Nav: Home

Fuel cell x-ray study details effects of temperature and moisture on performance

November 13, 2017

Like a well-tended greenhouse garden, a specialized type of hydrogen fuel cell - which shows promise as a clean, renewable next-generation power source for vehicles and other uses - requires precise temperature and moisture controls to be at its best. If the internal conditions are too dry or too wet, the fuel cell won't function well.

But seeing inside a working fuel cell at the tiny scales relevant to a fuel cell's chemistry and physics is challenging, so scientists used X-ray-based imaging techniques at the Department of Energy's Lawrence Berkeley National Laboratory (Berkeley Lab) and Argonne National Laboratory to study the inner workings of fuel-cell components subjected to a range of temperature and moisture conditions.

The research team, led by Iryna Zenyuk, a former Berkeley Lab postdoctoral researcher now at Tufts University, included scientists from Berkeley Lab's Energy Storage and Distributed Resources Division and the Advanced Light Source (ALS), an X-ray source known as a synchrotron.

The ALS lets researchers image in 3-D at high resolution very quickly, allowing them to look inside working fuel cells in real-world conditions. The team created a test bed to mimic the temperature conditions of a working polymer-electrolyte fuel cell that is fed hydrogen and oxygen gases and produces water as a byproduct.

"The water management and temperature are critical," said Adam Weber, a staff scientist in the Energy Technologies Area at Berkeley Lab and deputy director for a multi-lab fuel cell research effort, the Fuel Cell Consortium for Performance and Durability (FC-PAD).

The study has been published online in the journal Electrochimica Acta.

The research aims to find the right balance of humidity and temperature within the cell, and how water moves out of the cell.

Controlling how and where water vapor condenses in a cell, for example, is critical so that it doesn't block incoming gases that facilitate chemical reactions.

"Water, if you don't remove it, can cover the catalyst and prevent oxygen from reaching the reaction sites," Weber said. But there has to be some humidity to ensure that the central membrane in the cell can efficiently conduct ions.

The research team used an X-ray technique known as micro X-ray computed tomography to record 3-D images of a sample fuel cell measuring about 3 to 4 millimeters in diameter.

"The ALS lets us image in 3-D at high resolution very quickly, allowing us to look inside working fuel cells in real-world conditions," said Dula Parkinson, a research scientist at the ALS who participated in the study.

The sample cell included thin carbon-fiber layers, known as gas-diffusion layers, which in a working cell sandwich a central polymer-based membrane coated with catalyst layers on both sides. These gas-diffusion layers help to distribute the reactant chemicals and then remove the products from the reactions.

Weber said that the study used materials that are relevant to commercial fuel cells. Some previous studies have explored how water wicks through and is shed from fuel-cell materials, and the new study added precise temperature controls and measurements to provide new insight on how water and temperature interact in these materials.

Complimentary experiments at the ALS and at Argonne's Advanced Photon Source, a synchrotron that specializes in a different range of X-ray energies, provided detailed views of the water evaporation, condensation, and distribution in the cell during temperature changes.

"It took the ALS to explore the physics of this," Weber said, "so we can compare this to theoretical models and eventually optimize the water management process and thus the cell performance," Weber said.

The experiments focused on average temperatures ranging from about 95 to 122 degrees Fahrenheit, with temperature variations of 60 to 80 degrees (hotter to colder) within the cell. Measurements were taken over the course of about four hours. The results provided key information to validate water and heat models that detail fuel-cell function.

This test cell included a hot side designed to show how water evaporates at the site of the chemical reactions, and a cooler side to show how water vapor condenses and drives the bulk of the water movement in the cell.

While the thermal conductivity of the carbon-fiber layers - their ability to transfer heat energy - decreased slightly as the moisture content declined, the study found that even the slightest degree of saturation produced nearly double the thermal conductivity of a completely dry carbon-fiber layer. Water evaporation within the cell appears to dramatically increase at about 120 degrees Fahrenheit, researchers found.

The experiments showed water distribution with millionths-of-a-meter precision, and suggested that water transport is largely driven by two processes: the operation of the fuel cell and the purging of water from the cell.

The study found that larger water clusters evaporate more rapidly than smaller clusters. The study also found that the shape of water clusters in the fuel cell tend to resemble flattened spheres, while voids imaged in the carbon-fiber layers tend to be somewhat football-shaped.

There are also some ongoing studies, Weber said, to use the X-ray-based imaging technique to look inside a full subscale fuel cell one section at a time.

"There are ways to stitch together the imaging so that you get a much larger field of view," he said. This process is being evaluated as a way to find the origin of failure sites in cells through imaging before and after testing. A typical working subscale fuel cell measures around 50 square centimeters, he added.
-end-
Other researchers participating in this study were from Tufts University, Argonne National Laboratory, and the Norwegian University of Science and Technology. The work was supported by the U.S. Department of Energy's Fuel Cell Technologies Office and Office of Energy Efficiency and Renewable Energy, and the National Science Foundation.

