New Ultrafine Metal Powder Production Process

October 31, 1997

UNIVERSITY PARK, PA. --- Researchers at Penn State's Applied Research Laboratory (ARL) have developed a faster, cheaper and cleaner method of producing ultrafine metal powders, such as silver used in solder, dental fillings, circuit boards, high-speed photographic film and a host of other applications.

Dr. Jogender Singh, ARL senior research associate and associate professor of materials science and engineering, led development of the process. He was recently honored with an R&D Magazine 100 award which recognizes 100 of the best new discoveries or inventions of the year.

Most recently, Singh says, his group has also shown that the new process can substitute for electroplating in some applications by depositing coatings or patterns on metal surfaces. In addition, he expects, eventually, to be able to use the process to produce carbon nanotubes, the invisible carbon wires recently discovered by others, that have stirred so much interest in the microelectronics industry.

Singh initially developed the new process for silver and nickel. Using a household blender, a laser and inexpensive reaction materials, he showed that he could produce ultrafine silver powder, 100 times finer than any now on the market. The silver powder is purer and more uniform too. In the invisible 1 to 100 nanometer range, the individual particles are smaller than the smallest bacteria or about the size of a small virus.

Singh makes the silver powder by putting silver nitrate, an inexpensive, colorless liquid used in pharmaceuticals, photography, and dyes, in the blender with a reducing agent at room temperature. Next, he whirls the mixture while irradiating it in bursts with the laser. As a laser burst hits the liquid, it creates a tiny "hot spot" where the silver nitrate and reducing agent can react. The result is a tiny particle of silver.

Singh can control the size and, to an extent, the shape of the particle by altering the laser energy, rotation speed and constituents of the reaction. He can make solid particles, porous particles, composite particles and even hollow nanotubes of an silver-nickel alloy. Unfortunately, he says, so far, the production rate of carbon nanotubes has been limited and uneconomical.

Singh notes that the new process can produce silver and nickel particles at a rate of .5 to 3 grams per minute, higher than any other technique now available, except grinding. Grinding, however, cannot make particles in the nanometer range.

By focusing the laser on a metal plate bathed in the reaction solution, the technique can be used to deposit silver or nickel in any desired pattern. The process could replace electroplating in some applications and potentially could be used to fabricate circuit boards or other super small microelectronics.

Extracting waste silver from spent photographic solutions is another possible application. Singh notes that the reaction materials used in the new process are environmentally friendly. Hydrazine, a carcinogen, is used in the commercial reactions most often used to produce silver powder currently.

Singh's co-inventors include his ARL associates, Eric Whitney and Paul Denney. The process is being patented and is available for licensing. Singh has published several articles on the work, most recently, "Nanoparticle Synthesis By A Novel Laser-Liquid-Solid Interaction Technique" in the Proceedings of the International Conference on Recent Advances in Metallurgical Process (Bangalore, India) and "A Novel Technique in Synthesis of Silver Nanoparticles By Laser-Liquid Interaction" in the current issue of the Journal of Materials Science.
-end-
Note: Contact Dr. Singh at (814) 863-4812 or jxs46@psu.edu

For other Penn State news, please visit our Home Page on the Web at: http://www.psu.edu/ur/ Also browse this release at EurekAlert!, a comprehensive news server for up-to-date research in science, medicine, and engineering at http://www.eurekalert.org/

Penn State

Related Carbon Nanotubes Articles from Brightsurf:

How plantains and carbon nanotubes can improve cars
Researchers from the University of Johannesburg have shown that plantain, a starchy type of banana, is a promising renewable source for an emerging type of lighter, rust-free composite materials for the automotive industry.

New production method for carbon nanotubes gets green light
A new method of producing carbon nanotubes -- tiny molecules with incredible physical properties used in touchscreen displays, 5G networks and flexible electronics -- has been given the green light by researchers, meaning work in this crucial field can continue.

Growing carbon nanotubes with the right twist
Researchers synthetize nanotubes with a specific structure expanding previous theories on carbon nanotube growth.

Research shows old newspapers can be used to grow carbon nanotubes
New research has found that old newspaper provide a cheap and green solution for the bulk production of single walled carbon nanotubes.

Clean carbon nanotubes with superb properties
Scientists at Aalto University, Finland, and Nagoya University, Japan, have found a new way to make ultra-clean carbon nanotube transistors with superior semiconducting properties.

Dietary fiber effectively purifies carbon nanotubes
A dietary fiber can help separate out semiconducting carbon nanotubes used for making transistors for flexible electronics.

Why modified carbon nanotubes can help the reproducibility problem
Scientists at Tokyo Institute of Technology (Tokyo Tech) conducted an in-depth study on how carbon nanotubes with oxygen-containing groups can be used to greatly enhance the performance of perovskite solar cells.

Tensile strength of carbon nanotubes depends on their chiral structures
Single-walled carbon nanotubes should theoretically be extremely strong, but it remains unclear why their experimental tensile strengths are lower and vary among nanotubes.

New study reveals carbon nanotubes measurement possible for the first time
Swansea University scientists report an entirely new approach to manipulation of carbon nanotubes that allows physical measurements to be made on carbon nanotubes that have previously only been possible by theoretical computation.

Neural networks will help manufacture carbon nanotubes
A team of scientists from Skoltech's Laboratory of Nanomaterials proposed a neural-network-based method for monitoring the growth of carbon nanotubes, preparing the ground for a new generation of sophisticated electronic devices.

Read More: Carbon Nanotubes News and Carbon Nanotubes Current Events
Brightsurf.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com.