Articles tagged with Electronics
Dr. Bruce Gnade, professor emeritus at the University of Texas at Dallas, has been elected as a member of the National Academy of Engineering for his contributions to advancing electronic materials and semiconductor device technologies. He is also recognized for his leadership in education and workforce development.
Researchers at Technical University of Denmark developed a groundbreaking nanolaser that can halve a computer's energy consumption. This technology has the potential to revolutionize various industries, including information technology and healthcare, by enabling ultra-small and energy-efficient lasers.
The article highlights the psychological demands of self-driving cars on human brains, citing Professor McLeod's research and personal experience. He emphasizes the need for clearer interfaces, simulation-based training, and updated driving tests to address these challenges and ensure safe automation uptake across society.
A team of researchers led by Yoshiteru Maeno used magnetic resonance based on muons to investigate the superconducting state of strontium ruthenate. They discovered that the material exhibits spin-singlet superconductivity, which provides crucial insights into the behavior of unconventional superconductors.
Researchers at Harbin Institute of Technology in China report a method to fabricate transparent conductive films on curved surfaces. The technique, using multi-angle co-velocity fitting deposition model, produces smooth and continuous films with high transparency and low electrical resistance.
Researchers have developed a long, needle-thin brain electrode with channels that enables neural signal recording and precisely targeted medication delivery across different brain regions. The technology has primarily been developed for basic research but may be important for future treatments in epilepsy and other neurological diseases.
Three Illinois Tech engineers recognized for their contributions to sustainable wireless communication and networking. Boris Pervan also received an award for his work on satellite navigation integrity. Thomas Wong honored for his research in high-frequency electronics and materials characterization.
Researchers have discovered a new thermoelectric material, MoSi2, that can convert waste heat into electricity with high efficiency. The material's unique electronic structure and axis-dependent conduction polarity enable it to generate transverse thermopower, paving the way for efficient waste heat recovery systems.
A new window technology shields buildings from EMP threats while maintaining transparency. The innovative design offers broadband EMP protection with high optical transparency, suitable for practical architectural applications.
Researchers at Harvard University have developed a new design method for optimizing rolling contact joints in robots, which can lead to better grippers, assistive devices, and more efficient robotic movement. The optimized joints performed spectacularly, correcting misalignment by 99% in knee-assist devices.
By changing the physical structure of gold, researchers can drastically change its interaction with light, leading to enhanced electronic behavior and improved absorption of light energy. This study demonstrates the potential of nanoporous gold as a new design parameter for engineering materials in advanced technologies.
NTU Singapore is launching three new space projects under the Space Access Programme to accelerate the commercialization of space technologies. The projects include an AI-enabled satellite, a nanosatellite testing next-generation solar cells, and another nanosatellite with advanced propulsion systems.
Researchers at Chungnam National University have developed an AI model that uses deep learning to predict stable defect configurations in materials. The model, trained on data generated by conventional simulations, can generate results in milliseconds rather than hours, accelerating the material design process.
A research team at Chiba University has overcome the efficiency trade-off to create organic multifunctional devices that can both light up and power themselves. By precisely controlling exciton binding energy, they achieved low voltage loss and full-color operation across the visible spectrum.
Researchers introduce a novel fabrication technique to create high-resolution, low-resistance graphene electrodes for transparent and flexible devices. The method achieves exceptionally low electrical resistance and high pattern fidelity without etching-induced defects or chemical contamination.
A nanostructure composed of silver and an atomically thin semiconductor layer can be turned into an ultrafast switching mirror device, displaying properties of both light and matter. This discovery could lead to dramatically increased information transmission rates in optical data processing.
The ŌURA–NUS Joint Lab combines wearable biometric data with sleep science expertise to study how sleep and physical activity shape long-term health outcomes. The lab aims to generate insights that help individuals, clinicians, and health systems shift from reactive care to proactive preventive health.
Researchers at TU Wien have developed a nano membrane with an extremely compact parallel-plate capacitor, achieving a new world record in measurement technology. The structure enables ultra-high-resolution atomic force microscopy with superior noise performance limited only by quantum physics.
Jing Yang, a University of Virginia professor, has been recognized by the Institute of Electrical and Electronics Engineers (IEEE) for her pioneering work on energy-harvesting wireless communications and Age of Information optimization. Her research aims to improve efficiency, timeliness, and sustainability in modern wireless networks.
A new hybrid wireless access network called PHWAN has been proposed to improve the performance of smart factories. The framework combines different wireless systems, including 5G, Wi-Fi, and low-power industrial networks, to adapt dynamically to the needs of different machines.
