Greater oversight of precursor chemicals at retail level needed to reduce threat from IEDsNovember 14, 2017
WASHINGTON - Policymakers' efforts to reduce threats from improvised explosive devices (IEDs) should include greater oversight of precursor chemicals sold at the retail level - especially over the Internet - that terrorists, violent extremists, or criminals use to make homemade explosives, says a new report from the National Academies of Sciences, Engineering, and Medicine. While retail sales of these precursor chemicals present a substantial vulnerability, they have not been a major focus of federal regulations so far.
"The bombings of the Murrah Federal Building in Oklahoma City and the World Trade Center in New York City in the 1990s and those over the past few years in Paris, Brussels, and Manchester, in New York and New Jersey, and in many other communities around the world starkly demonstrate the long lived and persistent threat posed by IEDs," said Victoria Greenfield, chair of the committee that wrote the report, and a visiting scholar in the department of criminology, law and society at George Mason University. "The report stresses the importance of engaging in an ongoing deliberative process to reduce this threat."
The report, which was requested by the U.S. Department of Homeland Security, identifies, lists, and prioritizes precursor chemicals that can be used to make homemade explosives, using criteria on utility and use to separate them into Groups A, B, and C. The 10 chemicals in Group A constitute the greatest current threat and should be the highest priority for policymakers' attention, the report says.
Precursor chemicals enter the supply chain as imports or through manufacturing and make their way to industrial, agricultural, and other end users. Industry tracks the movement of chemicals through much of the supply chain, but visibility and oversight appear to diminish as chemicals approach the end of the line. Data suggest that a terrorist can acquire enough precursor chemicals to manufacture homemade explosives through legal purchases from retail outlets. While the Oklahoma and New York City bombings employed thousands of pounds of precursor chemicals, many contemporary incidents have involved much smaller quantities that are readily available to consumers.
Conscious of the need to address this vulnerability yet minimize the burden on legitimate commerce, the committee assessed four general types of control strategy, directed at a subset of retail sales to noncommercial end-users, that is, the general public. Each strategy could include different combinations of mandatory and voluntary policy mechanisms, but three would feature a new control--a ban, a licensing requirement, or a registry for non-commercial purchases--and one would augment existing controls with increases in related outreach, training, and reporting.
Of the four types of strategy, none emerged as the best choice during the committee's deliberations on security, economic, and other trade-offs, the report says, noting that the committee lacked the time, resources, and directive from DHS to do an in-depth analysis of these policy options and that such an endeavor would require greater specificity about the terms of proposed actions. The report calls on DHS to use the committee's assessment as a starting point for engaging in a more comprehensive, detailed, and rigorous analysis of specific provisions for mandatory and voluntary policy mechanisms.
In examining possible policy options, policymakers and private-sector entities should consider strategies that would address multiple chemicals, rather than just a single chemical, the report says. Historically, terrorists' have modified their tactics by using alternative chemicals in response to single-chemical controls. The federal government also should provide more support for voluntary measures and programs that can help restrict access. Regardless of the path chosen, the report calls for re-evaluating priorities among chemicals and re-visiting policy responses regularly, in light of changing threats.
In addition, federal, state, local, and private-sector entities should explore strategies for harmonizing oversight of the sale and use of commercially available exploding target kits that are designed to produce homemade explosives, the report says. Some states have implemented rules independently, but no federal agency has explicit authority from Congress to oversee the sale of these kits.
The committee also identified opportunities for future research, including work to identify chemicals that could replace precursor chemicals in commercial products and to better understand how terrorists might respond to possible controls.
Riya V. Anandwala, Media Relations Officer
Joshua Blatt, Media Relations Assistant
Office of News and Public Information
202-334-2138; e-mail firstname.lastname@example.org
Follow us on Twitter: @theNASEM
Follow us on Instagram: @theNASEM
Follow us on Facebook: @NationalAcademies
Copies of Reducing the Threat of Improvised Explosive Device Attacks by Restricting Access to Explosive Precursor Chemicals are available at http://www.nap.edu or by calling 202-334-3313 or 1-800-624-6242. Reporters may obtain a copy from the Office of News and Public Information (contacts listed above).
