Nav: Home

Ashes to concrete

October 29, 2019

Coal ash is the less notorious byproduct of coal-fired power plants. It's the residual solid waste that comes from burning coal. While it doesn't have the same deleterious reputation of its airborne counterparts, tens of millions of tons of ash does up in landfills each year. Now researchers from Drexel University believe they have found a use for the powdery residue - one that could help make concrete more durable and crack-free.

Recently reported in the journal Cement and Concrete Composites, their discovery is a method for turning waste ash into a special concrete additive that helps to fortify its internal structure by promoting a uniform hardening process from the inside out. This additive - a high-performing, functional aggregate - could shorten the time it takes for concrete to harden and improve its durability by lowering the potential for crack formation, according to the researchers.

-Just the Right Mix-

Concrete is made from a mixture of fine powder and coarse rock particles, called aggregates, bonded by a mineral glue called a "cementing matrix," made of cement and water. The aggregates form the strong internal structure of the concrete as the cementing matrix hardens to bind the ingredients together in a process called curing. For concrete to reach its maximum durability, the cement must mix thoroughly with water during the curing process so it all dries - and cures - at the same time.

"This is a very important part of the process because if the concrete dries too quickly during its curing, due to added water shortage, it can form cracks and other flaws. These drying shrinkage cracks cause the surface to be susceptible to aggressive fluid ingress creating concrete durability problems such as corrosion, salt damage, or freeze-thaw damage," said Yaghoob Farnam, PhD, an assistant professor in Drexel's College of Engineering and principle investigator of the research.

To ensure even curing there are a number of things concrete contractors might have to do, including constantly spraying the concrete, covering it with a membrane to keep it moist, submerging it in water or creating pools of water on its surface. All of these strategies consume time and resources and are complex enough that flaws could creep into the process. To help prevent this, in the last decade researchers have developed an internal curing concept that uses porous lightweight aggregate to aid the curing process. The aggregate can maintain a consistent level of moisture inside the concrete to help it cure evenly from the inside out.

"The use of a high-performance lightweight aggregate in concrete can be a solution to properly provide sufficient water reservoirs inside concrete as water is needed over time for curing cementitious matrix," Farnam said.

-Working with Concrete is Hard-

Concrete is one of the most widely used building materials in the world. It's the material of choice for most new high-volume roads, buildings, bridges and many other structures because of its durability and relative ease of application.

But one drawback to using concrete is that it requires just the right atmospheric conditions to allow proper mixing and even curing - not too hot, not too cold, not too dry.

Getting the exact amount of moisture inside concrete is difficult because the powder and aggregates form a tight cementing matrix that is difficult to penetrate once it begins drying. If the outside of the concrete dries out before the inside cures it can result in a weaker structure. As a result, contractors basically have one shot to get the ratio of liquid to solid just right, quickly and thoroughly mix it and pour the concrete before it starts drying.

"This is a common problem in concrete, so called 'concrete drying,' creates drying cracks and lower concrete strength and durability," said Mohammad Balapour, a doctoral researcher in Farnam's lab and lead author of the paper.

-Finding a Cure-

To give contractors more leeway in the process, Farnam's team, in collaboration with faculty members in the Drexel's Civil, Architectural, and Environmental Engineering Department, Grace Hsuan, PhD, and Sabrina Spatari, PhD, as well as E.J. Garboczi, PhD, from National Institute of Standards and Technology, looked at how functional lightweight aggregates can be developed from coal ash and used in concrete.

The concrete industry has limited access to natural or synthetic lightweight aggregates, according to Farnam, because of its dependency on limited sources of aggregate material. Farnam's lab wanted to design an aggregate product that had optimal characteristics for mixing, strength and porousness - and find a way to make it out of an abundant waste material.

"The solution we came up with involved recycling this waste product, coal ash, into a porous, lightweight aggregate with excellent performance characteristics that could be produced at a lower cost than current natural and synthetic options," Farnam said. "This material and process would not only benefit the concrete industry by improving the quality of their products, but it could also help keep coal ash out of landfills."

The material they came up with is called "spherical porous reactive aggregate" - SPoRA, for short. It is made by combining the ash with chemicals that facilitate aggregate sintering and bonding, forming them into tiny spheres and then baking them at 1,160 degrees Celsius for a few minutes.

The end product is an aggregate pellet that can hold almost half its weight in water, which is better than traditional lightweight aggregates. And, as importantly, it can release that water at a regular rate from inside to the cementing matrix as it cures.

In the paper they report that two types of SPoRA perform better than some traditional lightweight aggregate materials - shale, clay and slate, and foamed glass - on measurements of shape, porousness, relative weight and ability to absorb and release water. These are all key metrics related to its ability to integrate with the cement mixture and release its moisture at the right time and in the right part of the structure as it forms.

