Nav: Home

Skoltech scientists developed superfast charging high-capacity potassium batteries based on organic

November 11, 2019

Skoltech researchers in collaboration with scientists from the Institute for Problems of Chemical Physics of RAS and the Ural Federal University showed that high-capacity high-power batteries can be made from organic materials without using lithium or other rare elements. In addition, they demonstrated impressive stability of cathode materials and record high energy density in fast charge/discharge potassium-based batteries. The results of their studies were published in the Journal of Materials Chemistry A, Journal of Physical Chemistry Letters and Chemical Communications.

Lithium-ion batteries are indispensable in our daily life: they are widely used for energy storage, in particular, in portable electronics. The demand for batteries is surging due to the rapid advancement of electric vehicles that are attracting ever-increasing investment. For example, Volvo intends to increase the share of electric vehicles to 50% of its overall sales by 2025, and Daimler announced its plans to give up internal combustion engines altogether, shifting the emphasis towards electric vehicles.

However, mass use of lithium-ion batteries brings to the foreground the acute shortage of resources needed for their production. Transition metals commonly used in cathodes, such as cobalt, nickel and manganese, are fairly rare and expensive, and toxic too. While the bigger part of the less common lithium is produced by a handful of countries, the global supply of lithium is too meager for all conventional automobiles to be replaced with electric vehicles powered by lithium batteries. As estimated by the German Research Center for Energy Economics (FFE), the scarcity of lithium reserves may become a major issue in the coming decades. Recently, scientists have suggested looking at other alternatives, such as sodium and potassium, which are similar to lithium in chemical properties.

Skoltech researchers led by Professor Pavel Troshin have made significant advances in the development of sodium and potassium batteries based on organic cathode materials. Their research findings were reported in three publications in top international scientific journals.

Their first paper presents a polymer that contains hexaazatriphenylene fragments. The new material proved to be equally suitable for lithium, sodium and potassium batteries which charge in 30 to 60 seconds, while retaining their energy storage capacity after thousands of charge-discharge cycles. "Versatility is one of the key advantages of organic materials," explains the first author of the paper and Skoltech PhD student, Roman Kapaev. "Their redox mechanisms are much less specific to the nature of the counter-ion, which makes it easier to find an alternative to lithium-ion batteries.

With the lithium prices going up, it makes sense to replace it with the cheaper sodium or potassium that will never run out. As for inorganic materials, things are a lot more complicated."

The downside is that the hexaazatriphenylene-based polymer cathode has a low operating potential (about 1.6 V volts with respect to K+/K potential), which results in decreased energy storage capacity. In their second paper, the scientists proposed another material, a dihydrophenazine-based polymer, which does not have this drawback and ensures an increase in the battery's average operating voltage up to 3.6 volts. "Aromatic polymer amines can make excellent high-voltage organic cathodes for metal-ion batteries. In our study, we used poly-N-phenyl-5,10-dihydrophenazine in the potassium battery cathode for the first time. By thoroughly optimizing the electrolyte, we obtained specific energy of 593 W?h/kg, a record-high value for all the currently known K-ion battery cathodes," explains the first author of the study and Skoltech PhD student, Philipp Obrezkov.

A major issue in metal-ion batteries, especially those with a metal anode, is metal dendrites which grow into the cell causing short circuit, often accompanied by fire and even explosion. To avoid this, one can replace pure alkali metals with their alloys which are liquid at the battery operating temperature. This was recently proposed by Professor John B. Goodenough, a Nobel Prize winner 2019.

The low-melting potassium and sodium alloy (NaK) is known to contain about 22% of sodium by weight and has a melting point of -12.7 oC.

In their third study, the scientists used a similar potassium-sodium alloy applied on carbon paper as an anode and the redox-active polymers obtained earlier as cathodes. It transpired that such batteries can be charged-discharged in less than 10 seconds. Interestingly, one of the polymer cathodes exhibited the highest energy capacity for potassium batteries, while the other showed excellent stability, with only 11% of capacity lost after 10,000 charge/discharge cycles. Also, the batteries based on these two materials displayed unrivalled power characteristics of nearly 100,000 W/kg ? a level typical for supercapacitors.

