Articles tagged with Materials Engineering
The University of Texas at El Paso has received a $917,000 grant from the Air Force Office of Scientific Research to develop advanced materials for national defense, power electronics, and security. UTEP students will perform cutting-edge research on gallium oxide-based semiconductors.
Researchers at Aarhus University have developed a simple analytical model to predict chip formation and optimize surface finish in manufacturing processes. The study reveals the critical cutting depth for almost every material, tool geometry, and running conditions, minimizing tool wear and improving product quality.
Scientists have created a new material using nanometer-scale ceramic particles decorated with polymer strands that exhibit enhanced toughness. The material's unique property allows it to dissipate energy from impacts rapidly, making it suitable for applications such as body armor and bulletproof glass.
A new design for thermal actuators accelerates soft robotic movement by exploiting temperature-dependent bi-stability. The structure changes shape in response to heat, allowing for rapid snapping actions. Prototypes demonstrate rapid movement capabilities, paving the way for biomedical, prosthetic, and manufacturing applications.
Researchers at Lawrence Berkeley National Laboratory have developed water-walking liquid robots that can retrieve and deliver precious chemicals autonomously. The robots use chemistry to control buoyancy and do not require electrical energy, making them ideal for applications such as chemical synthesis and drug delivery.
Researchers from Brazil and international collaborators demonstrate the conversion of low-cost waste biomass into bioplastic, electronic devices, and other high-value materials. The study highlights the potential of this approach to address global waste management challenges and promote a circular economy.
Researchers at City University of Hong Kong have discovered a new type of sound wave that vibrates transversely and carries both spin and orbital angular momentum like light. This finding provides new degrees of freedom for sound manipulations, enabling unprecedented acoustic communications and sensing capabilities.
Researchers at the University of Texas at Austin have developed a new sodium-based battery material that overcomes the dendrite problem in earlier sodium batteries. The new material recharges as quickly as a traditional lithium-ion battery and has a higher energy capacity than existing sodium-ion batteries.
Researchers from Osaka University have successfully grown high-quality magnetite thin films on a hexagonal boron nitride substrate without compromising the film's properties. This breakthrough enables the development of flexible spintronics devices with preserved electronic and magnetic properties.
The study found that certain grain boundaries in strontium titanate exhibit enhanced thermal expansion, leading to potential material failures. This discovery highlights the importance of grain boundaries in material properties and has implications for selecting suitable materials for various applications.
Researchers have synthesized a new form of carbon glass with three-dimensional bonds, the hardest known glass material. The discovery has potential for mass production and opens up new possibilities in devices and electronics.
Researchers genetically engineer E. coli microbes to convert glucose into olefins, a type of hydrocarbon found in gasoline, using a two-step process with a catalyst. This method has potential to advance green energy technology and create sustainable biofuels.
Scientists from City University of Hong Kong successfully developed battery-like electrochemical Nb2CTx MXene electrodes with stable voltage output and high energy density. The findings break the performance bottleneck of MXene devices, exhibiting superior rate capability, durable cyclic performance, and high energy density.
Researchers from The University of Tokyo Institute of Industrial Science used computer simulations to study the aging mechanism that can cause an amorphous glassy material to turn into a crystal. By removing tiny irregularities in local densities, they found that it prevents atomic avalanches that trigger ordered structure formation.
Scientists at Washington University in St. Louis have created a biocompatible adhesive hydrogel that can stick to various surfaces underwater, with properties similar to natural mussel foot protein and spider silk. This breakthrough has potential applications in tissue repair, particularly for tendon-bone repair.
Researchers at the University at Buffalo have created model protein-RNA droplets with properties similar to those of viscoelastic Maxwell fluid and Silly Putty. These droplets exhibit dual behavior, acting like both elastic solids and viscous liquids, depending on the timescale.
A team at Sandia National Laboratories tested specially designed stainless-steel containers for fire safety and found they did not split open even when heated to 2000 degrees Fahrenheit. The containers developed small pinholes instead, allowing superheated gas to escape without pressurizing the container.
Borophene, a 2D version of boron, can be synthesized on hexagonal boron nitride using weak van der Waals forces. This method allows for easier removal and evaluation of the material for its plasmonic and photonic properties, as well as its electronic properties relevant to superconductivity.
Researchers at UNSW have developed liquid metal enabled continuous flow reactors that can produce materials with tuneable system performance and controlled material quality. The systems rely on surface tension to pump fluids, eliminating the need for mechanical parts.
