New method developed for analyzing photonic crystal structure

November 25, 2016

CAMBRIDGE, Mass. -- A new technique developed by MIT researchers reveals the inner details of photonic crystals, synthetic materials whose exotic optical properties are the subject of widespread research.

Photonic crystals are generally made by drilling millions of closely spaced, minuscule holes in a slab of transparent material, using variations of microchip-fabrication methods. Depending on the exact orientation, size, and spacing of these holes, these materials can exhibit a variety of peculiar optical properties, including "superlensing," which allows for magnification that pushes beyond the normal theoretical limits, and "negative refraction," in which light is bent in a direction opposite to its path through normal transparent materials.

But to understand exactly how light of various colors and from various directions moves through photonic crystals requires extremely complex calculations. Researchers often use highly simplified approaches; for example they may only calculate the behavior of light along a single direction or for a single color.

Instead, the new technique makes the full range of information directly visible. Researchers can use a straightforward laboratory setup to display the information -- a pattern of so-called "iso-frequency contours" -- in a graphical form that can be simply photographed and examined, in many cases eliminating the need for calculations. The method is described this week in the journal Science Advances, in a paper by MIT postdoc Bo Zhen, recent Wellesley College graduate and MIT affiliate Emma Regan, MIT professors of physics Marin Soljacic and John Joannopoulos, and four others.

The discovery of this new technique, Zhen explains, came about by looking closely at a phenomenon that the researchers had noticed and even made use of for years, but whose origins they hadn't previously understood. Patterns of scattered light seemed to fan out from samples of photonic materials when the samples were illuminated by laser light. The scattering was surprising, since the underlying crystalline structure was fabricated to be almost perfect in these materials.

"When we would try to do a lasing measurement, we would always see this pattern," Zhen says. "We saw this shape, but we didn't know what was happening." But it did help them to get their experimental setup properly aligned, because the scattered light pattern would appear as soon as the laser beam was properly lined up with the crystal. Upon careful analysis, they realized the scattering patterns were generated by tiny defects in the crystal -- holes that were not perfectly round in shape or that were slightly tapered from one end to the other.

"There is fabrication disorder even in the best samples that can be made," Regan says. "People think that the scattering would be very weak, because the sample is nearly perfect," but it turns out that at certain angles and frequencies, the light scatters very strongly; as much as 50 percent of the incoming light can be scattered. By illuminating the sample in turn with a sequence of different colors, it is possible to build up a full display of the relative paths light beams take, all across the visible spectrum. The scattered light produces a direct view of the iso-frequency contours -- a sort of topographic map of the way light beams of different colors bend as they pass through the photonic crystal.

"This is a very beautiful, very direct way to observe the iso-frequency contours," Soljacic says. "You just shine light at the sample, with the right direction and frequency," and what comes out is a direct image of the needed information, he says.

The finding could potentially be useful for a number of different applications, the team says. For example, it could lead to a way of making large, transparent display screens, where most light would pass straight through as if through a window, but light of specific frequencies would be scattered to produce a clear image on the screen. Or, the method could be used to make private displays that would only be visible to the person directly in front of the screen.

Because it relies on imperfections in the fabrication of the crystal, this method could also be used as a quality-control measure for manufacturing of such materials; the images provide an indication of not only the total amount of imperfections, but also their specific nature -- that is, whether the dominant disorder in the sample comes from noncircular holes or etches that aren't straight -- so that the process can be tuned and improved.

The team also included researchers at MIT Research Laboratory of Electronics, including Yuichi Igarashi (now at NEC Corporation in Japan), Ido Kaminer, Chia Wei Hsu (now at Yale University), and Yichen Shen. The work was supported by the Army Research Office through the Institute for Soldier Nanotechnologies at MIT, and by the U.S. Department of Energy through S3TEC, an Energy Frontier Center.
-end-
ADDITIONAL BACKGROUND:

ARCHIVE:

How to spawn an "exceptional ring"

ARCHIVE:

Trapping light with a twister

Massachusetts Institute of Technology

Related Photonic Crystals Articles from Brightsurf:

Dynamic photonic barcodes record energy transfer at the biointerface
Chen's group recently developed bioresponsive dynamic barcodes, introducing the concept of resonance energy transfer at the interface of the microcavity.

Hidden-symmetry-enforced nexus points of nodal lines in layer-stacked dielectric photonic crystals
The paper reveals that Maxwell's equations can have hidden symmetries induced by the fractional periodicity of the material tensor components and paves the way to finding novel topological degeneracies unique in photonics.

Polarimetric parity-time-symmetric photonic system
Parity-time symmetry (PT), rooting in quantum field theory, are now shining in photonic systems.

Photonic amorphous topological insulator
The current understanding of topological insulators and their classical wave analogues, such as photonic topological insulators, is mainly based on topological band theory.

Photonic crystal light converter
Spectroscopy is the use of light to analyze physical objects and biological samples.

A novel active photonic wireless system to power medical implants
Medical implants, such as pacemakers, serve various functions in patients and help to improve their quality of life.

High-order synthetic dimensions in waveguide photonic lattices
In the recent work, scientists from Max-Born-Institute have shown that a multitude of high-dimensional synthetic lattices naturally emerge in (abstract) photon-number space when a multiport photonic lattice is excited by N indistinguishable photons.

Configurable circuit technology poised to expand silicon photonic applications
Researchers have developed a new way to build power efficient and programmable integrated switching units on a silicon photonics chip.

New invisibility concept and miniaturization of photonic circuits using ultrafast laser
Thanks to its unique three-dimensional manufacturing capacity, ultrafast laser writing is a prime candidate to meet the growing demand for the miniaturization of photonic circuitry, e.g., for scaling up optical quantum computers capacity.

Photonic microwave generation using on-chip optical frequency combs
Using integrated photonic chips fabricated at EPFL, scientists have demonstrated laser-based microwave generators.

Read More: Photonic Crystals News and Photonic Crystals Current Events
Brightsurf.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com.