Bad Mileage: 98 tons of plants per gallon

October 26, 2003

Oct. 27, 2003 - A staggering 98 tons of prehistoric, buried plant material - that's 196,000 pounds - is required to produce each gallon of gasoline we burn in our cars, SUVs, trucks and other vehicles, according to a study conducted at the University of Utah.

"Can you imagine loading 40 acres worth of wheat - stalks, roots and all - into the tank of your car or SUV every 20 miles?" asks ecologist Jeff Dukes, whose study will be published in the November issue of the journal Climatic Change.

But that's how much ancient plant matter had to be buried millions of years ago and converted by pressure, heat and time into oil to produce one gallon of gas, Dukes concluded.

Dukes also calculated that the amount of fossil fuel burned in a single year - 1997 was used in the study - totals 97 million billion pounds of carbon, which is equivalent to more than 400 times "all the plant matter that grows in the world in a year," including vast amounts of microscopic plant life in the oceans.

"Every day, people are using the fossil fuel equivalent of all the plant matter that grows on land and in the oceans over the course of a whole year," he adds.

In another calcultation, Dukes determined that "the amount of plants that went into the fossil fuels we burned since the Industrial Revolution began [in 1751] is equal to all the plants grown on Earth over 13,300 years."

Explaining why he conducted the study, Dukes wrote: "Fossil fuel consumption is widely recognized as unsustainable. However, there has been no attempt to calculate the amount of energy that was required to generate fossil fuels, (one way to quantify the 'unsustainability' of societal energy use)."

The study is titled "Burning Buried Sunshine: Human Consumption of Ancient Solar Energy." In it, Dukes conducted numerous calculations to determine how much plant matter buried millions of years ago was required to produce the oil, natural gas and coal consumed by modern society, which obtains 83 percent of its energy needs from fossil fuels.

"Fossil fuels developed from ancient deposits of organic material, and thus can be thought of as a vast store of solar energy" that was converted into plant matter by photosynthesis, he explains. "Using published biological, geochemical and industrial data, I estimated the amount of photosynthetically fixed and stored [by ancient plants] carbon that was required to form the coal, oil and gas that we are burning today."

Dukes conducted the study while working as a postdoctoral fellow in biology at the University of Utah. He now works for the Carnegie Institution of Washington's Department of Global Ecology on the campus of Stanford University in California.

How the calculations were done

To determine how much ancient plant matter it took to eventually produce modern fossil fuels, Dukes calculated how much of the carbon in the original vegetation was lost during each stage of the multiple-step processes that create oil, gas and coal.

He looked at the proportion of fossil fuel reserves derived from different ancient environments: coal that formed when ancient plants rotted in peat swamps; oil from tiny floating plants called phytoplankton that were deposited on ancient seafloors, river deltas and lakebeds; and natural gas from those and other prehistoric environments. Then he examined the efficiency at which prehistoric plants were converted by heat, pressure and time into peat or other carbon-rich sediments.

Next, Dukes analyzed the efficiency with which carbon-rich sediments were converted to coal, oil and natural gas. Then he studied the efficiency of extracting such deposits. During each of the above steps, he based his calculations on previously published studies.

The calculations showed that roughly one-eleventh of the carbon in the plants deposited in peat bogs ends up as coal, and that only one-10,750th of the carbon in plants deposited on ancient seafloors, deltas and lakebeds ends up as oil and natural gas.

Dukes then used these "recovery factors" to estimate how much ancient plant matter was needed to produce a given amount of fossil fuel. Dukes considers his calculations good estimates based on available data, but says that because fossil fuels were formed under a wide range of environmental conditions, each estimate is subject to a wide range of uncertainty.

Plants in your tank?

Dukes calculated ancient plant matter needed for a gallon of gasoline in metric units:

Dukes made similar calculations for oil, natural gas and coal to determine that it took 44 million billion kilograms (97 million billion pounds) of carbon in ancient plant matter to produce all the fossil fuel used in 1997. That includes 29 million billion kilograms of prehistoric plants to produce a year's worth of oil (including gasoline), almost 15 million billion kilograms of buried plant matter to make all the natural gas used in 1997, and 27,000 billion kilograms of dead plants to produce all the coal used in the same year.

