Solar cells: Mapping the landscape of Caesium based inorganic halide perovskites

November 16, 2020

Scientists at HZB have printed and explored different compositions of caesium based halide perovskites (CsPb(BrxI1−x)3 (0 ≤ x ≤ 1)). In a temperature range between room temperature and 300 Celsius, they observe structural phase transitions influencing the electronic properties. The study provides a quick and easy method to assess new compositions of perovskite materials in order to identify candidates for applications in thin film solar cells and optoelectronic devices.

Hybrid halide perovskites (ABX3) have risen up in only a few years as highly efficient new materials for thin film solar cells. The A stands for a cation, either an organic molecule or some alkali metal, the B is a metal, most often Lead (Pb) and the X is a halide element such as Bromide or Iodide. Currently some compositions achieve power conversion efficiencies above 25%. What is more, most perovskite thin films can easily be processed from solution at moderate processing temperatures, which is very economic.

World record efficiencies have been reached by organic molecules such as methylammonium (MA) as the A cation and Pb and Iodine or Bromide on the other sites. But those organic perovskites are not yet very stable. Inorganic perovskites with Caesium at the A-site promise higher stabilities, but simple compounds such as CsPbI3 or CsPbBr3 are either not very stable or do not provide the electronic properties needed for applications in solar cells or other optoelectronic devices.

Now, a team at HZB did explore compositions of CsPb(BrxI1?x)3, which provide tunable optical band gaps between 1.73 and 2.37 eV. This makes these mixtures really interesting for multi-junction solar cell applications, in particular for tandem devices.

For the production they used a newly developed method for printing combinatorial perovskite thin films to produce systematic variations of (CsPb(BrxI1?x)3 thin films onto a substrate. To achieve this, two print heads were filled with either CsPbBr2I or CsPbI3 and then programmed to print the required amount of liquid droplets onto the substrate to form a thin film of the wanted composition. After annealing at 100 Celsius to drive out the solvent and crystallise the sample, they obtained thin stripes with different compositions (shown in the picture).

With a special high intensity x-ray source, the liquid metal jet in the LIMAX lab at HZB, the crystalline structure of the thin film was analysed at different temperatures, ranging from room temperature up to 300 Celsius. "We find that all investigated compositions convert to a cubic perovskite phase at high temperature", Hampus Näsström, PhD student and first author of the publication explains. Upon cooling down, all samples transition to metastable tetragonal and orthorhombic distorted perovskite phases, which make them suitable for solar cell devices. "This has proven to be an ideal use case of in-situ XRD with the lab-based high-brilliance X-ray source", Roland Mainz, head of the LIMAX laboratory, adds.

Since the transition temperatures into the desired phases are found to decrease with increasing bromide content, this would allow to lower processing temperatures for inorganic perovskite solar cells.

"The interest in this new class of solar materials is huge, and the possible compositional variations near to infinite. This work demonstrates how to produce and assess systematically a wide range of compositions", says Dr. Eva Unger, who heads the Young Investigator Group Hybrid Materials Formation and Scaling. Dr. Thomas Unold, head of the Combinatorial Energy Materials Research group agrees and suggests that "this is a prime example of how high-throughput approaches in research could vastly accelerate discovery and optimization of materials in future research".
-end-


Helmholtz-Zentrum Berlin für Materialien und Energie

Related Solar Cells Articles from Brightsurf:

Solar cells of the future
Organic solar cells are cheaper to produce and more flexible than their counterparts made of crystalline silicon, but do not offer the same level of efficiency or stability.

A blast of gas for better solar cells
Treating silicon with carbon dioxide gas in plasma processing brings simplicity and control to a key step for making solar cells.

Record efficiency for printed solar cells
A new study reports the highest efficiency ever recorded for full roll-to-roll printed perovskite solar cells.

Next gen solar cells perform better when there's a camera around
A literal ''trick of the light'' can detect imperfections in next-gen solar cells, boosting their efficiency to match that of existing silicon-based versions, researchers have found.

On the trail of organic solar cells' efficiency
Scientists at TU Dresden and Hasselt University in Belgium investigated the physical causes that limit the efficiency of novel solar cells based on organic molecular materials.

Exciting tweaks for organic solar cells
A molecular tweak has improved organic solar cell performance, bringing us closer to cheaper, efficient, and more easily manufactured photovoltaics.

For cheaper solar cells, thinner really is better
Researchers at MIT and at the National Renewable Energy Laboratory (NREL) have outlined a pathway to slashing costs further, this time by slimming down the silicon cells themselves.

Flexible thinking on silicon solar cells
Combining silicon with a highly elastic polymer backing produces solar cells that have record-breaking stretchability and high efficiency.

Perovskite solar cells get an upgrade
Rice University materials scientists find inorganic compounds quench defects in perovskite-based solar cells and expand their tolerance of light, humidity and heat.

Can solar technology kill cancer cells?
Michigan State University scientists have revealed a new way to detect and attack cancer cells using technology traditionally reserved for solar power.

Read More: Solar Cells News and Solar Cells Current Events
Brightsurf.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com.