Researchers at Tokyo Tech developed a novel architecture that reduces jitter and boosts performance in electronic devices. The non-uniform OSPLL increases loop bandwidth by 60 times, minimizing jitters and reducing power consumption.
Researchers developed a bionic finger that can create 3D maps of internal shapes and textures by touching an object's exterior surface. The device uses carbon fibers to detect stiffness or softness and creates detailed maps of complex objects.
Researchers have discovered a way to construct and control oxygen-deprived walls in nanoscopically thin materials, which can store data in multiple electronic dialects. These walls can retain their data states even when devices turn off, paving the way for next-gen electronics with enhanced memory capabilities.
Researchers at KAUST have developed a rapid and sensitive soil moisture sensor using metal-organic frameworks (MOFs) to optimize water usage in agriculture. The MOF-based sensor shows high sensitivity and selectivity for water even in the presence of metal ions, enabling precise irrigation management.
Researchers at North Carolina State University used a new laser technique to improve the performance of lithium-ion batteries. The technique creates tiny defects in graphite material, which can enhance battery performance, increase current capacity by up to 20%, and reduce the risk of fires. However, excessive defects can lead to probl...
Researchers at Drexel University have developed a thin film device that can dynamically control electromagnetic wave shielding using MXene materials. The device can convert from shielding to quasi-electromagnetic wave transmission by electrochemical oxidation, making it suitable for various security applications.
Researchers at North Carolina State University have developed a highly sensitive and stretchable strain sensor that can detect minor changes in strain with great range of motion. The sensor's innovative design features a patterned cut network that enables it to withstand significant deformation without sacrificing sensitivity.
The device can monitor hemoglobin levels in deep tissues with high spatial resolution, providing critical information for timely interventions. It overcomes limitations of existing methods, such as MRI and X-ray-computed tomography, which are bulky and only provide immediate status information.
Current tobacco and electronic nicotine delivery systems use associated with increased risk of bleeding after brushing or flossing. Longitudinal studies highlight the importance of tobacco cessation counseling in clinical practice.
A new space-time coding antenna developed at City University of Hong Kong enables manipulation of beam direction, frequency, and amplitude for improved user flexibility in 6G wireless communications. The antenna relies on software control and combines research advances in leaky-wave antennas and space-time coding techniques.
Scientists at Tokyo University of Science developed an 'extended Landau free energy model' to analyze complex interactions in nanomagnetic devices, enabling causal analysis and visualization. The model proposed optimal structures for nano-devices with low power consumption.
Scientists at North Carolina State University have created a low-cost solution for making wearable electronics by embroidering power-generating yarns onto fabric. The technique allows for self-powered sensors, including motion tracking and numeric keypads, with durable performance even after washing and rubbing tests.
A new technique allows printing electronic circuits onto curved and corrugated surfaces without binding agents, paving the way for soft electronic technologies. Prototype smart contact lenses, pressure-sensitive gloves, and transparent electrodes have been created using this method.
Scientists have developed a method to accurately measure the thermal expansion coefficient of 2D materials when heated, which could help engineers design next-generation electronics. The approach uses laser light to track vibrations of atoms in the material, allowing for precise measurements and confirming theoretical calculations.
Researchers at KAUST have developed a spintronics-based logic lock to defend chip security, which can be integrated into electronic chips to fend off malicious attacks. The design uses magnetic tunnel junctions to scramble the circuit's operation unless the correct key combination signal is supplied.
Researchers at Monash University found that electric fields and applied strain can turn magnetism on and off in two-dimensional metal-organic frameworks. This discovery could lead to applications in magnetic memory, spintronics, and quantum computing.
A University of Illinois team discovered liquid crystalline epoxy resins with high thermal conductivity, outperforming common polymers by up to 5 times. The breakthrough was achieved by precisely controlling the lengths of ethylene repeat units in the polymer structure.
KAUST researchers have designed a smart glass system that can encode data into the light passing through it, allowing for wireless data transmission. The system uses polarization manipulation to eliminate flicker problems and can transmit data at rates of up to 16 Kilobits per second.
Researchers review emerging field of 2D ferroelectric materials with layered van-der-Waals crystal structures, offering new properties and functionalities not found in conventional materials. These materials show easily stackable nature, making them attractive as building blocks for post-Moore's law electronics.
An AI-based model has been developed to assist radiologists in detecting and identifying leadless implanted electronic devices (LLIEDs) on chest X-ray images. The model achieved high detection and classification accuracy, even with suboptimal image quality, and showed promise for real-world deployment.
