Researchers map light and sound wave interactions in optical fibers

November 28, 2018

Optical fibers make the internet happen. They are fine threads of glass, as thin as a human hair, produced to transmit light. Optical fibers carry thousands of Giga bits of data per second across the world and back. The same fibers also guide ultrasound waves, somewhat similar to those used in medical imaging.

These two wave phenomena - optical and ultrasonic - possess attributes that are fundamentally different. Fibers are designed to keep propagating light strictly inside an inner core region, since any light that penetrates outside this region represents the loss of a precious signal. In contrast, ultrasonic waves can reach the outer boundaries of fibers, and probe their surroundings.

Intuition, and much of the training given in fundamental undergraduate classes in mechanics and optics, instructs to consider light and sound waves as separate and unrelated entities. But this perspective is incomplete. Propagating light can drive the oscillations of ultrasonic waves, as if it were some kind of transducer, due to the basic rules of electro-magnetism. Likewise, the presence of ultrasound can scatter and modify light waves. Light and sound waves can interact/affect one another and aren't necessarily separate and unrelated.

The research field of opto-mechanics is dedicated to the study of this interplay. Such studies, especially on fibers, can be very useful and bear surprising results. For example, earlier this year research groups at Bar-Ilan University, Israel and EPFL, Switzerland developed sensing protocols that allow optical fibers to "listen" outside an optical fiber where they cannot "look", based on an interplay between light waves and ultrasound. By launching light waves into a single end of a standard telecommunication fiber, the measurement setup could identify and map liquid media over several kilometers. These findings were published in two articles (in the journal Nature Communications). Such methods can serve in oil and gas pipelines, monitoring oceans and lakes, climate studies, desalination plants, process control in chemical industries, and more.

The mutual effects of light and sound waves that co-propagate in a fiber continue to draw interest and attention. In a paper just published in the journal Applied Physics Letters - Photonics, the research group of Prof. Avi Zadok, of Bar-Ilan University's Faculty of Engineering and Institute for Nanotechnology and Advanced Materials, took this study one step further. The group constructed a distributed spectrometer, a measurement protocol that can map local power levels of multiple optical wave components over many kilometers of fiber. "The measurements unravel how the generation of ultrasonic waves can mix these optical waves together. Rather than propagate independently, the opto-mechanical interactions lead to the amplification of certain optical waves, and to the attenuation of others, in complicated fashion. The observed complex dynamics are fully accounted for, however, by a corresponding model," said Zadok.

The report by Zadok and doctoral students Yosef London, Hagai Diamandi and Gil Bashan is highlighted in the journal as an "Editor's Pick". This new insight into the opto-mechanics of optical fibers may now be applied to sensor systems of longer reach, higher spatial resolution, and better precision to assist, for example, in the detection of leaks in reservoirs, dams and pipelines.
-end-


Bar-Ilan University

Related Ultrasound Articles from Brightsurf:

An integrated approach to ultrasound imaging in medicine and biology
Announcing a new article publication for BIO Integration journal. In this editorial, Co-Editor-in-Chief, Pingtong Huang considers an integrated approach to ultrasound imaging in medicine and biology.

PLUS takes 3D ultrasound images of solids
A two-in-one technology provides 3D images of structural defects, such as those that can develop in aircraft and power plants.

Scientists develop noninvasive ultrasound neuromodulation technique
Researchers from the Shenzhen Institutes of Advanced Technology (SIAT) of the Chinese Academy of Sciences developed a noninvasive ultrasound neuromodulation technique, which could potentially modulate neuronal excitability without any harm in the brain.

World's first ultrasound biosensor created in Australia
Most implantable monitors for drug levels and biomarkers invented so far rely on high tech and expensive detectors such as CT scans or MRI.

Ultrasound can make stronger 3D-printed alloys
A study just published in Nature Communications shows high frequency sound waves can have a significant impact on the inner micro-structure of 3D printed alloys, making them more consistent and stronger than those printed conventionally.

Full noncontact laser ultrasound: First human data
Conventional ultrasonography requires contact with the patient's skin with the ultrasound probe for imaging, which causes image variability due to inconsistent probe contact pressure and orientation.

Ultrasound aligns living cells in bioprinted tissues
Researchers have developed a technique to improve the characteristics of engineered tissues by using ultrasound to align living cells during the biofabrication process.

Ultrasound for thrombosis prevention
Researchers established real-time ultrasonic monitoring of the blood's aggregate state using the in vitro blood flow model.

Ultra ultrasound to transform new tech
A new, more sensitive method to measure ultrasound may revolutionize everything from medical devices to unmanned vehicles.

Shoulder 'brightness' on ultrasound may be a sign of diabetes
A shoulder muscle that appears unusually bright on ultrasound may be a warning sign of diabetes, according to a new study.

Read More: Ultrasound News and Ultrasound Current Events
Brightsurf.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com.