A team of researchers from Keio University has developed a novel system that uses Gaussian process regression to model and reproduce complex human motions. This enables robots to adapt to touch and interact with objects in dynamic environments, improving their dexterity and versatility.
Researchers at Meijo University have developed the world's first continuous-wave UV-B semiconductor laser diode operating at room temperature on a low-cost sapphire substrate. The achievement advances compact, energy-efficient UV light sources for various applications.
Researchers at Jeonbuk National University propose hierarchical porous copper nanosheet-based triboelectric nanogenerators, demonstrating efficient energy harvesting and multifunctionality. The devices achieve a remarkable 590% increase in electrical output while maintaining stability over 100,000 repeated mechanical cycles.
Researchers develop ultralight biomass conductive elastomer that self-foams at room temperature, heals in 5 hours, and recycles five times without property loss. The 'micro-spring' lattice offers a gauge factor of 4.8 under 1% strain, making it suitable for wearable, foldable, and reusable soft electronics.
Researchers developed a bio-inspired neuron platform that processes and learns information using light and electronics integrated on a single platform. The chip achieves 92% image recognition accuracy and demonstrates key synaptic behaviors found in biological learning.
Researchers from Japan successfully downscaled a total ferroelectric memory capacitor stack to just 30 nm, maintaining high remanent polarization and paving the way for compact and efficient on-chip memory. This breakthrough demonstrates compatibility with semiconductor devices and paves the way for future technologies.
Mircea Stan, a University of Virginia professor, has been awarded the National Academy of Inventors fellowship for his innovative work on low-power computer technology. His contributions have enabled significant energy savings and improved performance in electronic systems.
Researchers developed an anode-free lithium metal battery that delivers nearly double driving range using the same battery volume. The battery's volumetric energy density of 1,270 Wh/L is nearly twice that of current lithium-ion batteries used in electric vehicles.
Researchers have created a design framework for magnetic cloaks that can protect sensitive electronics and sensors from magnetic interference. The new concept enables shielding of components in fusion reactors, medical imaging systems, and isolating quantum sensors.
Researchers from Chonnam National University propose a novel delay-compensated control strategy that eliminates current sensors in boost PFC converters. This simplifies circuitry, reduces hardware failure points, and enhances power quality, leading to smaller, more efficient, and cost-effective power adapters.
Researchers propose a new design approach for intracortical electrodes that can record from many neurons at once without damaging them. The authors outline various manufacturing approaches, including advanced silicon micromachining and thermal fiber drawing, to create flexible devices with low stiffness.
A new study from Kyoto University has identified a one-component superconducting state in strontium ruthenate, defying earlier predictions. The researchers developed a technique to apply shear strain to extremely thin crystals, finding that it had virtually no effect on the superconducting temperature.
Marty Cooper, Illinois Tech alumnus and 'Father of the Cell Phone,' is being honored for his legacy of mentorship and inspiring others through innovation. He received the 2025 Marconi Society Lifetime Achievement Award for his lifetime of leadership in wireless communications.
Researchers at Empa's Mechanics of Materials and Nanostructures laboratory are working to improve the insulation material used in satellites and space probes. They have developed a new intermediate layer that makes the material more elastic and resistant to cracks and flaking, enabling better superinsulation for future satellites.
Researchers develop a method to tune thermal conductivity in thin films using femtosecond lasers, achieving unprecedented throughput and nanoscale resolution. The technique enables laboratory-scale precision and industrial-scale production of phononic nanostructures.
L. Jay Guo, University of Michigan professor, recognized for scalable nanopatterning technology enabling next-gen flexible electronics and structural color applications. His work has attracted interest from major companies like Samsung and Toyota.
MIT researchers developed a new fabrication method to stack multiple functional components on top of one existing circuit, reducing energy wasted during computation. The new approach enables the production of more energy-efficient electronics, boosting computation speed and reducing electricity consumption.
Researchers have created a method to encode binary information and transmit signals on a chip using quasiparticles called magnons. The spiral geometry of tiny, twisted magnetic tubes enables data transmission at room temperature, with no electron flow required.
Researchers have developed a new acoustic wave-producing technology on an electronic chip, enabling customizable curved waves for trapping objects, routing wave information, and transporting fluids. This innovation has significant potential in medical applications, such as noninvasive surgery and biosensors.
Scientists have developed an electrically conductive patch that can be ironed onto fabric, enabling diverse applications in healthcare, environmental monitoring, and robotics. The innovative technology uses a gallium-indium alloy and polyurethane mixture to create a stretchable film.