Researchers at Drexel University have developed a composite material that can absorb and dissipate electromagnetic waves, reducing electromagnetic interference. The MXene-polymer coating has shown to be highly effective in absorbing energy at greater than 90% efficiency.
A new study from San Diego State University's Fowler College of Business found that monitoring cellphone screen time with specific goals in mind can lead to higher perceived productivity and user satisfaction. However, excessive self-monitoring can induce fatigue and weaken the effect on productivity.
A study published in the Canadian Journal of Cardiology found that smartwatch health apps detecting atrial fibrillation generated a high rate of false positives and inconclusive results, especially in patients with certain cardiac conditions. Better algorithms and machine learning may help improve the accuracy of these devices.
Researchers developed a smart mouthguard that translates complex bite patterns into instructions to control devices such as computers, smartphones and wheelchairs. The device achieves 98% accuracy and has the potential to support individuals with limited dexterity or neurological disorders.
The NTU-developed wind harvester generates a voltage of three volts at wind speeds as low as two meters per second, powering commercial sensor devices. The device can also store excess charge for extended periods in the absence of wind, serving as an alternative to smaller lithium-ion batteries.
Researchers have developed a breakthrough approach to precisely assemble nanowires on virtually any platform, enabling the creation of highly sensitive optomechanical sensors. The new pick-and-place assembly process uses ultra-thin filaments and adhesive van der Waals forces to transfer nanowires with sub-micron accuracy.
Scientists developed a cellulose nanofiber-carbon fiber composite film with excellent in-plane anisotropic thermal conductivity, improving heat dissipation in thin-film devices. The material also exhibits recyclability and can be reused after burning the cellulose matrix.
Researchers have developed a new technique to dope gallium nitride (GaN), creating high-power electronic devices with reduced energy loss and increased efficiency. This breakthrough enables the use of GaN in compact power electronics for sustainable infrastructure, such as smart grids.
Scientists have developed a magnetized state in monolayer tungsten ditelluride, allowing for controlled electron flow and potential applications in non-volatile memory chips. The discovery enables the creation of smaller, more energy-efficient devices that consume less power and dissipate less energy.
Researchers at the University of Virginia School of Medicine have successfully engineered a material that can conduct electricity with zero resistance, paving the way for revolutionary technologies. The breakthrough uses DNA to guide chemical reactions, overcoming a long-standing challenge in materials science.
Researchers have developed instruments for single-molecule electrochemistry and spectroscopy, aiming to design and synthesize materials with chemistry, physics, and engineering at the atomic scale. They discuss challenges and opportunities in functionalizing molecular junctions and forming stable molecular electronic devices.
Scientists have successfully switched the state of a bit in memory using spin-orbit torque switching in antiferromagnetic material Mn3Sn, promising faster and more efficient devices. This breakthrough could lead to radical improvements in performance compared to current electronic devices.
A team of researchers from Tokyo University of Science has developed a novel multi-proton carrier complex that shows efficient proton conductivity even at high temperatures. The resulting starburst-type metal complex acts as a proton transmitter, making it 6 times more potent than individual imidazole molecules.
A joint research team proposes a dual-plating strategy to rapidly construct new zinc-bromine microbatteries with ultrahigh areal energy density and polarity-switchable functionality. The method eliminates the synthesis of active materials and avoids mass matching, resulting in record-high areal capacity and energy density.
Researchers observe a significant increase in electrical conductivity when mica is thinned down to few molecular layers, exhibiting semiconductor-like behavior. The findings suggest that thin mica flakes have the potential to be used in two-dimensional electronic devices with exceptional stability and durability.
A team of researchers from Tokyo University of Science has developed an efficient integrated materials synthesis system for automatic discovery of new functional magnetic materials. Using artificial intelligence and computational science, they identified promising materials five times more efficiently than traditional trial-and-error a...
A Northwestern University-led team developed a biocompatible implant that uses targeted cooling to relieve pain on demand. The device, which can be controlled remotely, has the potential to provide an alternative to highly addictive medications.
A systematic review and meta-analysis of 52 studies found that electronic noses can accurately detect volatile organic compounds in exhaled breath for cancer diagnosis. The diagnostic accuracy varied across studies, with some showing high sensitivity and specificity.
Researchers at SUTD design a multiferroic van der Waals heterostructure combining magnetic and ferroelectric 2D materials, offering voltage switchable magnetism. This material can be used for ultracompact memory devices with minimal energy consumption.
Researchers showcase electrospun nanomaterials' advantages over conventional materials for wearables. They offer enhanced porosity, breathability, and biocompatibility, enabling rapid charging, high energy storage capacities, and comfortable wearability.
