Creating a nanoscale on-off switch for heat

December 16, 2019

Polymers are used to develop various materials, such as plastics, nylons, and rubbers. In their most basic form, they are made up of many of identical molecules joined together over and over, like a chain. If you engineer molecules to join together in specific ways, you can control the characteristics of the resulting polymer.

Using this method, Sheng Shen, an associate professor of mechanical engineering at Carnegie Mellon University, and his research team created a polymer thermal regulator that can quickly transform from a conductor to an insulator, and back again. When it's a conductor, heat transfers quickly. When it's an insulator, heat transfer much more slowly. By switching between the two states, the thermal regulator can control its own temperature, as well as the temperature of its surroundings, such as a refrigerator or computer.

In order to switch between high to low conductivity, the very structure of the polymer has to change. This transformation is activated solely with heat. The polymer starts "with a highly-ordered crystalline structure," Shen said. "But once you increase the temperature of the polymer fiber, to around 340 Kelvin, then the molecular structure changes and becomes hexagonal."

The findings were published in Science Advances in a paper titled, "High-Contrast and Reversible Polymer Thermal Regulator by Structural Phase Transition." Collaborators included Carnegie Mellon's Michael Bockstaller, Renkun Chen of the University of California-San Diego, Sukwon Choi of the Pennsylvania State University, Kedar Hippalgaonkar of the Agency for Science Technology and Research (Singapore), and Tengfei Luo of the University of Notre Dame.

The transformation occurs because the heat targets the molecular bonds. "The bonding of the molecules becomes pretty weak," Shen said. "So the segments can rotate." And once the segments rotate, the structure becomes disordered, greatly reducing its thermal conductivity. This type of transition is known as a solid-solid transition; although the polymer reaches temperatures close to its melting point, it remains a solid through the process.

When studying the polymer's transformation, Shen concentrated his data on how its conductivity changed. He also gathered data on other phase transitions so he could compare the ratios. "When you look at all the materials we have on Earth, the conductivity change is, at most, a factor of four," Shen says. "Here, we've already discovered a new material that can have a conductivity change of around ten."

Additionally, the structural change can happen quickly, within a range of five Kelvin. It's also reversible, which allows it to be turned on and off like a switch. It can handle much higher temperatures than other thermal regulators, remaining stable up to 560 Kelvin. It's hard to break down, so it can survive many transitions. And since it's heat-based, it doesn't use as many moving parts as typical cooling methods, making it much more efficient.

While this research has been explored theoretically in the past, Shen's work is the first time it's been shown experimentally. Shen believes that the polymer will have real-world applications. "This control of heat flow at the nanoscale opens up new possibilities," said Shen, "Such as developing switchable thermal devices, solid-state refrigeration, waste heat scavenging, thermal circuits, and computing."

This work builds on previous research in Shen's lab, where his team had developed a polymer nanofiber that was strong, lightweight, thermally conductive, electrically insulating, and bio-compatible--all at less than 100 nanometers wide.
-end-
For more information:

High-contrast and reversible polymer thermal regulator by structural phase transition, Science Advances, 13 Dec 2019, DOI: 10.1126/sciadv.aax3777

https://advances.sciencemag.org/content/5/12/eaax3777

College of Engineering, Carnegie Mellon University

Related Polymer Articles from Brightsurf:

Impurities enhance polymer LED efficiencies
New research published in EPJ B reveals that the higher-than-expected efficiency of PLEDs can be reached through interactions between triplet excitons, and impurities embedded in their polymer layers.

Safety of bioabsorbable polymer against durable polymer DES in high-risk PCI patients
A novel study sought to reveal whether drug-eluting stents (DES) coated with bioabsorbable polymer (BP) presented a safety advantage without compromising efficacy compared to durable polymer (DP) formulations.

Polymer membranes could benefit from taking a dip
A new technique developed by a team including researchers from the US Department of Energy (DOE)'s Argonne National Laboratory makes atomic layer deposition possible on nearly any membrane.

New polymer material may help batteries become self-healing, recyclable
Lithium-ion batteries are notorious for developing internal electrical shorts that can ignite a battery's liquid electrolytes, leading to explosions and fires.

Researchers add order to polymer gels
Gel-like materials have a wide range of applications, especially in chemistry and medicine.

Bundlemers (new polymer units) could transform industries
From tires to clothes to shampoo, many ubiquitous products are made with polymers, large chain-like molecules made of smaller sub-units, called monomers, bonded together.

New synthetic polymer degradable under very mild acidic conditions
A new type of degradable synthetic polymer was prepared by Rh-catalyzed three-component polymerization of a bis(diazocarbonyl) compound, bis(1,3-diketone), and tetrahydrofuran.

New polymer tackles PFAS pollution
toxic polyfluorinated alkyl substances (PFAS) pollution -- commonly used in non-stick and protective coatings, lubricants and aviation fire-fighting foams -- can now be removed from the environment thanks to a new low-cost, safe and environmentally friendly polymer.

New polymer films conduct heat instead of trapping it
MIT engineers have flipped the picture of the standard polymer insulator, by fabricating thin polymer films that conduct heat -- an ability normally associated with metals.

Polymer reversibly glows white when stretched
Polymers that change their appearance in response to mechanical forces can warn of damage developing in a material before the stress causes structural failure.

Read More: Polymer News and Polymer Current Events
Brightsurf.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com.