The Advanced Light Source and the Advanced Photon Source are DOE Office of Science User Facilities that are open to visiting scientists from around the U.S. and world.

Lawrence Berkeley National Laboratory addresses the world's most urgent scientific challenges by advancing sustainable energy, protecting human health, creating new materials, and revealing the origin and fate of the universe. Founded in 1931, Berkeley Lab's scientific expertise has been recognized with 13 Nobel Prizes. The University of California manages Berkeley Lab for the U.S. Department of Energy's Office of Science. For more, visit http://www.lbl.gov.

DOE's Office of Science is the single largest supporter of basic research in the physical sciences in the United States, and is working to address some of the most pressing challenges of our time. For more information, please visit science.energy.gov.

DOE/Lawrence Berkeley National Laboratory

Related Fuel Cell Articles:

How protons move through a fuel cell
Hydrogen is regarded as the energy source of the future: It is produced with solar power and can be used to generate heat and electricity in fuel cells.
Microbial fuel cell converts methane to electricity
Transporting methane from gas wellheads to market provides multiple opportunities for this greenhouse gas to leak into the atmosphere.
Stabilizing molecule could pave way for lithium-air fuel cell
Lithium-oxygen fuel cells boast energy density levels comparable to fossil fuels and are thus seen as a promising candidate for future transportation-related energy needs.
How does oxygen get into a fuel cell?
In order for a fuel cell to work, it needs an oxidizing agent.
Petrol and jet fuel alternatives are produced by yeast cell factories
There have been many attempts to modify this stubborn little enzyme, but none have succeeded.
Building a better microbial fuel cell -- using paper
Researchers have made significant progress in developing microbial fuel cells, which rely on bacteria to generate an electrical current, that are cheaper and more efficient.
It's basic: Alternative fuel cell technology reduces cost
The best road to zero-emission vehicles lies in fuel-cell technology, according to the University of Delaware's Yushan Yan.
Fuel cell membrane patented by Sandia outperforms market
Industrial interest is expected in a vehicular fuel cell membrane able to excrete protons at the most effective temperature ranges, allowing electrons to form an unimpeded electric current.
Researchers reduce expensive noble metals for fuel cell reactions
Washington State University researchers have developed a novel nanomaterial that could improve the performance and lower the costs of fuel cells by using fewer precious metals like platinum or palladium.
3-D paper-based microbial fuel cell operating under continuous flow condition
A team of researchers from the Iowa State University in Ames, IA has demonstrated a proof-of-concept three-dimensional paper-based microbial fuel cell (MFC) that could take advantage of capillary action to guide the liquids through the MFC system and to eliminate the need for external power.

Related Fuel Cell Reading:

Fuel Cell Fundamentals
by Ryan O'Hayre (Author), Suk-Won Cha (Author), Whitney Colella (Author), Fritz B. Prinz (Author)

A complete, up-to-date, introductory guide to fuel cell technology and application

Fuel Cell Fundamentals provides a thorough introduction to the principles and practicalities behind fuel cell technology. Beginning with the underlying concepts, the discussion explores fuel cell thermodynamics, kinetics, transport, and modeling before moving into the application side with guidance on system types and design, performance, costs, and environmental impact. This new third edition has been updated with the latest technological advances and relevant calculations, and enhanced... View Details


Build Your Own Fuel Cells
by Phillip Hurley (Author)

The technology of the future is here today - and now available to the non-engineer! Build Your Own Fuel Cells contains complete, easy to understand illustrated instructions for building several types of proton exchange membrane (PEM) fuel cells - and, templates for 6 PEM fuel cell types, including convection fuel cells and oxygen-hydrogen fuel cells, in both single slice and stacks.

Low tech/high quality

Two different low-tech fuel cell construction methods are covered: one requires a bandsaw and drill press, and the other only a few hand tools. Anyone... View Details


Fuel cells (Vol-1): a survey
by Bernard J. Crowe (Author)

This book was digitized and reprinted from the collections of the University of California Libraries. It was produced from digital images created through the libraries’ mass digitization efforts. The digital images were cleaned and prepared for printing through automated processes. Despite the cleaning process, occasional flaws may still be present that were part of the original work itself, or introduced during digitization. This book and hundreds of thousands of others can be found online in the HathiTrust Digital Library at www.hathitrust.org. View Details


Build A Solar Hydrogen Fuel Cell System
by Phillip Hurley (Author)

Learn how to construct and operate the components of a solar hydrogen fuel cell system: the fuel cell stack, the electrolyzer to generate hydrogen fuel, simple hydrogen storage, and solar panels designed specifically to run electrolyzers for hydrogen production. Complete, clear, illustrated instructions to build all the major components make it easy for the non-engineer to understand and work with this important new technology.

