ORNL Develops Procedure To Rate Thermal Performance Of Whole Walls

November 20, 1996

OAK RIDGE, Tenn., Nov. 20, 1996 -- What's the R-value in your walls? The answer used to be simply the R-value of your wall insulation. For standard wood frame construction, determining R-value, or resistance to heat flow, based solely on wall insulation was not too far off.

But because of the increasing use of metal frame systems and other more conductive materials, such as masonry and concrete, in our walls, R-value should now be determined by studying the whole wall, not just the insulation. How? By using a new wall testing and rating procedure developed at the Department of Energy's (DOE's) Oak Ridge National Laboratory (ORNL).

"We've created a procedure to help users measure the ability of whole walls to hold in heat in the winter and keep out heat in the summer," says Jeff Christian, program manager for Building Thermal Envelope Systems at ORNL's Buildings Technology Center (BTC), a DOE user facility at ORNL.

"At BTC, we test and rate whole walls for users. We can work with traditional wood-frame walls containing traditional materials, ranging from face brick to interior drywall. And we can test metal-frame walls and insulating concrete forms, which are gaining popularity in residential construction."

Previously, rating procedures produced a wall R-value based on measurements at the center of a wall cavity. For example, if a wall's insulation had an R-19 value, the whole wall was rated as R-19. However, this approach fails to take into account increased heat leakages at corners, doors, windows, and studs that offer lower resistance to heat flow than insulation materials. The ORNL approach accounts for these factors.

"Because of the complicated nature of energy flows in buildings, we note a particular need for accurate and comprehensive measures of building energy performance. Limited comparisons such as R-value differences can lead to considerable misrepresentation of benefit. As a result, energy performance measurement research may be the best use of shrinking federal research dollars. The national laboratories can provide the scientific basis necessary to 'level the playing field' without the bias of a particular technology, material, or strategy. ORNL's initiative on whole wall performance ratings is an excellent example of how federal research resources can benefit both industry and the general public," said John M. Talbott, program manager, DOE Office of Building Technology, State and Community Programs.

"Several state energy agencies," Christian says, are thinking about adopting the procedure. "We have already worked with seven firms and currently are working with another four. About 36 companies have expressed interest in becoming BTC users and adding their wall system to the electronic base available on the Internet's World Wide Web."

Users pay $3000 to $15,000 each for testing and detailed computer modeling of their systems. A whole wall's resistance to heat flow is measured using steady-state and dynamic testing in BTC's new Rotatable Guarded Hot Box. The test results are then entered into an ORNL-developed simulation model called HEATING, which predicts the thermal performance of the opaque wall (everything except the windows and doors).

Total wall R-value ratings allow builders and buyers to compare thermal resistances of dissimilar walls. This capability is especially important because of the growing use of alternative wall systems and construction materials such as steel, structural ceramics, left-in-place insulating foam forms and structural insulating panels (wood-foam-wood sandwiches).

"We put the wall performance information in a database on the World Wide Web," Christian says. "Home designers, builders, realtors, and buyers can use it to predict ratings for these wall systems customized for their own housing plans." The Web address is http://www.cad.ornl.gov/kch/demo.html

Funding for the research is provided by DOE, Office of Building Technology, State and Community Programs and the host of private firms developing alternative exterior wall systems for the future.

ORNL, one of the Department of Energy's multiprogram national research and development facilities, is managed by Lockheed Martin Energy Research.

If you would prefer to receive your press releases by e-mail, please send your e-mail address to culverjw@ornl.gov

You may read other press releases from Oak Ridge National Laboratory or learn more about the Lab if you have access to the Internet. You can find our information on the World Wide Web at

DOE/Oak Ridge National Laboratory

Related Technology Articles from Brightsurf:

December issue SLAS Technology features 'advances in technology to address COVID-19'
The December issue of SLAS Technology is a special collection featuring the cover article, ''Advances in Technology to Address COVID-19'' by editors Edward Kai-Hua Chow, Ph.D., (National University of Singapore), Pak Kin Wong, Ph.D., (The Pennsylvania State University, PA, USA) and Xianting Ding, Ph.D., (Shanghai Jiao Tong University, Shanghai, China).

October issue SLAS Technology now available
The October issue of SLAS Technology features the cover article, 'Role of Digital Microfl-uidics in Enabling Access to Laboratory Automation and Making Biology Programmable' by Varun B.

Robot technology for everyone or only for the average person?
Robot technology is being used more and more in health rehabilitation and in working life.

Novel biomarker technology for cancer diagnostics
A new way of identifying cancer biomarkers has been developed by researchers at Lund University in Sweden.

Technology innovation for neurology
TU Graz researcher Francesco Greco has developed ultra-light tattoo electrodes that are hardly noticeable on the skin and make long-term measurements of brain activity cheaper and easier.

April's SLAS Technology is now available
April's Edition of SLAS Technology Features Cover Article, 'CURATE.AI: Optimizing Personalized Medicine with Artificial Intelligence'.

Technology in higher education: learning with it instead of from it
Technology has shifted the way that professors teach students in higher education.

Post-lithium technology
Next-generation batteries will probably see the replacement of lithium ions by more abundant and environmentally benign alkali metal or multivalent ions.

Rethinking the role of technology in the classroom
Introducing tablets and laptops to the classroom has certain educational virtues, according to Annahita Ball, an assistant professor in the University at Buffalo School of Social Work, but her research suggests that tech has its limitations as well.

The science and technology of FAST
The Five hundred-meter Aperture Spherical radio Telescope (FAST), located in a radio quiet zone, with the targets (e.g., radio pulsars and neutron stars, galactic and extragalactic 21-cm HI emission).

Read More: Technology News and Technology Current Events
Brightsurf.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com.