Magic Beans: UD Scientists, Working For Business Partners, Unveil New 'Green' Composite Made From Soy Oil

October 24, 1997

A patent disclosure filed Oct. 27 by University of Delaware scientists describes a technique for using soybean oil--rather than petroleum-derived resins--to produce inexpensive, lightweight and potentially biodegradable composites for tractors, supercars, bridges and military vehicles.

Initially developed for Deere & Co., the world's leading farm equipment maker, the UD technique involves chemically modifying soy oil, a commodity that's 50 percent cheaper than the polyester, epoxy and vinyl ester resins commonly used in composite manufacturing processes, says Richard P. Wool, professor of chemical engineering and director of the ACRES (Affordable Composites from Renewable Sources) project at UD. Soy-based resin and reinforcing fibers such as glass may then be injected into a mold, where the liquid solidifies to form the composite, Wool explains.

Chuck Neff, manager of plastics applications and development at Deere & Co., predicts a $50 million market for farm equipment made from soy-based composites. The firm is currently gearing up for a nationwide test of the new materials. Composites based on soy resins will initially be used to make 50 or 60 tractor components, Neff says. These parts will be distributed to dealers and installed on farm equipment for field testing within a wide variety of climates and working conditions.

The UD scientists unveiled a door-sized sample of the environmentally friendly new material--manufactured by Contemporary Products Inc. of Milwaukee to serve as the side of a hay bailer--during the John Deere New Millennium Plastics Expo, which took place Sept. 16-17 in Moline, Ill. Featuring a foam core encased on both sides by a glass-reinforced, soy-based composite, the 8-by-3-foot prototype weighed just 25 pounds, making it up to four times lighter than a comparable metal bailer part. Though the prototype contained preservatives, Wool says, subsequent formulations could easily be made to biodegrade under certain conditions. Ultimately, he adds, natural straw or hay fibers might even replace the reinforcing glass matrix within the soy-based composite.

"This first test part would replace standard metal sheeting materials," Wool says. "It would not corrode or rust, and it was made using a low-energy procedure that is far more benign than metal casting systems. Moreover, it is structurally comparable to metal, but at lower cost, while its lower weight provides better fuel efficiency."

The use of soybeans in composite materials--an idea first proposed by auto maker Henry Ford some 60 years ago--has thus far been limited primarily to surface coatings such as varnish, "but none of these applications require any structural strength from the resulting material," Wool notes. By comparison, he says, the UD process strengthens soy oil by chemically modifying its structure, resulting in more highly cross-linked, and therefore inherently stronger molecules. More than a dozen different chemical reactions have been developed and are currently being patented by UD.

Sponsored by the United Soybean Board based in St. Louis, the UD researchers have achieved composite stiffness, strength and toughness comparable to that of commercial vinyl-ester based composites, says UD doctoral candidate Shrikant Khot. And, Wool says, genetically engineered soybeans now make it possible to produce a consistently reliable product , thereby avoiding problems such as seasonable variations in the chemical composition of the natural oil.

The ACRES project is an interdisciplinary research team established to create inexpensive and reliable, fiber-reinforced composite materials from renewable sources. Along with Wool and Khot, the UD research team included chemist Ralph Zhao, postdoctoral research associate; Selim Kusefoglu, visiting professor within UD's Center for Composite Materials; scientist Guiseppe Palmese; and Anne Boyd, industrial liaison.

"This work, conducted as part of the ACRES program, is ideally suited and sufficiently challenging for graduate as well as undergraduate research," Wool says. "It also promises significant new technologies to support various U.S. industrial sectors."

University of Delaware

Related Composite Materials Articles from Brightsurf:

New composite material revs up pursuit of advanced electric vehicles
Scientists at Oak Ridge National Laboratory used new techniques to create a composite that increases the electrical current capacity of copper wires, providing a new material that can be scaled for use in ultra-efficient, power-dense electric vehicle traction motors.

Analyzing pros and cons of two composite manufacturing methods
Airplane wings and wind turbine blades are typically created using bulk polymerization in composite manufacturing facilities.

Visualization of functional components to characterize optimal composite electrodes
Researchers have developed a visualization method that will determine the distribution of components in battery electrodes using atomic force microscopy.

Study suggests polymer composite could serve as lighter, non-toxic radiation shielding
A new study suggests that a polymer compound embedded with bismuth trioxide particles holds tremendous potential for replacing conventional radiation shielding materials, such as lead.

Scientists develop stable luminescent composite material based on perovskite nanocrystals
An international team of scientists that includes researchers from ITMO University has developed a new composite material based on perovskite nanocrystals for the purpose of creating miniature light sources with improved output capacity.

Composite metal foams take the heat, move closer to widespread applications
Engineering researchers have demonstrated that composite metal foams (CMFs) can pass so-called 'simulated pool fire testing' with flying colors, moving the material closer to use in applications such as packaging and transportation of hazardous materials.

Using holograms helps in studying the quality of composite materials
Composite materials have a complicated structure and specified mechanical or physical properties.

Scientists develop a composite membrane for long-life zinc-based flow batteries
Researchers led by Profs. LI Xianfeng from the Dalian Institute of Chemical Physics (DICP) of the Chinese Academy of Sciences recently developed a composite membraneĀ for long-life zinc-based flow batteries.

An early warning system for damage in composite materials
A team at the National Institute of Standards and Technology (NIST) has developed a tool to monitor changes in widely used composite materials known as fiber reinforced polymers (FRPs), which can be found in everything from aerospace and infrastructure to wind turbines.

Novel composite antimicrobial film could take a bite out of foodborne illnesses
A novel composite film -- created by the bonding of an antimicrobial layer to conventional, clear polyethylene plastic typically used to vacuum-package foods such as meat and fish -- could help to decrease foodborne illness outbreaks, according to researchers in Penn State's College of Agricultural Sciences.

Read More: Composite Materials News and Composite Materials Current Events
Brightsurf.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com.