Carving new frontiers for ion-beam technology

November 01, 2004

BERKELEY, CA -- An ion-beam system that simultaneously combines focused beams of electrons and positive ions promises to improve the versatility, efficiency, and economy of this important technology. The new system was developed by researchers at the Department of Energy's Lawrence Berkeley National Laboratory, who report its principles and applications in the 8 November 2004 issue of "Applied Physics Letters."

Focused ion beams are important in the semiconductor industry, where they are used to carve structures with dimensions measured in billionths of a meter, repair defects in masks used for photolithography, isolate and analyze elements of integrated circuits, "dope" semiconductors with specific atomic species, and perform other tasks.

Focused ion beams have also been used to create images of surfaces, pattern thin films for dense magnetic storage, analyze the chemical content of samples, and investigate biological systems. And because ion beams can shape materials with microscopic precision, they can micromachine miniature medical implants, such as cardiac stents that hold weak blood vessels open.

Complicating these applications, however, is the fact that "problems arise when positive ions are used for imaging or micromachining insulating materials," says Qing Ji, who authored the "Applied Physics Letters" report with her colleagues Lili Ji, Ye Chen, and Ka-Ngo Leung.

Qing Ji is a postdoctoral fellow in the Center for Imaging and Mesoscale Structures at Harvard University and a guest at Berkeley Lab. Coauthors Lili Ji and Chen are with Berkeley Lab's Accelerator and Fusion Research Division (AFRD) and the Department of Nuclear Engineering at the University of California at Berkeley, as is Leung, who heads the Plasma and Ion Source Technology Group in AFRD.

The trouble with using positive-ion beams on insulating samples, Ji explains, is that "the target material is charged by the positive ions; as the positive charge builds up on the sample it repels the ions and defocuses the beam."

Traditionally two methods have been used to keep a nonmetallic sample from acquiring charge from a positive-ion beam, she says. "One method is to pass the beam through a gas cell, where it is partially neutralized before it reaches the sample by acquiring electrons from the gas. The other is to train a separate beam of electrons on the sample."

Both have significant disadvantages. A gas cell may require too much distance between the beam accelerator and the sample, which can interfere with beam focusing. And a separate electron beam requires a separate accelerator, which must be precisely aligned with the ion beam at all times. If the ion beam is scanning the sample, this can be difficult; if multiple ion beamlets are being directed at the sample simultaneously, it's virtually impossible.

"In fact our new beam system was inspired by one of our group's previous inventions, a multiple-ion-beam system that can steer hundreds of beamlets simultaneously," says Ji. "The device had no room for a neutralizing gas cell, and there was no way to use a separate electron beam to neutralize the sample."

A new way to neutralize ion beams:

The group came up with a novel solution: instead of a liquid-metal ion source, standard in many focused ion beam devices, the new system uses two chambers in which plasma is generated by radio-frequency electromagnetic fields, which separate gas molecules into their component electrons and positive ions. The two chambers are divided by an arrangement of electrodes that allows only high-energy electrons to exit the first chamber and at the same time keeps positive ions out.

In the second chamber an ion beam is formed and accelerated by a lower voltage, which does not impede the high-energy electron beam. Both beams combine in a single mixed beam and are extracted by the accelerator column. The self-neutralizing, mixed beam stays tight on its way to the target, because with electrons present there is little "space charge" -- the positive ions do not push one another apart -- nor does it charge the sample upon striking it.

The combined-beam system can accelerate numerous species of ions, including noble gases like argon, metals like manganese, and even molecular ions like carbon-60 "buckyballs," useful in biological studies because of their stability.

Applications of the combined electron-ion beam:

In proof-of-principle experiments, the researchers used perforated stencil masks as the forward electrode of the accelerator, causing the beam to transfer the stencil's distinct shapes to the sample.

The dimensions of the shapes could be altered dramatically by establishing an electrostatic field between the mask and the sample. The researchers used argon ions to sputter stainless steel foils with an arc shape, the same length but more than twice as narrow as the aperture in the mask. In another experiment with an oxygen-ion beam, they cut trenches into a graphite sample three times narrower than the mask aperture.

The same technique can be used with three-dimensional masks, for example a cylindrical mask that accelerates surrounding electron and ion plasma to carve out features in a cardiac stent. Ka-Ngo Leung points out the advantages: "There's no need for scanning, no need to rotate the target. Unlike the way cardiac stents are manufactured now -- one at a time, machined by a laser -- ion-beam imprinting would allow hundreds or thousands of stents to be produced with just one shot."

Other current industrial applications that could benefit from imprinting with electron/positive-ion beams include, says Leung, "sound suppressors for jet engines that require millions of holes, which could be produced in one shot. Or cutting the many trenches needed to increase surface area in hydrogen fuel-cell electrodes, which could also be done in one shot."

In these and many other industrial applications involving micromachining, most of which currently employ laser systems, combined electron/positive-ion beams offer an economical way to greatly increase efficiency and throughput.

"A combined electron and ion beam imprinter and its applications," by Qing Ji, Lili Ji, Ye Chen, and Ka-Ngo Leung, appears in the 8 November, 2004 issue of "Applied Physics Letters." Principal funding for the combined-beam project was provided by the Defense Advanced Research Projects Agency's Advanced Lithography Program.
-end-
Berkeley Lab is a U.S. Department of Energy national laboratory located in Berkeley, California. It conducts unclassified scientific research and is managed by the University of California. Visit our website at http://www.lbl.gov.

DOE/Lawrence Berkeley National Laboratory

Related Electrons Articles from Brightsurf:

One-way street for electrons
An international team of physicists, led by researchers of the Universities of Oldenburg and Bremen, Germany, has recorded an ultrafast film of the directed energy transport between neighbouring molecules in a nanomaterial.

Mystery solved: a 'New Kind of Electrons'
Why do certain materials emit electrons with a very specific energy?

Sticky electrons: When repulsion turns into attraction
Scientists in Vienna explain what happens at a strange 'border line' in materials science: Under certain conditions, materials change from well-known behaviour to different, partly unexplained phenomena.

Self-imaging of a molecule by its own electrons
Researchers at the Max Born Institute (MBI) have shown that high-resolution movies of molecular dynamics can be recorded using electrons ejected from the molecule by an intense laser field.

Electrons in the fast lane
Microscopic structures could further improve perovskite solar cells

Laser takes pictures of electrons in crystals
Microscopes of visible light allow to see tiny objects as living cells and their interior.

Plasma electrons can be used to produce metallic films
Computers, mobile phones and all other electronic devices contain thousands of transistors, linked together by thin films of metal.

Flatter graphene, faster electrons
Scientists from the Swiss Nanoscience Institute and the Department of Physics at the University of Basel developed a technique to flatten corrugations in graphene layers.

Researchers develop one-way street for electrons
The work has shown that these electron ratchets create geometric diodes that operate at room temperature and may unlock unprecedented abilities in the illusive terahertz regime.

Photons and electrons one on one
The dynamics of electrons changes ever so slightly on each interaction with a photon.

Read More: Electrons News and Electrons Current Events
Brightsurf.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com.