Resistance makes waves

December 23, 2013

Even physics can give pointers for energy saving. An international team working together with the Centre for Quantum Materials, run by the Max Planck Society in conjunction with the University of British Columbia (Canada), is now in a position to provide materials scientists with tips for the development of high-temperature superconductors, in a bid to make them earn their name. The term is currently used to describe materials including ceramic cuprates, which lose their electrical resistance at significantly higher temperatures than conventional superconductors, but still well below the freezing point of water. In two complementary studies, the physicists have now established that superconductivity in cuprates collapses at a maximum of minus 135 degrees Celsius due to the formation of charge-density waves. These periodic fluctuations in the distribution of the electrical charges destroy superconductivity. Consequently, in order to find superconductors that drop to zero resistance at realistic temperatures, materials scientists must search for substances that are not subject to charge-density waves.

Nearly two per cent of the electrical energy generated by power stations is lost in the grid. In Germany alone, this is equivalent to the power delivered by a medium-sized coal power plant. These losses may increase in the future, as power from large offshore wind farms is transported to the landlocked south. Superconductors could provide a remedy if they were able to deliver power to consumers without loss or leakage, even in summery temperatures. In order to systematically search for such materials, however, physicists must first obtain an accurate picture of why today's best superconductors lose resistance in the first place, and how the temperature at which this happens can be raised - a puzzle researchers have been working on for some 30 years. Little by little, a picture is starting to emerge. Two studies by an international team involving the Max Planck Institute for Solid State Research, as well as the universities of Princeton and British Columbia and the Helmholtz-Zentrum Berlin, have now contributed a few more pieces to the puzzle.

"We have found charge-density waves in cuprates above the temperatures at which they become superconductive", says Bernhard Keimer. "Like superconductivity, these are caused by strong interactions between the electrons." The Director at the Max Planck Institute for Solid State Research in Stuttgart was involved directly in one of the two studies, and in an advisory capacity in the other.

Contest for states decided by a hair's breadth

Physicists have known for years that superconductivity can only arise in the first place if there is strong interaction between electrons. The fact is, forces - which current research assumes to be magnetic forces - bind electrons together to form Cooper pairs and these whizz through the crystal lattice unchecked. Researchers have also known for years that the strong interaction can induce other electronic phenomena such as magnetism or even charge-density waves, which are completely incompatible with superconductivity.

"These different states compete with each other in the materials", explains Keimer. "And which one wins is frequently decided by a mere hair's breadth." This means that whether a material is superconductive or not depends to a very high degree on its elementary composition and its structure, while chance also gets in on the act. Still, the current studies are giving the scientists more of a feeling for when and in what circumstances superconductivity occurs. "We are getting closer to the goal of predicting this state and developing materials that will be superconductors even at high temperatures", says the physicist.

The international team is now contributing to a better understanding of superconductivity with experiments on two materials that contain the characteristic components of copper oxide and bismuth, and which are named Bi2201 and Bi2212 in accordance with the different proportions of elements they contain. The scientists studied a single sample of each material using different methods. In conjunction with a working group from Helmholtz-Zentrum Berlin, the Stuttgart-based Max Planck researchers screened both materials with resonant X-ray scattering using BESSY, the Helmholtz synchrotron. These experiments revealed details of the charge distribution on the inside of the materials. One of the participating scientists then travelled to Princeton University carrying the hermetically sealed material in a case.

There, the project partners scanned the sample with a raster tunnel microscope that records the charge distribution at the surface. Physicists at the University of British Columbia also examined the Bi2201 sample using angle-resolved photoemission spectroscopy, which reveals further details of the electronic structure at the surface of the material.

Charge-density waves occur in all cuprate superconductors

Using the complementary examinations, the scientists demonstrated for both samples that the charge waves occur in different bismuth cuprates, and that they occur throughout the material and not just at the surface. "Since we have already detected the charge-density waves in another cuprate superconductor, we can assume that they occur in all cuprate superconductors and destroy superconductivity", affirms Bernhard Keimer.