University of Missouri researchers develop wearable smart bioelectronic devices, including a 'smart' face mask that can monitor physiological status and detect respiratory problems. The masks also use laser-assisted fabrication to provide breathable soft electronics for better real-time health monitoring.
A team of researchers at the University of Tsukuba has developed a new method for measuring tiny changes in magnetic fields using nitrogen-vacancy defects in diamonds. This breakthrough could lead to more accurate quantum sensors and spintronic computers, enabling precise monitoring of temperature, magnetic, and electric fields.
Researchers use machine learning to automatically analyze Reflection High-Energy Electron Diffraction (RHEED) data, enabling faster and more efficient discovery of new materials. The study focused on surface superstructures in thin-film silicon surfaces and identified optimal synthesis conditions using non-negative matrix factorization.
Researchers at KTH Royal Institute of Technology have developed a thermoelectric coating that converts low-grade heat into electrical power, with potential to replace batteries in wearables and IoT devices. The coating can be applied to any surface that generates heat, enabling efficient energy harvesting.
Researchers at the Indian Institute of Science discovered that microscopic voids in lithium anodes cause dendrite formation in solid-state batteries. By adding a thin layer of refractory metals to the electrolyte surface, they delayed dendrite growth and extended battery life.
Researchers at NTU Singapore have developed a flexible and durable fabric that harnesses energy from human movements, providing a potential solution for wearable power sources. The fabric generates enough electricity to light up LEDs and charge capacitors, demonstrating its potential for use in smart textiles and wearable electronics.
A new cooling method offers substantial space efficiency, increasing power per unit volume by up to 740% compared to conventional approaches. The solution uses copper coatings that cover all exposed surfaces and eliminate the need for thermal interface materials or heat sinks.
Researchers have discovered that 90% of known crystalline structures contain at least one topological property, and more than 50% exhibit some sort of topological behavior. The newly identified materials are stored in a freely accessible database, allowing scientists to quickly search for materials with robust electronic properties.
Researchers have developed a system that harnesses energy from sunlight to power small devices, making it ideal for off-grid situations. The innovative device uses non-toxic algae to generate electricity continuously without running down like traditional batteries.
Researchers at the University of Missouri-Columbia have developed a novel approach to reprogramming cardiac implantable devices during MRI scans remotely. This technology has shown safe and effective results, saving time and money by eliminating the need for device representatives or on-site personnel.
Researchers have discovered layered 2D materials that can host unique magnetic features, including skyrmions, which remain stable at room temperature. The discovery could lead to novel low-energy data storage and information processing systems.
Researchers at Samsung have developed a novel approach to inspect critical dimensions of semiconductor devices, improving speed and resolution. The new 'line-scan hyperspectral imaging' (LHSI) technique offers faster measurements with high spatial resolution, outperforming existing methods.
Researchers at Hebrew University have discovered a new magnetic phenomenon called edge magnetism, where materials only retain magnetism on their edge. This discovery could revolutionize the production of spintronics devices, enabling the creation of ultra-thin wire magnets with curved shapes.
A new magneto-electric transistor has been developed by researchers at the University of Nebraska-Lincoln and the University at Buffalo. The design can reduce energy consumption by up to 75% and retain memory in event of power loss, making it a promising alternative to silicon-based transistors.
Researchers have developed a new encryption technique that leverages hardware and software to improve file system security for next-generation non-volatile memories. This approach allows for faster performance than existing software security technologies, making it suitable for large data centers and cloud systems.
Researchers successfully grow high-quality single-crystal graphene sheets on insulating supports using a copper-catalyzed decomposition method. The resulting graphene exhibits excellent electronic performance due to its high crystallinity and minimal surface folds.
Scientists at the Beckman Institute designed an organic complex to study how electrons flow between molecules. Their findings hold potential for developing efficient organic electronic devices such as batteries and energy storage systems.
Scientists at Stanford University have created a stretchy display that can change shape in response to user interaction. The display uses elastic light-emitting polymers and has a maximum brightness two times that of a typical cellphone, allowing it to be stretched up to twice its original length without tearing.
Researchers at North Carolina State University have developed a way to prevent short-circuiting in yarns designed to store energy by wrapping them with an insulating thread. The findings could advance the development of smart textiles that capture energy from wearer's movements and power sensors.
Researchers developed a new material by adding polyethylene glycol to polyvinyl alcohol, increasing its energy storage efficiency. The improved polymer mixture can be used in lithium polymer batteries, solar cells, and field-effect transistors, potentially leading to increased capacity and reduced power consumption.