Dynamic catalytic converters for clean air in the city

October 26, 2017

Reducing pollutant emission of vehicles and meeting stricter exhaust gas standards are major challenges when developing catalytic converters. A new concept might help to efficiently treat exhaust gases after the cold start of engines and in urban traffic and to reduce the consumption of expensive noble metal. It is based on the interaction between platinum and the cerium oxide carrier to control catalytic activity by short-term changes of the engine's operation mode, researchers report in the journal Angewandte Chemie (Applied Chemistry).

Thanks to its good catalytic properties, platinum is often applied in catalytic converters of vehicles. Presently, about 60% of European platinum trade are used for this purpose. Using a diesel oxidation catalytic converter (DOC), in which afterburning of hydrocarbons and carbon monoxide takes place, the scientists of Karlsruhe Institute of Technology (KIT) and their partners found that the particle size and oxidation state of the platinum component during operation can be modified specifically. Interactions between the carrier material and the applied noble metal play an important role. The results reflect a highly dynamic catalytic converter surface that reacts extremely sensitively to external impacts, such as exhaust gas composition. The researchers present ways of using this dynamics to improve catalytic converters.

"The special thing is that we can adjust the size and state of the noble metal nanoparticles on the surface of the catalytic converter. The methods enable us to do this under relevant and even real operation conditions and, hence, to directly adjust the catalytic activity of materials," says Andreas Gänzler, scientist of KIT's Institute for Chemical Technology and Polymer Chemistry (ITCP) and main author of the study "Tuning the Structure of Platinum Particles on Ceria In Situ for Enhancing the Catalytic Performance of Exhaust Gas Catalysts" published in the latest issue of the journal Angewandte Chemie (Applied Chemistry). In their study, the researchers demonstrated how sensitively the state of platinum reacts to the composition, i.e. the ratio of carbon monoxide and oxygen, and the temperature of the exhaust gas. Engine operation already is modified specifically in exhaust gas aftertreatment systems used today. In this way, exhaust gas composition is adjusted for the regeneration of particulate filters or NOx storage catalytic converters. The study reveals that it is also possible to optimally set the active platinum component in order to enhance activity of the catalytic converter and reduce the consumption of noble metal.

In the course of the German-French cooperation project, complex methods were used to observe the materials under operation conditions. By means of environmental transmission electron microscopy (ETEM), structural modifications on the atomic level of the material were visualized. X-ray absorption spectroscopy at the SOLEIL synchrotron in the French St. Aubin and at the KARA Karlsruhe Research Accelerator of KIT was applied to study the processes under realistic exhaust gas conditions. "Based on these observations of catalytic converter materials under real conditions, findings can be transferred much more quickly to application," Gänzler points out.

With the help of the findings obtained, catalytic activity of diesel oxidation catalytic converters can be enhanced at low temperature. From their observations, the scientists derived a promising basic concept to specifically adjust the size and structure of platinum particles as a function of the catalytic activity required during operation. The concept can be used among others to significantly improve catalytic performance after the cold start of combustion engines and when driving in urban traffic. "The structure of the noble metal nanoparticles can be influenced by short-term modifications of the engine operation mode, for instance," Gänzler says.

Based on the findings, current and future new types of catalytic converters can be improved and their economic efficiency can be increased, as the noble metal concentration can be reduced by up to 50%. The study that is considered "one of the big highlights in catalytic converter research" by Professor Jan-Dierk Grunwaldt of ITCP meets with big interest of experts. It was carried out in the course of the project "ORCA - Oxidation/Reduction Catalytic Converter for Diesel Vehicles of the Next Generation" that is part of the Deufrako German-French research collaboration. The project is funded with EUR 960,000 by the Federal Ministry for Economic Affairs and Energy. Apart from KIT, the Institut de Recherches sur la Catalyse et l'Environnement de Lyon (IRCELYON), TU Darmstadt, the Solvay company, and Umicore AG & Co. KG, a materials technology and recycling company in Hanau, take part in the collaboration project.
-end-
Andreas M. Gänzler, Maria Casapu, Philippe Vernoux, Stéphane Loridant, Francisco J. Cadete Santos Aires, Thierry Epicier, Benjamin Betz, Rüdiger Hoyer, and Jan-Dierk Grunwaldt: Tuning the Structure of Platinum Particles on Ceria In Situ for Enhancing the Catalytic Performance of Exhaust Gas Catalysts. DOI: 10.1002/anie.201707842

http://onlinelibrary.wiley.com/doi/10.1002/anie.201707842/abstract

More information:

http://www.itcp.kit.edu/abgaszentrum (in German only)