Featured are the author's innovative and practical designs for efficient solar powered hydrogen production including:

ESPMs (Electrolyzer Specific... View Details


Fuel Cells: From Fundamentals to Applications
by Supramaniam Srinivasan (Author)

This concise sourcebook of the electrochemical, engineering and economic principles involved in the development and commercialization of fuel cells offers a thorough review of applications and techno-economic assessment of fuel cell technologies, plus in-depth discussion of conventional and novel approaches for generating energy. Parts I and II explain basic and applied electrochemistry relevant to an understanding of fuel cells. Part III covers engineering and technology aspects. The book is useful for undergraduate and graduate students and scientists interested in fuel cells. Unlike any... View Details


Fuel Cell Systems Explained (Second Edition)
by James Larminie (Author), Andrew Dicks (Author)

Building on the success of the first edition Fuel Cell Systems Explained presents a balanced introduction to this growing area.

"In summary, an altogether satisfying book that puts within its covers the academic tools necessary for explaining fuel cell systems on a multidisciplinary basis." Power Engineering Journal

"An excellent book….well written and produced." Journal of Power and Energy

Fully revised and updated, the second edition:

Provides an essential guide to the principles, design and application of fuel cell systems. Includes full and updated coverage... View Details


Hydrogen and Fuel Cells: Emerging Technologies and Applications (The Sustainable World Series)
by Bent Sørensen (Author)

The next several years will see a massive emergence of hydrogen fuel cells as an alterative energy option in both transportation and domestic use. The long-range expectation is that hydrogen will be used as a fuel, produced either from renewable energy, fossil, or nuclear sources, offering an environmentally acceptable and efficient source of power/energy.

Hydrogen and Fuel Cells describes in detail the techniques associated with all the production and conversion steps and the set-up of systems at a level suited for both academic and professional use. The book not only describes the... View Details


Designing and Building Fuel Cells
by Colleen Spiegel (Author)

Acquire an All-in-One Toolkit for Expertly Designing, Modeling, and Constructing High-Performance Fuel Cells

Designing and Building Fuel Cells equips you with a hands-on guide for the design, modeling, and construction of fuel cells that perform as well or better than some of the best fuel cells on the market today.

Filled with over 120 illustrations and schematics of fuel cells and components, this “one-stop” guide covers fuel cell applications…fuels and the hydrogen economy…fuel cell chemistry, thermodynamics, and electrochemistry…fuel cell modeling,... View Details


Fuel Cell Handbook (Seventh Edition)
by Eg&G Technical Services Inc. (Author), U.S. Department Of Energy (Contributor)

Fuel cells are one of the cleanest and most efficient technologies for generating electricity. Since there is no combustion, there are none of the pollutants commonly produced by boilers and furnaces. For systems designed to consume hydrogen directly, the only products are electricity, water and heat. Fuel cells are an important technology for a potentially wide variety of applications including on-site electric power for households and commercial buildings; supplemental or auxiliary power to support car, truck and aircraft systems; power for personal, mass and commercial transportation; and... View Details


Hybrid, Electric, and Fuel-Cell Vehicles (Go Green with Renewable Energy Resources)
by Jack Erjavec (Author)

HYBRID, ELECTRIC AND FUEL-CELL VEHICLES, Second Edition, covers the cutting-edge technology and technology that are revolutionizing today's automotive industry. Author Jack Erjavec combines in-depth industry expertise with an engaging, reader-friendly style, providing extensive detail on new and upcoming electric vehicles, including hybrids in production today and the fuel cell vehicles of tomorrow. Expansive coverage ranges from basic theory related to vehicle construction, electricity, batteries, and motors, to the political and social impact of these high-profile vehicles. In addition to... View Details

Best Science Podcasts 2017

We have hand picked the best science podcasts for 2017. Sit back and enjoy new science podcasts updated daily from your favorite science news services and scientists.
Now Playing: TED Radio Hour

Going Undercover
Are deception and secrecy categorically wrong? Or can they be a necessary means to an end? This hour, TED speakers share stories of going undercover to explore unknown territory, and find the truth. Guests include poet and activist Theo E.J. Wilson, journalist Jamie Bartlett, counter-terrorism expert Mubin Shaikh, and educator Shabana Basij-Rasikh.
Now Playing: Science for the People

#452 Face Recognition and Identity
This week we deep dive into the science of how we recognize faces and why some of us are better -- or worse -- at this than others. We talk with Brad Duchaine, Professor of Psychology at Dartmouth College, about both super recognizers and face blindness. And we speak with Matteo Martini, Psychology Lecturer at the University of East London, about a study looking at twins who have difficulty telling which one of them a photo was of. Charity Links: Union of Concerned Scientists Evidence For Democracy Sense About Science American Association for the Advancement of Science Association for Women...