Add BrightSurf on Google Email

Scalable and sustainable chitosan/carbon nanotubes composite protective layer for dendrite‑free and long‑cycling aqueous zinc‑metal batteries

09.20.25 | Shanghai Jiao Tong University Journal Center

Aqueous zinc-ion batteries are celebrated as a green, low-cost alternative for grid storage—if only their anodes would stop growing deadly dendrites. Now, a multi-institutional team led by Prof. Hang Wei (Inner Mongolia University), Prof. Yuanyuan Zhang (IMU) and Prof. Jian Liu (University of Surrey) has borrowed a page from plant cell walls and developed a chitosan/carbon-nanotube (CNT) composite skin that turns ordinary zinc foil into an ultra-stable, dendrite-free and fully recyclable anode—all through a simple scraping process.

Why This Skin Works

Electrochemical Wins

Symmetric cells fitted with the chitosan/CNT skin survive more than 3 000 hours of zinc plating/stripping at 1 mA cm -2 , while bare Zn shorts in under two days. Even at an aggressive 5 mA cm -2 or a deep-discharge depth of 85.6 %, the protected anode keeps cycling for hundreds of hours where bare metal quickly fails. The skin also pushes Zn//Cu coulombic efficiency to > 99 % over 500 cycles and trims the energy barrier for Zn 2+ desolvation from 27.6 kJ mol -1 to 21.5 kJ mol -1 , enabling faster, smoother deposition. In situ CT, Raman and finite-element modelling confirm dendrite-free, smooth plating under realistic current densities.

From Coin to Pouch to Robot

Paired with a commercial V 2 O 5 cathode, the protected anode lifts full-cell capacity to 389 mAh g -1 and pushes energy density above 80 Wh kg⁻¹ while cutting cell-level cost. A soft-pack prototype effortlessly powers a small robot, and the same skin stabilizes Al-ion symmetric cells, hinting at universal metal-anode protection.

Circular Economy Bonus

After cycling, the coating is peeled off, dissolved in glacial acetic acid and centrifuged—> 95 % of CNTs are reclaimed with zero morphology change (TEM verified). Recycled CNTs re-assemble into a fresh layer that still delivers > 500 h of stable cycling, proving true sustainability rather than a buzzword.

Bottom Line

By merging a $10 kg -1 biopolymer with recyclable CNTs through an ambient, binder-free scraping technique, the team offers the field a scalable, low-cost and earth-friendly route to dendrite-free zinc batteries. Expect this chitosan/CNT armor to accelerate the commercial arrival of safe, long-life aqueous storage systems—and to inspire similar bio-recyclable protections for next-gen Mg, Ca and Al metal anodes.

Stay tuned for more green-energy innovations from the IMU–Surrey–Swansea collaboration!

Nano-Micro Letters

10.1007/s40820-025-01837-7

Experimental study

Scalable and Sustainable Chitosan/Carbon Nanotubes Composite Protective Layer for Dendrite‑Free and Long‑Cycling Aqueous Zinc‑Metal Batteries

8-Jul-2025

Keywords

Article Information

Contact Information

Bowen Li
Shanghai Jiao Tong University Journal Center
qkzx@sjtu.edu.cn

Source

This article is based on a news release from Shanghai Jiao Tong University Journal Center. BrightSurf curates and republishes science news from research institutions worldwide; the original release is linked below.

How to Cite This Article

APA:
Shanghai Jiao Tong University Journal Center. (2025, September 20). Scalable and sustainable chitosan/carbon nanotubes composite protective layer for dendrite‑free and long‑cycling aqueous zinc‑metal batteries. Brightsurf News. https://www.brightsurf.com/news/LPEWNNN8/scalable-and-sustainable-chitosancarbon-nanotubes-composite-protective-layer-for-dendritefree-and-longcycling-aqueous-zincmetal-batteries.html
MLA:
"Scalable and sustainable chitosan/carbon nanotubes composite protective layer for dendrite‑free and long‑cycling aqueous zinc‑metal batteries." Brightsurf News, Sep. 20 2025, https://www.brightsurf.com/news/LPEWNNN8/scalable-and-sustainable-chitosancarbon-nanotubes-composite-protective-layer-for-dendritefree-and-longcycling-aqueous-zincmetal-batteries.html.