More about the KIT Mobility Systems Center http://www.kit.edu/research/6720.php

For further information, please contact:

Kosta Schinarakis, Science Scout, Phone: 49-721-608-41956, Fax: 49-721-608-43658, Email: schinarakis@kit.edu

Being "The Research University in the Helmholtz Association," KIT creates and imparts knowledge for the society and the environment. It is the objective to make significant contributions to the global challenges in the fields of energy, mobility and information. For this, about 9,300 employees cooperate in a broad range of disciplines in natural sciences, engineering sciences, economics, and the humanities and social sciences. KIT prepares its 26,000 students for responsible tasks in society, industry, and science by offering research-based study programs. Innovation efforts at KIT build a bridge between important scientific findings and their application for the benefit of society, economic prosperity, and the preservation of our natural basis of life.

Since 2010, the KIT has been certified as a family-friendly university.

This press release is available on the internet at http://www.sek.kit.edu/english/press_office.php.

Karlsruher Institut für Technologie (KIT)

Related Catalytic Converters Articles from Brightsurf:

Successful improvement of the catalytic activity of photosynthetic CO2 fixing enzyme Rubisco
A research group consisting of Associate Professor FUKAYAMA Hiroshi (Kobe University) and Professor MATSUMURA Hiroyoshi (Ritsumeikan University) et al. have succeeded in greatly increasing the catalytic activity of Rubisco, the enzyme which fixes carbon from CO2 in plant photosynthesis.

Heat smarter, not harder -- How microwaves make catalytic reactions more efficient
Scientists at Tokyo Institute of Technology (Tokyo Tech) and International Christian University (ICU) demonstrate a synchrotron X-ray spectroscopy-based method by which the local temperatures of metal nanoparticles can be measured under microwaves.

Tandem catalytic system efficiently converts carbon dioxide to methanol
Boston College chemists have used a tandem catalytic system to efficiently convert carbon dioxide to methanol.

Dancing chemicals: Innovative catalytic reaction for low-cost synthesis of aromatic esters
Aromatic esters are a versatile group of compounds that are commonly used as feedstock in the chemical industry.

Newly designed ligands for a catalytic reaction to synthesize drugs and useful compounds
In a new study, scientists at Gwangju Institute of Science and Technology developed novel ligand molecules, which facilitate a catalytic reaction that generates useful compounds called chromanones.

Scientists reveal hidden catalytic surface of Ni-Au core-shell in CO2 hydrogenation
Dr. LIU Wei and his colleagues from the Dalian Institute of Chemical Physics (DICP) of the Chinese Academy of Sciences have found that the core-shell configuration of a Ni-Au catalyst was lost during the actual reaction and recovered afterwards.

Scientists reveal catalytic mechanism of lovastatin hydrolase
The research team led by Prof. LU Xuefeng from the Qingdao Institute of Bioenergy and Bioprocess Technology (QIBEBT), Chinese Academy of Sciences (CAS), revealed the catalytic mechanism and structure-function relationship of the specific and efficient lovastatin hydrolase PcEST.

Catalytic protocells get zingy
Artificial cells capable of oxygen gas production and chemical signalling have been prepared using a combination of synthetic and biological catalysts through an international collaboration between the University of Bristol and the University of Padua in Italy.

Imaging technique gives catalytic 2D material engineering a better view
A scanning electrochemical cell imaging technique shows how nanoscale structural features affect the catalytic activity of MoS2 monolayers for hydrogen evolution reactions, report researchers at Kanazawa University in Angewandte Chemie International Edition.

Smart reactions through online design of catalytic pockets
Mapping the three-dimensional structure of catalytic centers helps to design new and improved catalysts.

Read More: Catalytic Converters News and Catalytic Converters Current Events
Brightsurf.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com.