THE NATIONAL ACADEMIES OF SCIENCES, ENGINEERING, AND MEDICINE
Division on Earth and Life Studies
Board on Chemical Sciences and Technology
Committee on Reducing the Threat of Improvised Explosive Device Attacks by Restricting Access to Chemical Explosive Precursors
Victoria A. Greenfield (chair)
Department of Criminology, Law, and Society
George Mason University
Robert G. Best
Joint Improvised-Threat Defeat Organization
Defense Threat Reduction Agency
U.S. Department of Defense
Leo E. Bradley
Independent Consultant and Owner
LE Bradley Consulting LLC
John C. Brulia
Director of Safety and Compliance (retired)
Austin Powder Co.
Sagamore Hills, Ohio
Carrie L. Castille
Agriculture and Natural Resources Consultant
Breaux Bridge, La.
David G. Delaney
Center for Health and Homeland Security
University of Maryland
Arthur G. Fraas
Resources for the Future
Chevy Chase, Md.
William J. Hurley
Adjunct Research Staff Member
Joint Advanced Warfighting Division
Institute for Defense Analyses
Karmen N. Lappo
Sandia National Laboratories
Becky D. Olinger
Office of Counter Terrorism and Counter Proliferation
National Nuclear Security Administration
Los Alamos, N.M.
Jimmie C. Oxley
Professor of Chemistry and Co-Director
Forensic Science Partnership
University of Rhode Island
Kevin F. Smith
President and CEO
Sustainable Supply Chain Consulting
Senior Forensic Scientist
Federal Bureau of Investigation
National Academies of Sciences, Engineering, and Medicine
Related Engineering Articles:
E. coli may have potentially harmful effects but scientists in Australia have discovered this bacterium produces a toxin which binds to an unusual sugar that is part of carbohydrate structures present on cells not usually produced by healthy cells.
The Wyss Institute for Biologically Inspired Engineering and the University of Zurich announced today a cross-institutional team effort to generate a functional heart valve replacement with the capacity for repair, regeneration, and growth.
The Mackenzie Dike Swarm and the roughly 120 other known giant dike swarms located across the planet may also provide useful information about efficient extraction of oil and natural gas in today's modern world.
Academically strong, low-income would-be engineers get the boost they need to complete their undergraduate degrees.
Professor Ron Hui, Chair Professor of Power Electronics and Philip Wong Wilson Wong Professor of Electrical Engineering at the University of Hong Kong, has been named a Fellow by the Royal Academy of Engineering, UK, one of the most prestigious national academies.
The often-maligned E. coli bacteria has powerhouse potential: in the lab, it has the ability to crank out fuels, pharmaceuticals and other useful products at a rapid rate.
Raresh Pascali, instructional associate professor in the Mechanical Engineering Technology Program at the University of Houston, has been named the 2016 recipient of the Ross Kastor Educator Award.
A team at the Wyss Institute for Biologically Inspired Engineering at Harvard University and the Harvard John A.
University of Utah engineers have discovered a new kind of 2-D semiconducting material for electronics that opens the door for much speedier computers and smartphones that also consume a lot less power.
A University of Bristol academic has been elected a Fellow of the world's largest and most prestigious professional association for the advancement of technology.
Related Engineering Reading:
Engineering: An Illustrated History from Ancient Craft to Modern Technology (Ponderables 100 Achievements That Changed History Who Did What When)
by Tom Jackson (Editor) (Author), Tom Jackson (Editor)
From ancient aqueducts to soaring skyscrapers, explore engineering milestones over the centuries.
Combining engaging text with captivating images and helpful diagrams, renowned science writer Tom Jackson guides readers through the history of Engineering in the 7th installment of the groundbreaking PonderablesTM series.
Engineering is all around us. From our bridges, tunnels and skyscrapers, to our cars, computers and smartphones, engineering shapes our world and influences just about everything we see and do. And it s been that way for longer than you might think.... View Details
Basic Machines and How They Work
by Naval Education And Training Program (Author)
This revised edition of an extremely clear Navy training manual leaves nothing to be desired in its presentation. Thorough in its coverage of basic theory, from the lever and inclined plane to internal combustion engines and power trains, it requires nothing more than an understanding of the most elementary mathematics.
