Researchers produce strong copper that retains ductility

October 30, 2002

Combining old-fashioned metal-working techniques with modern nanotechnology, engineers at The Johns Hopkins University have produced a form of pure copper metal that is six times stronger than normal, with no significant loss of ductility.

The achievement, reported in the Oct. 31 issue of the journal "Nature," is important because earlier attempts to strengthen a pure metal such as copper have almost always resulted in a material that is much less ductile, meaning it is more likely to fracture when it is stretched. Strength, on the other hand, refers to how much stress a metal can tolerate before its shape is permanently deformed.

"We were able to get the strength of the pure copper up to and beyond that of copper alloys without adding any other metals to it and without sacrificing ductility," said En Ma, a professor in the Department of Materials Science and Engineering and a co-author of the paper. Ma said that such strong and tough pure metals could have applications in microelectromechanical systems, for which suitable alloys may be more difficult to produce and may be more prone to corrosion, and in biomedical devices, in which a pure metal may be preferable to alloys that could expose the body to toxic metallic or non-metallic elements.

To make the pure copper stronger, the Johns Hopkins engineers had to employ extreme cold and mechanical manipulation, followed by a carefully designed heat treatment. "A real significance of this project was that we showed what traditional metallurgical processing can do in the new era of nanotechnology," said Yinmin Wang, a doctoral student and lead author of the paper. Ma is Wang's faculty advisor.

The researchers started with a 1-inch cube of pure commercial copper and dipped it into liquid nitrogen for three to five minutes at a temperature of -196 degrees C (-321 degrees F). After removing it, the researchers rolled the copper flat, cooling the sample between rolling passes, to a final thickness of about 1 mm. This affected the metal's microscopic crystals, each consisting of atoms arranged in a lattice pattern. The severe rolling deformation created a high density of dislocations, meaning atomic planes had been moved out of their proper position within the lattice. The cold temperatures kept these defects from quickly moving back into their original alignment.

Next, the copper was placed in an oven for three minutes to bake at 200 degrees C (392 degree F.) "As they heated up, the dislocations began to disappear in a process called 're-crystalization,'" Wang explained. "New, ultra fine crystal grains formed that were almost dislocation-free. The higher the stored dislocations density after rolling, the finer the re-crystallized grains during heating. In our copper, these new grains were only a couple of hundred nanometers in size, several hundred times smaller than the original crystals, making the copper much stronger than it was in its original form."

This change in strength occurred because of the reduction in grain size to a level similar to that of nanocrystalline materials, which are defined as materials with grain sizes less than about 100 nanometers. (One nanometer is one millionth of a millimeter). When the grains are smaller, Ma explained, more grain boundaries exist to block the moving dislocations, and the metal's strength is increased.

By carefully controlling the temperature and the timing when they heated the metal, however, the Johns Hopkins engineers allowed about 20-25 percent of the copper's crystals to grow to a larger size in a process called "abnormal grain growth," meaning non-uniform grain growth. According to the researchers, this final mix of ultra fine grains and larger ones, described as a "bimodal distribution," is what gave the new copper its coexisting high strength and ductility. "By manipulating the grain size distribution starting from a nanometer-scaled grain structure, we reached an inhomogeneous microstructure that is stable during stretching," Ma said. "That reinstated the copper's ability to stretch uniformly without fracture, a feature very important for the formability of the high-strength copper when processing it into different shapes in forming operations."

Next, the researchers plan to test their process with other pure metals as well as metal alloys, which are widely used in manufacturing, to see if it produces the same change in mechanical properties. "Materials with uniformly nanocrystalline grains can give you very high strength, but usually not enough ductility," Ma said. "They are also difficult to process, often involving compaction of tiny nanocrystalline powders. If you want a metal that is both strong and ductile, you may want to go the bulk processing route described in this Nature paper. Our work demonstrates that extraordinary properties can be derived from a nanostructured material by first creating and then tailoring the ultra fine grain structures."
-end-
Other co-authors of the "Nature" paper were Mingwei Chen, an associate research scientist, and Fenghua Zhou, a postdoctoral fellow, both affiliated with the Johns Hopkins Department of Mechanical Engineering. The National Science Foundation provided funding for the research.

Images available of the researchers, a sample of the strong copper and microscopic views of the metal; contact Phil Sneiderman

Related Links: En Ma's Web Page: http://www.jhu.edu/~matsci/people/faculty/ma/ma.html
Department of Materials Science and Engineering: http://www.jhu.edu/~matsci

THE JOHNS HOPKINS UNIVERSITY
OFFICE OF NEWS AND INFORMATION
3003 N. Charles Street, Suite 100
Baltimore, Maryland 21218-3843
Phone: 410-516-7160; Fax 410-516-5251

Johns Hopkins University

Related Copper Articles from Brightsurf:

New material 'mines' copper from toxic wastewater
A team of scientists led by Berkeley Lab has designed a new material -- called ZIOS (zinc imidazole salicylaldoxime) -- that targets and traps copper ions from wastewater with unprecedented precision and speed.

Team uses copper to image Alzheimer's aggregates in the brain
A proof-of-concept study conducted in a mouse model of Alzheimer's disease offers new evidence that copper isotopes can be used to detect the amyloid-beta protein deposits that form in the brains of people living with -- or at risk of developing -- Alzheimer's.

Copper boosts pig growth, and now we know why
Pigs have better feed conversion rates with copper in their diets, but until now, scientists didn't fully understand why.

Cancer cells spread using a copper-binding protein
Researchers at Chalmers University of Technology, Sweden, have shown that the Atox1 protein, found in breast cancer cells, participates in the process by which cancer cells metastasise.

Adding copper strengthens 3D-printed titanium
Successful trials of titanium-copper alloys for 3D printing could kickstart a new range of high-performance alloys for medical device, defence and aerospace applications.

Matrix could ensure vital copper supplies
Researchers have identified a matrix of risks that the mining industry must overcome to unlock vitally important copper reserves.

Do microbes control the formation of giant copper deposits?
One of the major issues when studying ore deposits formed in surficial or near-surface environments is the relationship between ore-forming processes and bacteria.

Copper compound as promising quantum computing unit
Chemists at Friedrich Schiller University in Jena (Germany) have now synthesised a molecule that can perform the function of a computing unit in a quantum computer.

Copper ions flow like liquid through crystalline structures
Materials scientists have sussed out the physical phenomenon underlying the promising electrical properties of a class of materials called superionic crystals through the investigation of CuCrSe2.

A copper bullet for tuberculosis
Tuberculosis is a sneaky disease, and the number one cause of death from infectious disease worldwide.

Read More: Copper News and Copper Current Events
Brightsurf.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com.