are big enough and concentrated enough, the solution becomes semisolid. When they constrained the gel to a thin pipette and evaporated some of the water, the graphene oxide flakes got closer to each other and stacked up spontaneously, although imperfectly.

"The exciting part for me is the spontaneous ordering of graphene oxide into a liquid crystal, which nobody had observed before," said Behabtu, a member of Pasquali's lab. "It's still a liquid, but it's ordered. That's useful to make fibers, but it could also induce order on other particles like nanorods."

He said it would be a simple matter to heat the concentrated gel and extrude it into something like carbon fiber, with enhanced properties provided by "mix-ins."

Testing the possibilities, the researchers mixed gold microtriangles and glass microrods into the solution, and found both were effectively forced to line up with the pancaking flakes. Their inclusion also helped the team get visual confirmation of the flakes' orientation.

The process offers the possibility of the large-scale ordering and alignment of such plasmonic particles as gold, silver and palladium nanorods, important components in optoelectronic devices and metamaterials, they reported.

Behabtu added that heating the gel "crosslinks the flakes, and that's good for mechanical strength. You can even heat graphene oxide enough to reduce it, stripping out the oxygen and turning it back into graphite."
-end-
Co-authors of the paper are Angel Martinez and Julian Evans, graduate students of Smalyukh at the University of Colorado at Boulder.

The Institute for Complex Adaptive Matter, the Colorado Renewable and Sustainable Energy Initiative, the National Science Foundation, the Air Force Research Lab, the Air Force Office of Scientific Research, the Welch Foundation, the U.S. Army Corps of Engineers Environmental Quality and Installation Program and M-I Swaco supported the research.Read the abstract at http://pubs.rsc.org/en/content/articlelanding/2011/sm/c1sm06418e

Download images at http://www.media.rice.edu/images/media/NEWSRELS/1020_Graphene1.jpghttp://www.media.rice.edu/images/media/NEWSRELS/1020_Graphene_drawing.jpg

CAPTIONS

(flake)

A single flake of graphene oxide roughly 40 microns wide, seen under an electron microscope, sits atop a copper support. Such "giant" flakes form into a gel-like liquid crystal in solution. (Credit Rice University/University of Colorado at Boulder)

(illustration)

Graphene oxide flakes in a solution align themselves with a director, a dimensionless vector that represents the preferred orientation of particles in a liquid crystal. (Credit Rice University/University of Colorado at Boulder)

Rice University

Related Graphene Articles from Brightsurf:

How to stack graphene up to four layers
IBS research team reports a novel method to grow multi-layered, single-crystalline graphene with a selected stacking order in a wafer scale.

Graphene-Adsorbate van der Waals bonding memory inspires 'smart' graphene sensors
Electric field modulation of the graphene-adsorbate interaction induces unique van der Waals (vdW) bonding which were previously assumed to be randomized by thermal energy after the electric field is turned off.

Graphene: It is all about the toppings
The way graphene interacts with other materials depends on how these materials are brought into contact with the graphene.

Discovery of graphene switch
Researchers at Japan Advanced Institute of Science and Technology (JAIST) successfully developed the special in-situ transmission electron microscope technique to measure the current-voltage curve of graphene nanoribbon (GNR) with observing the edge structure and found that the electrical conductance of narrow GNRs with a zigzag edge structure abruptly increased above the critical bias voltage, indicating that which they are expected to be applied to switching devices, which are the smallest in the world.

New 'brick' for nanotechnology: Graphene Nanomesh
Researchers at Japan advanced institute of science and technology (JAIST) successfully fabricated suspended graphene nanomesh (GNM) by using the focused helium ion beam technology.

Flatter graphene, faster electrons
Scientists from the Swiss Nanoscience Institute and the Department of Physics at the University of Basel developed a technique to flatten corrugations in graphene layers.

Graphene Flagship publishes handbook of graphene manufacturing
The EU-funded research project Graphene Flagship has published a comprehensive guide explaining how to produce and process graphene and related materials (GRMs).

How to induce magnetism in graphene
Graphene, a two-dimensional structure made of carbon, is a material with excellent mechani-cal, electronic and optical properties.

Graphene: The more you bend it, the softer it gets
New research by engineers at the University of Illinois combines atomic-scale experimentation with computer modeling to determine how much energy it takes to bend multilayer graphene -- a question that has eluded scientists since graphene was first isolated.

How do you know it's perfect graphene?
Scientists at the US Department of Energy's Ames Laboratory have discovered an indicator that reliably demonstrates a sample's high quality, and it was one that was hiding in plain sight for decades.

Read More: Graphene News and Graphene Current Events
Brightsurf.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com.