Measuring nano-vibrations

November 05, 2014

In a recent paper published in Nature Nanotechnology, Joel Moser and ICFO colleagues of the NanoOptoMechanics research group led by Prof. Adrian Bachtold, together with Marc Dykman (Michigan University), report on an experiment in which a carbon nanotube mechanical resonator exhibits quality factors of up to 5 million, 30 times better than the best quality factors measured in nanotubes to date.

Imagine that the host of a dinner party tries to get his guests' attention by giving a single tap of his oyster spoon on his crystal glass. Now, imagine, to the amazement of all, that the crystal glass vibrates for several long minutes, producing a clear ringing sound. Surely the guests would marvel at this almost never ending crystal tone. Some might even want to investigate the origin of this phenomenon rather than listen to the host's speech.

The secret of such an imaginary non-stop vibrating system relies on the fact that it dissipates very little energy. The energy dissipation of a vibrating system is quantified by the quality factor. In laboratories, by knowing the quality factor, scientists can quantify how long the system can vibrate and how much energy is lost in the process. This allows them to determine how precise the resonator can be at measuring or sensing objects.

Scientists use mechanical resonators to study all sorts of physical phenomena. Nowadays, carbon nanotube mechanical resonators are in demand because of their extremely small size and their outstanding capability of sensing objects at the nanoscale. Though they are very good mass and force sensors, their quality factors have been somewhat modest. However, the discovery made by the ICFO researchers is a major advancement in the field of nano mechanics and an exciting starting point for future innovative technologies.

What is a Mechanical Resonator?

A mechanical resonator is a system that vibrates at very precise frequencies. Like a guitar string or a tightrope, a carbon nanotube resonator consists of a tiny, vibrating bridge-like (string) structure with typical dimensions of 1m in length and 1nm in diameter. If the quality factor of the resonator is high, the string will vibrate at a very precise frequency, thus enabling these systems to become appealing mass and force sensors, and exciting quantum systems.

Why is This Discovery so Important?

For many years, researchers observed that quality factors decreased with the volume of the resonator, that is the smaller the resonator the lower the quality factor, and because of this trend it was unthinkable that nanotubes could exhibit giant quality factors.

The giant quality factors that ICFO researchers have measured have not been observed before in nanotube resonators mainly because their vibrational states are extremely fragile and easily perturbed when measured. The values detected by the team of scientists was achieved through the use of an ultra-clean nanotube at cryostat temperatures of 30mK (-273.12 Celsius- colder than the temperature of outerspace!) and by employing an ultra-low noise method to detect minuscule vibrations quickly while reducing as much as possible the electrostatic noise.

Joel Moser claims that finding these quality factors has been challenging since "nanotube resonators are enormously sensitive to surrounding electrical charges that fluctuate constantly. This stormy environment strongly affects our ability to capture the intrinsic behavior of nanotube resonators. For this reason, we had to take a very large number of snapshots of the nanotube's mechanical behavior. Only a few of these snapshots captured the intrinsic nature of the nanotube's dynamics, when the storm momentarily relented. During these short, quiet moments, the nanotube revealed its ultra-high quality factor to us".

With the discovery of such high quality factors from this study, ICFO scientists have opened a whole new realm of possibilities for sensing applications, and quantum experiments. For instance, nanotube resonators might be used to detect individual nuclear spins, which would be an important step towards magnetic resonance imaging (MRI) with a spatial resolution at the atomic level. For the moment, Adrian Bachtold comments that "achieving MRI at the atomic level would be fantastic. But, for this, we would first have to solve various technological problems that are extremely challenging."
Reference: J. Moser, A. Eichler, J. Güttinger, M. I. Dykman, A. Bachtold, Nanotube mechanical resonators with quality factors of up to 5 million, Nature Nanotechnology, 2014, doi:10.1038/nnano.2014.234


Link to research group led by Prof. Adrian Bachtold:

Research at ICFO - NanoOptoMechanics research group led by Prof. Adrian Bachtold:

About ICFO

ICFO-The Institute of Photonic Sciences was created in 2002 by the government of Catalonia and the Technical University of Catalonia as a center of research excellence devoted to the science and technologies of light with a triple mission: to conduct frontier research, train the next generation of scientists, and provide knowledge and technology transfer. Today, it is one of the top research centres worldwide in its category as measured by the Mapping Scientific Excellence ranking.

Research at ICFO targets the forefront of science and technology based on light with programs directed at applications in Health, Renewable Energies, Information Technologies, Security and Industrial processes, among others. The institute hosts 300 professionals based in a dedicated building situated in the Mediterranean Technology Park in the metropolitan area of Barcelona.

Researchers at ICFO publish in the most prestigious journals and collaborate with a wide range of companies around the world. The institute runs a vigorous technology transfer program in which more than 30 national and international industries participate. It has also created 5 spin-off companies to date. The institute is generously supported by Cellex Foundation Barcelona, which supports several frontier research projects and programs focused on young talented researchers.

ICFO-The Institute of Photonic Sciences

Related Nanotubes Articles from Brightsurf:

Nanotubes in the eye that help us see
A new mechanism of blood redistribution that is essential for the proper functioning of the adult retina has just been discovered in vivo by researchers at the University of Montreal Hospital Research Centre (CRCHUM).

How plantains and carbon nanotubes can improve cars
Researchers from the University of Johannesburg have shown that plantain, a starchy type of banana, is a promising renewable source for an emerging type of lighter, rust-free composite materials for the automotive industry.

Exotic nanotubes move in less-mysterious ways
Rice University researchers capture the first video of boron nitride nanotubes in motion to prove their potential for materials and medical applications.

Groovy key to nanotubes in 2D
New research offers a groovy answer to the question of what causes carbon nanotubes to align in ultrathin crystalline films discovered at Rice.

Growing carbon nanotubes with the right twist
Researchers synthetize nanotubes with a specific structure expanding previous theories on carbon nanotube growth.

Clean carbon nanotubes with superb properties
Scientists at Aalto University, Finland, and Nagoya University, Japan, have found a new way to make ultra-clean carbon nanotube transistors with superior semiconducting properties.

Watching energy transport through biomimetic nanotubes
Scientists from the University of Groningen (the Netherlands) and the University of W├╝rzburg (Germany) have investigated a simple biomimetic light-harvesting system using advanced spectroscopy combined with a microfluidic platform.

Neural networks will help manufacture carbon nanotubes
A team of scientists from Skoltech's Laboratory of Nanomaterials proposed a neural-network-based method for monitoring the growth of carbon nanotubes, preparing the ground for a new generation of sophisticated electronic devices.

Photovoltaic nanotubes
Physicists discovered a novel kind of nanotube that generates current in the presence of light.

Chemical synthesis of nanotubes
For the first time, researchers used benzene -- a common hydrocarbon -- to create a novel kind of molecular nanotube, which could lead to new nanocarbon-based semiconductor applications.

Read More: Nanotubes News and Nanotubes Current Events is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to