A new way to mix oil and water

November 08, 2017

CAMBRIDGE, Mass. -- The reluctance of oil and water to mix together and stay that way is so well-known that it has become a cliché for describing any two things that do not go together well. Now, a new finding from researchers at MIT might turn that expression on its head, providing a way to get the two substances to mix and remain stable for long periods -- no shaking required. The process may find applications in pharmaceuticals, cosmetics, and processed foods, among other areas.

The new process involves cooling a bath of oil containing a small amount of a surfactant (a soap-like substance), and then letting water vapor from the surrounding air condense onto the oil surface. Experiments have shown that this can produce tiny, uniform water droplets on the surface that then sink into the oil, and their size can be controlled by adjusting the proportion of surfactant. The findings, by MIT graduate student Ingrid Guha, former postdoc Sushant Anand, and associate professor Kripa Varanasi, are reported in the journal Nature Communications.

As anyone who has ever used salad dressing knows, no matter how vigorously the mixture gets shaken, the oil and the vinegar (a water-based solution) will separate within minutes. But for many uses, including new drug-delivery systems and food-processing methods, it's important to be able to get oil in water (or water in oil) to form tiny droplets -- only a few hundred nanometers across, too small to see with the naked eye -- and to have them stay tiny rather than coalescing into larger droplets and eventually separating from the other liquid.

Typically, in industrial processes these emulsions are made by either mechanically shaking the mix or using sound waves to set up intense vibrations within the liquid, a process called sonicating. But both of these processes "require a lot of energy," Varanasi says, "and the finer the drops, the more energy it takes." By contrast, "our approach is very energy inexpensive," he adds.

"The key to overcoming that separation is to have really small, nanoscale droplets," Guha explains. "When the drops are small, gravity can't overcome them," and they can remain suspended indefinitely.

For the new process, the team set up a reservoir of oil with an added surfactant that can bind to both oil and water molecules. They placed this inside a chamber with very humid air and then cooled the oil. Like a glass of cold water on a hot summer day, the colder surface causes the water vapor to precipitate. The condensing water then forms droplets at the surface that spread through the oil-surfactant mixture, and the sizes of these droplets are quite uniform, the team found. "If you get the chemistry just right, you can get just the right dispersion," Guha says. By adjusting the proportion of surfactant in the oil, the droplet sizes can be well-controlled.

In the experiments, the team produced nanoscale emulsions that remained stable over periods of several months, compared to the few minutes that it takes for the same mixture of oil and water to separate without the added surfactant. "The droplets stay so small that they're hard to see even under a microscope," Guha says.

Unlike the shaking or sonicating methods, which take the large, separate masses of oil and water and gradually get them to break down into smaller drops -- a "top down" approach -- the condensation method starts off right away with the tiny droplets condensing out from the vapor, which the researchers call a bottom-up approach. "By cloaking the freshly condensed nanoscale water droplets with oil, we are taking advantage of the inherent nature of phase-change and spreading phenomena," Varanasi says.

"Our bottom-up approach of creating nanoscale emulsions is highly scalable owing to the simplicity of the process," Anand says. "We have uncovered many new phenomena during this work. We have found how the presence of surfactant can change the oil and water interactions under such conditions, promoting oil spreading on water droplets and stabilizing them at the nanoscale."

The team says that the approach should work with a variety of oils and surfactants, and now that the process has been identified, their findings "provide a kind of design guideline for someone to use" for a particular kind of application, Varanasi says.

"It's such an important thing," he says, because "foods and pharmaceuticals always have an expiration date," and often that has to do with the instability of the emulsions in them. The experiments used a particular surfactant that is widely used, but many other varieties are available, including some that are approved for food-grade products.

In addition, Guha says, "we envision that you could use multiple liquids and make much more complex emulsions." And besides being used in food, cosmetics, and drugs, the method could have other applications, such as in the oil and gas industry, where fluids such as the drilling "muds" sent down wells are also emulsions, Varanasi says.
-end-
The work was supported by the MIT Energy Initiative, the National Science Foundation, and a Society in Science fellowship. Anand, the co-author who was a postdoc at MIT, is now an assistant professor at the University of Illinois.

ADDITIONAL BACKGROUND

ARCHIVE: Stick, peel, or bounce: Controlling a freezing droplet's fate http://news.mit.edu/2017/stick-peel-bounce-controlling-freezing-droplets-0911

ARCHIVE: Researchers design coatings to prevent pipeline clogging http://news.mit.edu/2017/researchers-design-coatings-prevent-pipeline-blowouts-0414

ARCHIVE: Reducing runoff pollution by making spray droplets less bouncy http://news.mit.edu/2016/reducing-runoff-pollution-making-spray-droplets-less-bouncy-0830

Massachusetts Institute of Technology

Related Nanoscale Articles from Brightsurf:

Nanoscale machines convert light into work
Researchers have developed a tiny new machine that converts laser light into work.

Discovery will allow more sophisticated work at nanoscale
The movement of fluids through small capillaries and channels is crucial for processes ranging from blood flow through the brain to power generation and electronic cooling systems, but that movement often stops when the channel is smaller than 10 nanometers.

Valley-Hall nanoscale lasers
Topological photonics allows the creation of new states of light.

Dynamics of DNA replication revealed at the nanoscale
Using super-resolution technology a University of Technology Sydney led team has directly visualised the process of DNA replication in single human cells.

House cleaning on the nanoscale
A team of scientists at Friedrich-Alexander Universität Erlangen-Nürnberg (FAU) has developed a novel mechanical cleaning method for surfaces on the nanoscale.

As electronics shrink to nanoscale, will they still be good as gold?
As circuit interconnects shrink to nanoscale, will the pressure caused by thermal expansion when current flows through wires cause gold to behave more like a liquid than a solid -- making nanoelectronics unreliable?

A joint venture at the nanoscale
Scientists at Argonne National Laboratory report fabricating and testing a superconducting nanowire device applicable to high-speed photon counting.

Bending diamond at the nanoscale
A team of Australian scientists has discovered diamond can be bent and deformed, at the nanoscale at least.

Creating a nanoscale on-off switch for heat
Researchers create a polymer thermal regulator that can quickly transform from a conductor to an insulator, and back again.

Magnetic tuning at the nanoscale
Physicists from the German research center Helmholtz-Zentrum Dresden-Rossendorf (HZDR) are working to produce engineered magnetic nanostructures and to tailor material properties at the nanoscale.

Read More: Nanoscale News and Nanoscale Current Events
Brightsurf.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com.