"As the concrete begins to cure on the outside, the aggregate pellets are also releasing their moisture to help it cure from the inside out as well," Balapour said. "This approach can help to maximize the durability of the concrete. And the SPoRA-making process is simple enough to produce aggregates of any size and water capacity, so we believe it could be used for a number of applications in the construction industry."

Recycling a waste product like coal ash not only reduces the cost of making lightweight aggregate, but it also ensures that concrete producers will have access to it.

"Taking something that is a waste product - with mountains of it in landfills - and turning it into a useful product is an excellent example of how science can help to find sustainable solutions to society's challenges," Farnam said. "Not only does this help protect our natural environment but will also help to improve our built environment."
-end-
In addition to Farnam, Balapour, Hsuan, Spatari and Garboczi, Weijin Zhao and Nay Ye Oo, from Drexel; and Pieter Billen, from the University of Antwerp assisted with this research. The research was funded by the National Science Foundation.

Drexel University

Related Cement Articles:

Chinese scientists optimize strontium content to improve bioactive bone cement
Researchers from the Shenzhen Institutes of Advanced Technology (SIAT) of the Chinese Academy of Sciences have developed a new strontium-substituted bioactive glass (BG) bone cement that optimizes the concentration of strontium to improve peri-implant bone formation and bone-implant contact.
Concrete solutions that lower both emissions and air pollution
Some common strategies to reduce the greenhouse gas emissions of concrete production could have unintended consequences for local air pollution and related health damages, according to a study from the University of California, Davis.
'Wood' you like to recycle concrete?
Scientists at The University of Tokyo studied a method for recycling unused concrete with wood fibers.
Buildings can become a global CO2 sink if made out of wood instead of cement and steel
A material revolution replacing cement and steel in urban construction by wood can have double benefits for climate stabilization.
New optical technique captures real-time dynamics of cement setting
Researchers have developed a nondestructive and noninvasive optical technique that can determine the setting times for various types of cement paste, which is used to bind new and old concrete surfaces.
Cytotoxicity and physical properties of glass ionomer cement containing flavonoids
At the 97th General Session & Exhibition of the International Association for Dental Research (IADR), held in conjunction with the 48th Annual Meeting of the American Association for Dental Research (AADR) and the 43rd Annual Meeting of the Canadian Association for Dental Research (CADR), Aline de Castilho, University of Campinas, Brazil, presented a poster on 'Cytotoxicity and Physical Properties of Glass Ionomer Cement Containing Flavonoids.'
Cement as a climate killer: Using industrial waste to produce carbon neutral alternatives
Producing cement takes a big toll on our climate: Around eight per cent of annual global carbon dioxide emissions can be attributed to this process.
Preventing concrete bridges from falling apart
A new study published in EPJ B examines the adverse effects of the adsorption of natural gas constituents found in our environment -- and mixtures of several such gases -- into one of the materials that make up concrete: cement hydrate.
New 3D-printed cement paste gets stronger when it cracks -- just like structures in nature
Purdue University researchers have 3D-printed cement paste, a key ingredient of the concrete and mortar used to build various elements of infrastructure, that gets tougher under pressure like the shells of arthropods such as lobsters and beetles.
Spheres can make concrete leaner, greener
Rice University scientists make micron-sized calcium silicate spheres that could lead to stronger and greener concrete, the world's most-used synthetic material.
More Cement News and Cement Current Events

Trending Science News

Current Coronavirus (COVID-19) News

Top Science Podcasts

We have hand picked the top science podcasts of 2020.
Now Playing: TED Radio Hour

Making Amends
What makes a true apology? What does it mean to make amends for past mistakes? This hour, TED speakers explore how repairing the wrongs of the past is the first step toward healing for the future. Guests include historian and preservationist Brent Leggs, law professor Martha Minow, librarian Dawn Wacek, and playwright V (formerly Eve Ensler).
Now Playing: Science for the People

#566 Is Your Gut Leaking?
This week we're busting the human gut wide open with Dr. Alessio Fasano from the Center for Celiac Research and Treatment at Massachusetts General Hospital. Join host Anika Hazra for our discussion separating fact from fiction on the controversial topic of leaky gut syndrome. We cover everything from what causes a leaky gut to interpreting the results of a gut microbiome test! Related links: Center for Celiac Research and Treatment website and their YouTube channel
Now Playing: Radiolab

The Flag and the Fury
How do you actually make change in the world? For 126 years, Mississippi has had the Confederate battle flag on their state flag, and they were the last state in the nation where that emblem remained "officially" flying.  A few days ago, that flag came down. A few days before that, it coming down would have seemed impossible. We dive into the story behind this de-flagging: a journey involving a clash of histories, designs, families, and even cheerleading. This show is a collaboration with OSM Audio. Kiese Laymon's memoir Heavy is here. And the Hospitality Flag webpage is here.