Researchers at Pohang University of Science & Technology developed an anticounterfeit technology that stores information in two separate domains: visible light and infrared light. This technology enhances security by using a new material called metasurface, allowing for dual protection with one security card.
Lignocellulose, a plant-based material, can be used to create light-reactive surfaces for windows or materials that react to certain chemicals. By customizing lignocellulose, researchers can improve light absorption and achieve better operating efficiency in solar cells.
Researchers at University of Missouri and University of Chicago develop an artificial material that can respond to its environment, make decisions, and perform actions not directed by humans. The material uses a computer chip to control information processing and convert energy into mechanical energy.
Scientists from the University of Tsukuba have created a method to grow conducting polymers with magnetic properties using harmless virus particles as templates. The resulting polymer networks exhibit helical antiferromagnetic behavior, opening doors for applications in biosensors and virus detection.
A team of Lehigh University undergraduates has won the National Institutes of Health's Healthcare Technologies for Low-Resource Settings Prize for developing a diagnostic device to detect sickle cell disease in infants. The $15,000 prize will support further development and testing of the device, which could improve healthcare outcomes...
Researchers have identified a complex alloy system that can be strengthened and made more ductile using quantum-mechanical modeling. This breakthrough may lead to more efficient engines, lowering fuel consumption and greenhouse gas emissions in the aviation industry.
A team of researchers at the University of Konstanz has developed a new method for producing polyethylene with added polar groups, which enhances its degradability while maintaining its durability. The new plastic exhibits slow chain degradation in simulated sunlight, unlike conventional polyethylenes.
Researchers from the University of Groningen and Lawrence Livermore National Laboratory created ultra-lightweight yet extremely stiff porous materials by stacking carbon tubes with a strutted tube-in-tube structure. This innovative design enables new applications in micro-electromechanical systems and other small devices.
Texas A&M researchers are advancing technology to give touch devices the ability to mimic physical objects, enriching virtual environments and reducing audiovisual overload. The goal is to create predictive models for designing devices with maximum haptic effect and minimum sensitivity to users and environmental variations.
Researchers from City University of Hong Kong created a new titanium-based alloy using additive manufacturing, boasting unprecedented structures and properties. The alloy exhibits high tensile strength, excellent work-hardening capacity, and is up to 40% lighter than stainless steel, making it suitable for various structural applications.
Scientists have designed a compact photonic circuit that uses sound waves to control light, outperforming previous alternatives and optimizing compatibility with atom-based sensors. The new device is simple in design, uses common optical materials, and can be adapted for different wavelengths of light.
Plant biologists at Washington University in St. Louis have developed the first artificial scaffolds that can support individual plant cells, mimicking the properties of plant cell walls. The scaffolds demonstrate promising results for studying plant cell adhesion and growth.
Researchers created a paper-like material that folds itself into new shapes in response to environmental humidity, with potential applications in self-folding envelopes and boxes. The material's ability to morph on demand could lead to the development of autonomous origami robots and other complex shapes.
Researchers created a sulfur-selenium alloy that outperforms traditional coatings in protecting steel from corrosion and oxidation. The material's self-healing properties allow it to recover from scratches and damage, making it suitable for infrastructure applications.
Researchers used machine learning to analyze core-loss spectroscopy data, revealing connections between spectral data and material properties. The study successfully predicted intensive and extensive material properties, enabling high-throughput development of new materials.
Researchers found that tuning the interface and twist angle of layered 2D materials enhances key properties, leading to stronger interlayer coupling and improved electronic and optical device performance. This discovery has great importance for various applications in optoelectronics, electronics, batteries, lighting, and appliances.
Functionalized metal-organic frameworks (MOFs) show improved hydrogen interaction, increasing storage capabilities by 15-80%. The study uses machine learning to predict binding energy and reduce computationally heavy calculations.
UNSW researchers stabilize a new intermediate phase in a room-temperature multiferroic material under stress, boosting electromechanical response by double its usual value. This breakthrough has exciting implications for next-generation devices and provides a valuable technique for international material scientists.
A novel machine learning approach has been developed to understand symmetry and trends in materials, enabling researchers to group similar classes of material together. The technique uses a large, unstructured dataset gleaned from 25,000 images to identify structural similarities and trends.
Researchers at Harvard John A. Paulson School of Engineering and Applied Sciences have developed an elastomer that is both stiff and tough, resolving the long-standing conundrum in polymer science. The new material has high toughness, strength, and fatigue resistance, making it suitable for applications such as tissue regeneration, bio...
Researchers have found that a conventional model for predicting material microstructure does not apply to polycrystalline materials. They used near-field high energy diffraction microscopy (HEDM) to study grain boundaries, revealing that the model's predictions are inconsistent with experimental data.