Beginning with the simplest of machines — the lever — the text proceeds to discussions of the block and tackle (pulleys and hoists), wheel and axle, the inclined plane and the wedge, the screw, and different types of gears (simple, spur, bevel, herringbone, spiral,... View Details
101 Things I Learned in Engineering School
by John Kuprenas (Author), Matthew Frederick (Collaborator)
In this unique primer, an experienced civil engineer and instructor presents the physics and fundamentals that underlie the many fields of engineering. Far from a dry, nuts-and-bolts exposition, however, 101 THINGS I LEARNED® IN ENGINEERING SCHOOL probes real-world examples to show how the engineer's way of thinking can-and sometimes cannot-inform our understanding of how things work. Questions from the simple to the profound are illuminated throughout: Why shouldn't soldiers march across a bridge? Why do buildings want to float and cars want to fly? What is the difference between thinking... View Details
Thermodynamics: An Engineering Approach
by Yunus A. Cengel Dr. (Author), Michael A. Boles (Author)
Thermodynamics, An Engineering Approach, eighth edition, covers the basic principles of thermodynamics while presenting a wealth of real-world engineering examples so students get a feel for how thermodynamics is applied in engineering practice. This text helps students develop an intuitive understanding by emphasizing the physics and physical arguments. Cengel and Boles explore the various facets of thermodynamics through careful explanations of concepts and use of numerous practical examples and figures, having students develop necessary skills to bridge the gap between knowledge and the... View Details
Studying Engineering: A Road Map to a Rewarding Career (Fourth Edition)
by Raymond B. Landis (Author)
About the Book
Since Studying Engineering: A Road Map to a Rewarding Career exploded onto the market in 1995, it has become the best selling Introduction to Engineering textbook of all time. Adopted by over 300 U.S. institutions, and reaching more than 150,000 students, the book has made major inroads into the "sink or swim" paradigm of engineering education. Armed with the book as a powerful tool for "student development," large numbers of engineering programs have implemented Introduction to Engineering courses to improve the academic performance and retention rates of their... View Details
Irresistible: The Rise of Addictive Technology and the Business of Keeping Us Hooked
by Adam Alter (Author)
“One of the most mesmerizing and important books I’ve read in quite some time. Alter brilliantly illuminates the new obsessions that are controlling our lives and offers the tools we need to rescue our businesses, our families, and our sanity.” —Adam Grant, New York Times bestselling author of Originals and Give and Take
Welcome to the age of behavioral addiction—an age in which half of the American population is addicted to at least one behavior. We obsess over our emails, Instagram likes, and Facebook feeds; we binge on TV episodes... View Details
The Book of Massively Epic Engineering Disasters: 33 Thrilling Experiments Based on History's Greatest Blunders (Irresponsible Science)
by Sean Connolly (Author)
It’s hands-on science with a capital “E”—for engineering.
Beginning with the toppling of the Colossus of Rhodes, one of the seven wonders of the ancient world, to the destructive, laserlike sunbeams bouncing off London’s infamous “Fryscraper” in 2013, here is an illustrated tour of the greatest engineering disasters in history, from the bestselling author of The Book of Totally Irresponsible Science.
Each engineering disaster includes a simple, exciting experiment or two using everyday household items to explain the underlying science and put... View Details
Basics of Mechanical Engineering
by R K Singal (Author), Mridul Singal (Author), Rishi Singal (Author)
Basics of Mechanical Engineering systematically develops the concepts and principles essential for understanding engineering thermodynamics, mechanics and strength of materials. This book is meant for first year B.Tech students of various technical universities. It will also be helpful for candidates preparing for various competitive examinations. In Basics of Mechanical Engineering Each chapter includes problems selected from university examination papers and question banks. Exhaustive question bank on theory problems at the end of each chapter. Includes all supplementary material required... View Details
Shigley's Mechanical Engineering Design (McGraw-Hill Series in Mechanical Engineering)
by Richard G Budynas (Author), Keith J Nisbett (Author)
Shigley's Mechanical Engineering Design is intended for students beginning the study of mechanical engineering design. Students will find that the text inherently directs them into familiarity with both the basics of design decisions and the standards of industrial components. It combines the straightforward focus on fundamentals that instructors have come to expect, with a modern emphasis on design and new applications. The tenth edition maintains the well-designed approach that has made this book the standard in machine design for nearly 50 years. View Details
Engineering: A Very Short Introduction
by David Blockley (Author)
Engineering is part of almost everything we do--from the buildings we live in and the roads and railways we travel on, to the telephones and computers we use to communicate and the X-ray machines that help doctors diagnose diseases. In this Very Short Introduction, David Blockley explores the nature and practice of engineering--its history, its scope, and its relationship with art, craft, science, and technology. He begins with its early roots, ranging from Archimedes to some of the great figures of engineering such as Brunel and Marconi, right up to the modern day, describing the... View Details