"Currently, metal-ion batteries and supercapacitors are the most common energy storage solutions," comments the team leader, Pavel Troshin. "The former store a lot of energy per unit mass, but charge slowly and lose capacity rather quickly after a number of cycles, whereas the latter charge fast and withstand tens of thousands of cycles, but have poor storage capacity. We showed that electroactive organic materials can pave the way for a new generation of electrochemical energy storage devices combining the advantages of metal-ion batteries and supercapacitors, thus eliminating the need for costly transition metal compounds and lithium."

Skolkovo Institute of Science and Technology (Skoltech)

Related Energy Storage Articles:

New material, modeling methods promise advances in energy storage
The explosion of mobile electronic devices, electric vehicles, drones and other technologies have driven demand for new lightweight materials that can provide the power to operate them.
Finding balance between green energy storage, harvesting
Generating power through wind or solar energy is dependent on the abundance of the right weather conditions, making finding the optimal strategy for storage crucial to the future of sustainable energy usage.
Diamonds shine in energy storage solution
QUT researchers have proposed the design of a new carbon nanostructure made from diamond nanothreads that could one day be used for mechanical energy storage, wearable technologies, and biomedical applications.
Gas storage method could help next-generation clean energy vehicles
A Northwestern University research team has designed and synthesized new materials with ultrahigh porosity and surface area for the storage of hydrogen and methane for fuel cell-powered vehicles.
An all-organic proton battery energized for sustainable energy storage
Sustainable energy storage is in great demand. Researchers at Uppsala University have therefore developed an all-organic proton battery that can be charged in a matter of seconds.
Could water solve the renewable energy storage challenge?
Seasonally pumped hydropower storage could provide an affordable way to store renewable energy over the long-term, filling a much needed gap to support the transition to renewable energy, according to a new study from IIASA scientists.
A shift in shape boosts energy storage
More efficient photocatalysts could unlock the potential of solar energy.
Diamonds in your devices: Powering the next generation of energy storage
Supercapacitors, which have begun to stand in for conventional batteries, such as Li-ion batteries, can currently store much less energy than is ideal.
New membrane technology to boost water purification and energy storage
Imperial College London scientists have created a new type of membrane that could improve water purification and battery energy storage efforts.
Using mountains for long-term energy storage
The storage of energy for long periods of time is subject to special challenges.
More Energy Storage News and Energy Storage Current Events

Trending Science News

Current Coronavirus (COVID-19) News

Top Science Podcasts

We have hand picked the top science podcasts of 2020.
Now Playing: TED Radio Hour

Listen Again: Meditations on Loneliness
Original broadcast date: April 24, 2020. We're a social species now living in isolation. But loneliness was a problem well before this era of social distancing. This hour, TED speakers explore how we can live and make peace with loneliness. Guests on the show include author and illustrator Jonny Sun, psychologist Susan Pinker, architect Grace Kim, and writer Suleika Jaouad.
Now Playing: Science for the People

#565 The Great Wide Indoors
We're all spending a bit more time indoors this summer than we probably figured. But did you ever stop to think about why the places we live and work as designed the way they are? And how they could be designed better? We're talking with Emily Anthes about her new book "The Great Indoors: The Surprising Science of how Buildings Shape our Behavior, Health and Happiness".
Now Playing: Radiolab

The Third. A TED Talk.
Jad gives a TED talk about his life as a journalist and how Radiolab has evolved over the years. Here's how TED described it:How do you end a story? Host of Radiolab Jad Abumrad tells how his search for an answer led him home to the mountains of Tennessee, where he met an unexpected teacher: Dolly Parton.Jad Nicholas Abumrad is a Lebanese-American radio host, composer and producer. He is the founder of the syndicated public radio program Radiolab, which is broadcast on over 600 radio stations nationwide and is downloaded more than 120 million times a year as a podcast. He also created More Perfect, a podcast that tells the stories behind the Supreme Court's most famous decisions. And most recently, Dolly Parton's America, a nine-episode podcast exploring the life and times of the iconic country music star. Abumrad has received three Peabody Awards and was named a MacArthur Fellow in 2011.