The Quantum Sensors project aims to create ultrasensitive gyroscopes and accelerometers using quantum states, enabling precise measurements for self-driving cars and spacecraft. This technology could capture information not provided by GPS, improving navigation and stability in various environments.
A team of researchers from Osaka University has designed a sulfonated polyaniline network for reservoir computing, achieving 70% accuracy in speech recognition tasks. The device uses an electrochemical approach and has potential applications in the development of artificial intelligence devices.
Scientists discovered structural and surface chemistry defects in superconducting niobium qubits that may cause loss. The study pinpointed these defects using state-of-the-art characterization capabilities at the Center for Functional Nanomaterials and National Synchrotron Light Source II.
Researchers at Aalto University created intricate shapes like letters by manipulating tiny metal balls with vibrating plates and energy fields. The smart algorithm efficiently guided the particles to achieve desired shapes, inspired by natural phenomena like wind and water.
Bioengineer Kevin McHugh is developing a platform to improve the performance of injectable drugs, which often release diminishing amounts of medication over time. The goal is to create predictable, long-lasting delivery systems for better patient outcomes and reduced dosing frequency.
Researchers from Osaka University introduced a non-contact quality control technology to 3D printing by detecting fine-scale defects below the surface of 3D-printed metal assemblies. They used laser ultrasonics to uncover small defects that are frequently difficult to image.
Researchers developed a simple and fast way to create complex semiconductors by growing 2D perovskites precisely layered with other materials, resulting in crystals with wide electronic properties. The assembly takes place in vials where chemical ingredients tumble around in water, with barbell-shaped molecules directing the action.
Researchers developed a theoretical model to predict the strength of millions of alloys at high temperatures. Experiments confirmed the predictions, highlighting the importance of edge dislocations in determining yield strength in complex high-entropy alloys.
A UCLA-led team develops a breakthrough in microbial fuel cells by adding silver nanoparticles to bacteria, boosting electron transport efficiency and generating more electricity. The innovation could lead to practical applications of renewable energy from wastewater treatment.
A study by Purdue University and collaborators has found a way to demonstrate habituation and sensitization in nickel oxide, a quantum material that mimics the sea slug's most essential intelligence features. This discovery could lead to building hardware-based AI with improved efficiency and reduced energy consumption.
A new study reveals the emergence of magnetism in a 2D organic material due to strong electron-electron interactions in its unique star-like atomic-scale structure. The findings have potential applications in next-generation electronics based on organic nanomaterials.
A universal descriptor has been found to indicate the best electrolytes for organic redox flow batteries, reducing experimentation time. This breakthrough could speed up the development of new storage technologies, enabling grid-scale energy storage with a stable grid.
A research team at POSTECH has developed a stretchable anisotropic conductive film that connects flexible electronic devices. The film enables high-resolution circuits connection, low-temperature processing, and production scalability for deformable devices and displays.
Researchers have discovered that MAX phases ceramics can form kink-bands under loading, which can effectively stop cracks from growing and even close and heal them. This self-healing mechanism makes MAX phases suitable for a variety of advanced structural applications, including efficient jet engines and safer nuclear reactors.
Researchers from Nagoya Institute of Technology synthesized elastic polymer films with versatile elongation and fracture properties using photo-modulus patterning. The films' Young's modulus can be controlled by post-preparation photo reaction, making them suitable for diverse applications.
Researchers have discovered a new material that can produce beautiful optical phenomena, including concentric rainbows. The technology has potential applications in aiding autonomous vehicles in recognizing traffic signs, particularly in real-world conditions.
Researchers from Pusan University developed a super-stretchable, deformable, and durable material for 'super-flexible' alternating current electroluminescent devices. The material was successfully applied in devices that functioned with up to 1200% elongation, displaying stable luminescence over 1000 cycles.
Berkeley Lab researchers developed a method to increase the efficiency of LED devices by applying mechanical strain to thin semiconductor films. This approach reduces exciton annihilation, allowing for high-performance LEDs even at high brightness levels.
Researchers from University of Technology Sydney have developed new technology that integrates quantum sources and waveguides on chip using hexagonal boron nitride and adhesive tape. This innovation paves the way for future everyday use of quantum communications, improving online security and privacy.
Researchers at the University of South Florida discovered that glassy polymers, or plastics, have a soft, rubbery layer on their surface that can be controlled. This breakthrough could lead to improved properties such as adhesion and scratch resistance in materials like automobile paint and cellphone screens.