Researchers use smartphone microphones to detect sound waves that can penetrate through rubble, helping locate trapped victims. The method achieved an error of 5.04 degrees away from the hypothetical victim in a field test on a disaster training site.
The MIT team developed a new AI-based controller that enables the robot to follow gymnastic flight paths, such as executing continuous body flips. The robot's speed and acceleration increased by 450% and 250%, respectively, compared to previous demonstrations, making it comparable to insects in terms of agility.
Researchers have developed silver-based atomic switches that create stable electrical connections between individual molecules and electrodes, enabling the scalable integration of molecular components. This breakthrough paves the way for ultra-compact and energy-efficient circuits built from single molecules.
Synchrotron radiation sources provide a toolkit for characterizing quantum materials and devices, enabling precise control over quantum systems. Key methods include non-destructive imaging and X-ray diffraction.
Researchers from Keio University Global Research Institute successfully generated orbital currents using sound waves, establishing a foundation for integrating acoustic technology with orbitronics. The discovery paves the way for next-generation electronic devices.
Research suggests that health apps, wearables, and interactive programs can improve physical activity, diet, and weight outcomes for children and teens. Mobile apps had the greatest impact on diet and weight outcomes, while wearables were most effective for reducing sedentary time.
Scientists at Institute of Science Tokyo developed an automatic and adaptive LED-based optical wireless power transmission system that can efficiently power multiple devices without interruption. The system overcomes limitations of traditional OWPT systems by adapting to varying lighting conditions and ensuring stable power delivery.
A team of Korean researchers has successfully integrated a single memristor into micro-LED pixels, replacing the traditional driving transistor and storage capacitor. This innovation enables more efficient and easier-to-build displays with improved brightness and color accuracy.
Researchers at MIT developed microscopic, wireless bioelectronics that can identify and travel to specific brain regions without human guidance. These implants provide focused treatment for brain diseases like Alzheimer's and multiple sclerosis by wirelessly powering electrical stimulation in precise areas.
Researchers have captured a new polar order in a hybrid crystal, enabling electric control of spin-orbit coupling and circular photogalvanic effect. The material exhibits three hallmarks: switchable net polarization, asynchronous switching, and field-driven polar-to-polar transition.
Researchers at Rice University have discovered that light can trigger a physical shift in atomic lattice, creating tunable behavior and properties in transition metal dichalcogenide (TMD) materials. This effect could advance technologies using light instead of electricity, such as faster computer chips and ultrasensitive sensors.
Researchers have developed a numerical model to optimize avalanche photodiodes for detecting photons in ultraviolet wavelengths. The study improved the design of Geiger-mode avalanche photodiodes, resulting in high single-photon detection efficiencies up to 71% for photons with a wavelength of 340 nm.
Researchers have developed a new method for calibrating electrical resistance using memristors, which can provide stable resistance values directly linked to fundamental constants of nature. This approach eliminates the need for complex cooling systems or high magnetic fields, making it a simpler alternative to current systems.
The team successfully tested a hybrid Cessna 337 plane with a smaller, more efficient silicon carbide-based motor drive system. The technology reduces the overall size and weight of the plane, making it ideal for small aircraft where space is limited.
Researchers at South China University of Technology develop a method to solve unstable anode:electrolyte interfaces using digital light processing (DLP) 3D printing. The resulting batteries retain over 91% capacity after 8,000 cycles and achieve stable cycling over 2,000 hours.
A novel cellulose-based piezoresistive sensor has been developed for interference-free respiratory rate monitoring. This customizable cylindrical architecture pairs MXene nanosheets with TEMPO-oxidised cellulose nanofibrils, enabling accurate tracking under different environmental conditions.
Researchers at the University of Cambridge found that the human eye has a resolution limit, above which screens provide more information than can be detected. For an average UK living room, a 44-inch 4K or 8K TV does not offer additional benefits over a lower resolution Quad HD TV.
University of Houston researchers have discovered a material with thermal conductivity exceeding 2,100 watts per meter per Kelvin at room temperature. This breakthrough challenges existing theories and could lead to the development of new semiconductor materials with improved thermal management in electronics and data centers.
Researchers from Xi'an Jiao Tong University develop on-skin epidermal electronics for next-generation wearable devices that overcome traditional wearables' limitations. This technology enables long-term, high-fidelity health monitoring with innovative design features.
The WSU-led team created antennas that remain stable when bent or exposed to high humidity, temperature variations, and salt. They also developed a processor chip that can correct errant signals in real-time.