MIT develops filters for wastewater treatment, more

December 06, 2000

Membranes that filter larger materials from others are key to wastewater treatment and a variety of other processes. Yet the membranes currently on the market are often easily clogged.

Enter MIT Associate Professor Anne Mayes, who decided that the field was ripe for fresh ideas and has developed a way to not only make better filtration membranes, but also give those membranes additional applications. For example, her team is modifying the membranes to encourage the attachment of living cells-a key goal of tissue engineering. Professor Mayes is in the Department of Materials Science and Engineering.

BLACK ART
To date, the manufacture of filtration membranes has been something of a "black art," principally using a process known as "immersion precipitation." A concentrated polymer solution is spread on a moving belt, skimmed to a thin and level coating, then immersed in a water-containing bath. There the polymer precipitates out of solution, forming a membrane with a suprisingly ideal structure for filtration: small surface pores, with larger channels in the bulk membrane structure.

Unfortunately, this process leaves a very small number of pores on the surface, and the materials that are sufficiently strong for filtering applications are hydrophobic, or water-repelling. Oil- or protein-containing solutions passed through such filters tend to clog or foul them.

In the wastewater treatment industry, cleaning and replacement costs associated with fouling cost some 47 percent of the total process costs. Granted, further treatments can lead to a fouling-resistant surface, but these extra fabrication steps drive up costs and don't always work well, since they treat only the outer surface of the membrane. The inner surfaces of the membrane channels remain foulant attractors.

POLYMER 'COMBS'
Professor Mayes' novel idea was to mix into the bulk membrane polymer solution a "comb" polymer composed of a hydrophobic backbone lined with short hydrophilic, or water-loving, "bristles."

When the membrane is cast from the mixed polymer solution, the different affinities of the comb and bulk polymers cause the combs to segregate to the membrane surface. Thus the membrane ends up with a hydrophilic outer surface and even a hydrophilic lining on the internal membrane channels.

"It turns out that this works extraordinarily well," said Professor Mayes. The presence of hydrophilic groups on the filtrant-exposed surfaces helps the membrane resist fouling.

What's more, the comb-containing membranes have a larger number of pores on the surface than membranes that don't include the additive. This increases the amount of solution that can be passed through the membranes. And the membranes heal themselves: if damaged by a caustic solution, a comb-containing membrane can be heated at approximately 90 degrees C in water to re-segregate excess combs from the bulk and re-line the damaged surfaces with hydrophilic material.

NEW CHEMISTRIES
Professor Mayes and her students are now working on comb backbones made of different materials in the hope of further adapting their approach to other membrane chemistries.

"We've been branching out in terms of our chemistry," Professor Mayes said. "We've developed a new route for the synthesis of these comb additives, and recently applied for a patent on the materials."

"We have other applications, too," Professor Mayes continued. These include tethering chelating agents to the comb "bristles" to trap heavy metals from a filtrant, and tethering cell-signaling ligands to the bristles to encourage cell attachment to, for instance, a membrane being used as an artificial tissue material. To explore bioengineering possibilities, she has teamed up with Professor Linda Griffith of the Department of Chemical Engineering and the Division of Bioengineering and Environmental Health to show that comb polymer additives modified with the cell-adhesion peptide RGD can be used to modulate cell attachment.

"We wanted to make a system where we could control the spatial distribution of ligands on the surface more specifically. Often cell signaling events require clustering of ligand receptors on the surface of cells, and that's what we hope to induce by mixing comb polymers modified with multiple ligands with those having no ligands." The researchers have demonstrated comb surface segregation in the manufacture of tissue-engineering scaffolds.
-end-
Professor Mayes' work is sponsored by the Office of Naval Research, the National Institutes of Health, and the Whitaker Foundation.

Massachusetts Institute of Technology

Related Polymer Articles from Brightsurf:

Impurities enhance polymer LED efficiencies
New research published in EPJ B reveals that the higher-than-expected efficiency of PLEDs can be reached through interactions between triplet excitons, and impurities embedded in their polymer layers.

Safety of bioabsorbable polymer against durable polymer DES in high-risk PCI patients
A novel study sought to reveal whether drug-eluting stents (DES) coated with bioabsorbable polymer (BP) presented a safety advantage without compromising efficacy compared to durable polymer (DP) formulations.

Polymer membranes could benefit from taking a dip
A new technique developed by a team including researchers from the US Department of Energy (DOE)'s Argonne National Laboratory makes atomic layer deposition possible on nearly any membrane.

New polymer material may help batteries become self-healing, recyclable
Lithium-ion batteries are notorious for developing internal electrical shorts that can ignite a battery's liquid electrolytes, leading to explosions and fires.

Researchers add order to polymer gels
Gel-like materials have a wide range of applications, especially in chemistry and medicine.

Bundlemers (new polymer units) could transform industries
From tires to clothes to shampoo, many ubiquitous products are made with polymers, large chain-like molecules made of smaller sub-units, called monomers, bonded together.

New synthetic polymer degradable under very mild acidic conditions
A new type of degradable synthetic polymer was prepared by Rh-catalyzed three-component polymerization of a bis(diazocarbonyl) compound, bis(1,3-diketone), and tetrahydrofuran.

New polymer tackles PFAS pollution
toxic polyfluorinated alkyl substances (PFAS) pollution -- commonly used in non-stick and protective coatings, lubricants and aviation fire-fighting foams -- can now be removed from the environment thanks to a new low-cost, safe and environmentally friendly polymer.

New polymer films conduct heat instead of trapping it
MIT engineers have flipped the picture of the standard polymer insulator, by fabricating thin polymer films that conduct heat -- an ability normally associated with metals.

Polymer reversibly glows white when stretched
Polymers that change their appearance in response to mechanical forces can warn of damage developing in a material before the stress causes structural failure.

Read More: Polymer News and Polymer Current Events
Brightsurf.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com.