Thermoelectric power generation at room temperature: Coming soon?

December 26, 2017

Osaka - Thermoelectric (TE) materials could play a key role in future technologies. Although the applications of these remarkable compounds have long been explored, they are mostly limited to high-temperature devices. Recently, researchers at Osaka University, in collaboration with Hitachi, Ltd., developed a new TE material with an improved power factor at room temperature. Their study, published in Physica Status Solidi RRL, could help bring these materials out of the high-temperature niche and into the mainstream.

TE materials display the thermoelectric effect: apply heat on one side, and an electric current starts to flow. Conversely, run an external current through the device, and a temperature gradient forms; i.e., one side becomes hotter than the other. By interconverting heat and electricity, TE materials can be used as either power generators (given a heat source) or refrigerators (given a power supply).

The ideal TE material combines high electrical conductivity, allowing the current to flow, with low thermal conductivity, which prevents the temperature gradient from evening out. The power generation performance mainly depends on the "power factor," which is proportional to both electrical conductivity and a term called the Seebeck coefficient.

"Unfortunately, most TE materials are often based on rare or toxic elements," according to study co-author Sora-at Tanusilp. "To address this, we combined silicon - which is common in TE materials - with ytterbium, to create ytterbium silicide [YbSi2]. We chose ytterbium over other metals for several reasons. First, its compounds are good electrical conductors. Second, YbSi2 is non-toxic. Moreover, this compound has a specific property called valence fluctuation that make it a good TE material at low temperatures."

The first advantage of YbSi2 is that the Yb atoms occupy a mixture of valence states, both +2 and +3. This fluctuation, also known as Kondo resonance, increases the Seebeck coefficient with keeping metal-like high electrical conductivity at low temperature, and therefore the power factor.

Second, YbSi2 has an unusual layered structure. While the Yb atoms occupy crystal planes similar to pure Yb metal, the Si atoms form hexagonal sheets between those planes, resembling the carbon sheets in graphite. This blocks the conduction of heat through the material, and therefore keeps the thermal conductivity down, preserving the temperature gradient. The researchers believe that heat conduction is further suppressed by controlling the structure in nanoscale and traces of impurities and other defects.

The result is an encouragingly high power factor of 2.2 mWm-1K-2 at room temperature. This is competitive with conventional TE materials based on bismuth telluride. As corresponding author of this study Ken Kurosaki explains, "The use of Yb shows we can reconcile the conflicting needs of TE materials through carefully selecting the right metals. Room-temperature TEs, with moderate power, can be seen as complementary to the conventional high-temperature, high-power devices. This could help unlock the benefits of TE in everyday technology."
-end-


Osaka University

Related Thermoelectric Articles from Brightsurf:

Turning heat into power with efficient organic thermoelectric material
Thermoelectric materials can turn a temperature difference into electricity. Organic thermoelectric materials could be used to power wearable electronics or sensors; however, the power output is still very low.

Sprinkled with power: How impurities enhance a thermoelectric material at the atomic level
Magnesium silicide (Mg2Si) is a thermoelectric material that can convert heat into electricity.

Energy-harvesting plastics pass the acid test
Air-stable coatings can improve the longevity of wearable devices that tap into body heat.

Cooling mechanism increases solar energy harvesting for self-powered outdoor sensors
Thermoelectric devices, which use the temperature difference between the top and bottom of the device to generate power, offer some promise for harnessing naturally occurring energy.

Outer tube-selectively boron-doped double-walled carbon nanotubes for thermoelectric applications
A research group led by Hiroyuki Muramatsu of Shinshu University succeeded in selectively doping the outer tube of DWNTs with boron.

Creating stretchable thermoelectric generators
For the first time, a soft and stretchable organic thermoelectric module has been created that can harvest energy from body heat.

How do you power billions of sensors? By converting waste heat into electricity
Osaka University researchers found that thermoelectric power generators lose a great deal of their possible output power because of thermal and electrical contact resistance.

Power dressing
Sensors that are worn on the skin could soon be powered by our own body heat.

Topological semimetals can generate sizable transverse thermoelectric figure of merit
Thermoelectric materials can convert temperature difference in a conducting solid into electrical energy, or vice versa.

Fine-tuning thermoelectric materials for cheaper renewable energy
Researchers from Queen Mary University of London have developed new thermoelectric materials, which could provide a low-cost option for converting heat energy into electricity.

Read More: Thermoelectric News and Thermoelectric Current Events
Brightsurf.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com.