"It took an incredible amount of plant matter to generate the fossil fuels we are using today," says Dukes. "The new contribution of this research is to enable us to picture just how inefficient and unsustainable fossil fuels are - inefficient in terms of the conversion of the original solar energy to fossil fuels. Fortunately, it is much more efficient to use modern energy sources like wind and solar. As the reasons keep piling up to switch away from fossil fuels, it is important that we develop these modern power sources as quickly as possible."

What about modern plant biomass?

Unlike the inefficiency of converting ancient plants to oil, natural gas and coal, modern plant "biomass" can provide energy more efficiently, either by burning it or converting into fuels like ethanol. So Dukes analyzed how much modern plant matter it would take to replace society's current consumption of fossil fuels.

He began with a United Nations estimate that the total energy content of all coal, oil and natural gas used worldwide in 1997 equaled 315,271 million billion joules (a unit of energy). He divided that by the typical value of heat produced when wood is burned: 20,000 joules per gram of dry wood. The result is that fossil fuel consumption in 1997 equaled the energy in 15.8 trillion kilograms of wood. Dukes multiplied that by 45 percent - the proportion of carbon in plant material - to calculate that fossil fuel consumption in 1997 equaled the energy in 7.1 trillion kilograms of carbon in plant matter.

Studies have estimated that all land plants today contain 56.4 trillion kilograms of carbon, but only 56 percent of that is above ground and could be harvested. So excluding roots, land plants thus contain 56 percent times 56.4, or 31.6 trillion kilograms of carbon.

Dukes then divided the 1997 fossil fuel use equivalent of 7.1 trillion kilograms of carbon in plant matter by 31.6 trillion kilograms now available in plants. He found we would need to harvest 22 percent of all land plants just to equal the fossil fuel energy used in 1997 - about a 50 percent increase over the amount of plants now removed or paved over each year.

"Relying totally on biomass for our power - using crop residues and quick-growing forests as fuel sources - would force us to dedicate a huge part of the landscape to growing these fuels," Dukes says. "It would have major environmental consequences. We would have to choose between our rain forests and our vehicles and appliances. Biomass burning can be part of the solution if we use agricultural wastes, but other technologies have to be a major part of the solution as well - things like wind and solar power."
-end-
University of Utah Public Relations
201 S Presidents Circle, Room 308
Salt Lake City, Utah 84112-9017
(801) 581-6773 fax: 585-3350
www.utah.edu/unews

University of Utah

Related Solar Energy Articles from Brightsurf:

'Transparent solar cells' can take us towards a new era of personalized energy
Solar power has shown immense potential as a futuristic, 'clean' source of energy.

CU Denver researcher analyzes the use of solar energy at US airports
By studying 488 public airports in the United States, University of Colorado Denver School of Public Affairs researcher Serena Kim, PhD, found that 20% of them have adopted solar photovoltaic (PV), commonly known as solar panels, over the last decade.

Researchers develop molecule to store solar energy
Researchers at Linköping University, Sweden, have developed a molecule that absorbs energy from sunlight and stores it in chemical bonds.

Converting solar energy to hydrogen fuel, with help from photosynthesis
Global economic growth comes with increasing demand for energy, but stepping up energy production can be challenging.

New nanodevice could use solar energy to produce hydrogen
Amsterdam, June 9, 2020 - Solar energy is considered by some to be the ultimate solution to address the current energy crisis and global warming and the environmental crises brought about by excessive consumption of fossil fuels.

Physicists develop approach to increase performance of solar energy
Experimental condensed matter physicists in the Department of Physics at the University of Oklahoma have developed an approach to circumvent a major loss process that currently limits the efficiency of commercial solar cells.

Lasers etch a 'perfect' solar energy absorber
In Light: Science and Applications, University of Rochester researchers demonstrate how laser etching of metallic surfaces creates the ''perfect solar energy absorber.'' This not only enhances energy absorption from sunlight, but also reduces heat dissipation at other wavelengths.

Mapping the energy transport mechanism of chalcogenide perovskite for solar energy use
Researchers from Lehigh University have, for the first time, revealed first-hand knowledge about the fundamental energy carrier properties of chalcogenide perovskite CaZrSe3, important for potential solar energy use.

New hybrid device can both capture and store solar energy
Researchers have reported a new device that can both efficiently capture solar energy and store it until it is needed, offering promise for applications ranging from power generation to distillation and desalination.

Materials that can revolutionize how light is harnessed for solar energy
Columbia scientists designed organic molecules capable of generating two excitons per photon of light, a process called singlet fission.

Read More: Solar Energy News and Solar Energy Current Events
Brightsurf.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com.