UB Team's Perfectly Aligned Carbon Nanotubes Will Make Flat Panel Displays Feasible And Affordable

November 05, 1998

BUFFALO, N.Y. -- The pictures that accompany a University at Buffalo paper in this week's issue of Science show what looks like an exquisitely uniform field of wheat, or a close-up of a neatly trimmed "buzz cut."

In fact, the perfectly even rows of tall, skinny, carbon nanotubes represent a major advance that brings researchers much closer to developing the flat panel displays that one day will make it possible to hang your TV or computer monitor on the wall like a picture.

Flat panel products currently on the market, such as laptop computers, are based on technologies that cannot produce the excellent viewing angles and high resolution that carbon nanotubes will make possible.

The technical advances made by the UB team are precisely those that will help make flat panel displays made with carbon nanotubes affordable.

"We have made three major achievements," said Zhifang Ren, Ph.D., UB research associate professor of physics and chemistry, and first author. "Our nanotubes are beautifully aligned, they grow at relatively low temperatures and they are grown on glass."

Glass is the preferred material for monitors, costing only a few dollars as compared to several hundred dollars for silicon-based materials, which would make the cost of flat panel display products prohibitive.

Carbon nanotubes are actually tiny, elongated, tubular versions of C60, the soccer ball-shaped molecule also known as the "buckyball."

What makes them so tantalizing is their incredible strength, at least 100-1,000 times stronger than the strongest steel available, Ren explained, along with their very-high stability and excellent electron-emission capabilities. The combination makes them ideal for use in flat panel displays.

"In a conventional television, a high-voltage electron gun is constantly in motion, bombarding each pixel on the screen, and that's what gives you your picture," Ren explained. "But in order to have enough room for the gun to scan the whole length and breadth of the screen, you need about a foot." That gives televisions and computer monitors their unwieldy bulk. Flat panel displays, on the other hand, need less than a millimeter of space between the carbon nanotubes, which act as the electron emitters, and the phosphor screen.

"With these displays, because each pixel is an electron source, there is no need for scanning and therefore no need for that distance between the electron source and the screen."

But technical problems have prevented flat panel displays from advancing to the development stage.

"We know from earlier work on carbon nanotubes that electrons come out only from the tip of each tube, not from the sides," said Ren. "Therefore, it is necessary to have all the nanotubes positioned exactly perpendicular to the substrate on which they are grown. If the alignment is not good, then you cannot obtain good electron-emission properties."

Previously published work on carbon nanotubes has shown poor alignment, with nanotubes, in some cases, resembling jumbled strands of spaghetti. Previous work also involved growing carbon nanotubes on materials other than glass, which was necessary because of the high temperatures required for the synthesis of the nanotubes.

To use glass as the substrate, synthesis temperatures have to be below 650 degrees Centigrade, the point at which glass begins to deform.

"Our work shows that large arrays of well-aligned carbon nanotubes can be grown on anything, so long as the substrate can take temperatures of 650 C," explained Ren.

He believes that the reason the nanotubes produced by the UB researchers grew at such comparatively low temperatures is the use of ammonia, instead of nitrogen, during the synthesis.

"For the first time, we found ammonia acting as a catalyst," he said. "I think that this helps the disassociation of acetylene, which is necessary during the synthesis of the carbon nanotubes."

Carbon nanotubes have many other applications, from components in energy-storage devices to super-strong cables.

The UB researchers also are investigating the possibility of using nanotubes in scanning tunneling microscopes to enhance resolution.

The paper's co-authors are visiting scholar Zhongping Huang; Jui H. Wang, Ph.D., Einstein Professor of Science, and Jianwei Xu, doctoral candidate in the UB Department of Chemistry, all in the UB Materials Synthesis Laboratory, and Peter J. Bush, director of the UB Instrumentation Center. Other co-authors are Michael Siegal and Paula Provencio at Sandia National Laboratory, who provided transmission electron microscope characterization.
-end-


University at Buffalo

Related Carbon Nanotubes Articles from Brightsurf:

How plantains and carbon nanotubes can improve cars
Researchers from the University of Johannesburg have shown that plantain, a starchy type of banana, is a promising renewable source for an emerging type of lighter, rust-free composite materials for the automotive industry.

New production method for carbon nanotubes gets green light
A new method of producing carbon nanotubes -- tiny molecules with incredible physical properties used in touchscreen displays, 5G networks and flexible electronics -- has been given the green light by researchers, meaning work in this crucial field can continue.

Growing carbon nanotubes with the right twist
Researchers synthetize nanotubes with a specific structure expanding previous theories on carbon nanotube growth.

Research shows old newspapers can be used to grow carbon nanotubes
New research has found that old newspaper provide a cheap and green solution for the bulk production of single walled carbon nanotubes.

Clean carbon nanotubes with superb properties
Scientists at Aalto University, Finland, and Nagoya University, Japan, have found a new way to make ultra-clean carbon nanotube transistors with superior semiconducting properties.

Dietary fiber effectively purifies carbon nanotubes
A dietary fiber can help separate out semiconducting carbon nanotubes used for making transistors for flexible electronics.

Why modified carbon nanotubes can help the reproducibility problem
Scientists at Tokyo Institute of Technology (Tokyo Tech) conducted an in-depth study on how carbon nanotubes with oxygen-containing groups can be used to greatly enhance the performance of perovskite solar cells.

Tensile strength of carbon nanotubes depends on their chiral structures
Single-walled carbon nanotubes should theoretically be extremely strong, but it remains unclear why their experimental tensile strengths are lower and vary among nanotubes.

New study reveals carbon nanotubes measurement possible for the first time
Swansea University scientists report an entirely new approach to manipulation of carbon nanotubes that allows physical measurements to be made on carbon nanotubes that have previously only been possible by theoretical computation.

Neural networks will help manufacture carbon nanotubes
A team of scientists from Skoltech's Laboratory of Nanomaterials proposed a neural-network-based method for monitoring the growth of carbon nanotubes, preparing the ground for a new generation of sophisticated electronic devices.

Read More: Carbon Nanotubes News and Carbon Nanotubes Current Events
Brightsurf.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com.