One of the two studies has led scientists to complete a different part of the puzzle of high-temperature superconductivity, enabling them to explain anomalies in the band structure of these materials. The band structure is a kind of master plan of a material's electronic behaviour and can be read to determine whether the material is a metallic conductor, an insulator or a semiconductor. It reflects whether electrons are solidly bound, whether they can move freely through the material or whether they need an energy boost to get over a band gap in order to move freely.

The goal: precise control of the strong electronic forces

The band structure of superconductors contains pseudogaps, so called because, unlike the gaps in insulators, these gaps are incomplete and don't even exist for electrons at certain speeds. For many electrons, however, a pseudogap means that the charged particle can no longer move unhindered through the material. "We have now discovered that the cause of the pseudogap lies in the charge-density waves", explains Bernhard Keimer. This is easy to understand, because when electrons take on a fixed order, they lose their mobility. "So ultimately, pseudogaps can also be traced back to the strong interactions between electrons", adds Keimer.

In future, then, efforts will focus on precise control of the strong interactions between electrons. Only this will enable physicists and materials scientists to channel the forces in such a way that they cement Cooper pairs even at ambient temperatures and do not generate charge-density waves. "If we can manage that, we will have made an important contribution to the power supply of the future", says Bernhard Keimer.
-end-
Original publications

R. Comin, A. Frano, M. M. Yee, Y. Yoshida, H. Eisaki, E. Schierle, E. Weschke, R. Sutarto, F. He, A. Soumyanarayanan, Y. He, M. Le Tacon, I.S. Elfimov, J. E. Hoffman, G.A. Sawatzky, B. Keimer und A. Damascelli

Charge order driven by Fermi-arc instability in Bi2Sr2−xLaxCuO6+δ Science express, 19 December 2013

Eduardo H. da Silva Neto, Pegor Aynajian, Alex Frano, Riccardo Comin, Enrico Schierle, Eugen Weschke, András Gyenis, Jinsheng Wen, John Schneeloch, Zhijun Xu, Shimpei Ono, Genda Gu, Mathieu Le Tacon und Ali Yazdani

Ubiquitous Interplay between Charge Ordering and High-Temperature Superconductivity in Cuprates Science express, 19 December 2013

Max-Planck-Gesellschaft

Related Superconductivity Articles from Brightsurf:

New kind of superconductivity discovered
Superconductivity is a phenomenon where an electric circuit loses its resistance and becomes extremely efficient under certain conditions.

Room temperature superconductivity creeping toward possibility
The possibility of achieving room temperature superconductivity took a tiny step forward with a recent discovery by a team of Penn State physicists and materials scientists.

A 'breath of nothing' provides a new perspective on superconductivity
Zero electrical resistance at room temperature? A material with this property, i.e. a room temperature superconductor, could revolutionize power distribution.

New Princeton study takes superconductivity to the edge
The existence of superconducting currents, or supercurrents, along the exterior of a superconductor, has been surprisingly hard to find.

Superconductivity: It's hydrogen's fault
Last summer, it was discovered that there are promising superconductors in a special class of materials, the so-called nickelates.

How a magnet could help boost understanding of superconductivity
Physicists have unraveled a mystery behind the strange behavior of electrons in a ferromagnet, a finding that could eventually help develop high temperature superconductivity.

New study explains why superconductivity takes place in graphene
Theoretical physicists take important step in development of high temperature superconductors.

Better studying superconductivity in single-layer graphene
A new study published in EPJ B demonstrates that an existing technique is better suited for probing superconductivity in pure, single-layer graphene than previously thought.

Stressing metallic material controls superconductivity
No strain, no gain -- that's the credo for Cornell researchers who have helped find a way to control superconductivity in a metallic material by stressing and deforming it.

First report of superconductivity in a nickel oxide material
Scientists at SLAC and Stanford have made the first nickel oxide material that shows clear signs of superconductivity - the ability to transmit electrical current with no loss.

Read More: Superconductivity News and Superconductivity Current Events
Brightsurf.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com.