Articles tagged with Electric Current
Dr. Pieter Gunnink receives a €190,000 grant to develop a theoretical framework for enhancing spin current transport in open magnon systems. This project aims to enable new information processing techniques using spintronics. The EU's Marie Skłodowska-Curie Actions program supports researchers at all career stages.
Scientists at STAR collaboration observe magnetic field's impact on charged particles, providing new insight into quark-gluon plasma's electrical conductivity. The findings give scientists a way to study QGP's fundamental properties, shedding light on the universe's most powerful magnetic fields.
Researchers at MIT successfully printed compact, magnetic-cored solenoids using a customized multimaterial 3D printer. The printed solenoids can withstand twice as much electric current and generate a magnetic field three times larger than other 3D-printed devices.
Scientists at Shanghai Institute of Microsystem and Information Technology enhance the photon-number-resolving capability of single-photon detectors by widening superconducting strips. This results in better dynamic range and fidelity, enabling true-photon-number resolution up to 10.
Researchers have developed a novel optical neural network architecture that achieves nonlinear optical computation by precisely controlling ultrashort pulse propagation in multimode fibers. This approach streamlines the need for energy-intensive digital processes, achieving comparable accuracy with significantly reduced parameters.
A University of Oxford study has used machine learning to bridge the 'reality gap' between predicted and observed behavior in quantum devices. The approach enables accurate predictions and informs compensation approaches to mitigate unwanted effects of material imperfections.
Researchers found that space weather events can trigger 'wrong side' failures in rail signalling systems, which are more hazardous than 'right side' failures. This study highlights the need for the industry to consider the risks of space weather and explore mitigation strategies.
Researchers at Washington State University have developed a single strand of fiber that combines the flexibility of cotton with the electric conductivity of polyaniline. The newly created material showed good potential for wearable e-textiles, including detecting hazardous exposures and tracking human vital signs.
Researchers found that repetitive transcranial magnetic stimulation (rTMS) improved event-based prospective memory in patients with schizophrenia, but not time-based prospective memory. The study suggests rTMS as a potential therapeutic option for prospective memory impairments in individuals with schizophrenia.
Researchers at the University of Illinois have developed a diamond semiconductor device with the highest breakdown voltage and lowest leakage current. The device operates at high voltages and currents without losing electrical performance, making it suitable for applications such as solar panels and wind turbines.
Electric current in certain materials flows as a continuum rather than with discrete quasi-electrons, according to new research. This challenges the traditional picture of electrons and quasiparticles.
The UTSA MATRIX AI Consortium has received a $2 million grant to create new AI models that rapidly learn, adapt, and operate in uncertain conditions. The team aims to bridge the gap between human brain processing efficiency and current AI limitations, enabling more efficient and adaptive AI systems.
The University of Houston has received $5 million in DOE funding to develop high-performance superconducting tapes. The project aims to improve manufacturing efficiency and reduce costs, enabling the technology's widespread adoption in clean energy applications.
Researchers add graphene to Bi-2223 superconductors, increasing critical current density and improving phase formation. The findings suggest potential applications in various fields, including power generation, transportation, and quantum computing.
A new strategy optimizes optical and electrical characteristics of thin c-Si solar cells, improving conversion efficiency by 28% compared to industrial thick counterparts. The proposed design uses a layer transfer method and metal nanofilms for enhanced light absorption and surface passivation.
A novel biodegradable optical fiber made from agar has been developed to measure or modulate electrical currents in the body. The fiber can be used to monitor bioelectrical stimuli produced in the brain or muscles, serving as a biodegradable alternative to conventional electrodes.
A new device design inspires improved integrated circuit designs by visualizing electric current flow lines around sharp bends. The research enables better understanding of heat generation in electronic devices, leading to more efficient circuit creation and reduced risk of overheating.
Researchers at TU Wien developed a comprehensive computer model of realistic graphene structures, showing that the material's desired effects are stable even with defects. This means graphene can be used in quantum information technology and sensing without needing to be perfect.
Researchers at Tohoku University developed a framework to predict how the structure of solid-state electrolytes affects battery performance. The framework uses a genetic algorithm and computational modeling to accurately predict electrolyte conductivity and identify key factors that affect performance.
Researchers have identified a mechanism explaining the characteristic properties of strange metals, which operate outside normal rules of electricity. The theory combines two properties: electron entanglement and nonuniform atomic arrangement, resulting in electrical resistance.
Gallium oxide-based flash memory device demonstrates high performance and stability in extreme temperatures and radiation, retaining data for over 80 minutes. The team aims to improve device properties through further material quality and design advancements.
Researchers discovered 'oxygen hole' formation in LiNiO2 cathodes accelerates degradation and release of oxygen. Computational studies revealed nickel charge remains stable while oxygen undergoes changes during charging.
Researchers at Nagoya University developed a nanosheet device with the highest energy storage performance yet seen. The device achieved a 1-2 orders of magnitude higher energy density while maintaining high output density and stability over multiple cycles.
Scientists have observed the direct visualization of a zero-field pair density wave in an iron-based superconductor, EuRbFe4As4, without a magnetic field. This discovery paves the way for further research into room-temperature superconductivity and its potential applications.
Researchers have developed a groundbreaking photonic integrated circuit chip that combines light source, modulator, photodiode, waveguide, and Y-branch splitter on a single substrate. The GaN-on-silicon platform reduces fabrication complexity and cost, enabling compact and high-performing devices.
Researchers developed a new spectropolarimetric imaging technique called DIP-SP, which integrates a passive polarization modulator into an imaging spectrometer. This approach enables high-dimensional information capture from incomplete measurements and significantly improves image quality.
Japanese researchers develop improved ternary superconductor bulks from liquid sources, demonstrating enhanced performance and microstructural analysis shows significant reductions in secondary phase particle size. The findings have huge potential for applications in magnetic levitation, electric motors, and energy systems.
Researchers found that introducing financial trading in California's wholesale electricity market led to reduced volatility in prices, production costs, and carbon emissions. The study also showed improved physical market outcomes, including lower fuel costs and reduced complexity in real-time markets.
Researchers use spectroscopic imaging scanning tunneling microscope to map atomic positions and measure electric charge, revealing link between electron density and atomic arrangements. The discovery sheds light on the emergence of a 'charge density wave' that distorts lattice vibrations and locks atoms in place.
A team of scientists has found a way to directly manipulate the spin of electrons in 2D materials like graphene, a long-standing challenge. They used a novel experimental technique to study the properties of how electrons spin in these materials.
Scientists create high-performance bulk magnesium diboride superconducting magnets with low-cost technique, exhibiting good critical current density and trapped magnetic field. The work paves the way for commercialization of MgB2 superconducting magnets.
Researchers at MIT developed an ingestible capsule that delivers electrical stimulation to the stomach, boosting ghrelin production and potentially alleviating nausea and appetite loss. The device uses a grooved surface to create a drier environment for electrodes to contact stomach tissue.
The WVU SMARTER center aims to improve mobility in rural areas through self-driving cars, ride-sharing services, and bike sharing. The center will develop infrastructure and technology barriers to ensure accessibility for all people.
Researchers developed a perovskite nanoplatelet laser on a diamond substrate, achieving efficient heat dissipation and low pump-density-dependent temperature sensitivity. The study demonstrates potential for electrically driven perovskite lasers.
Researchers at Texas A&M University have identified a new circuit element called the meminductor, which exhibits memory-like properties. The discovery was made using a two-terminal passive system and proved the existence of meminductance in an inductor circuit element.
Researchers have discovered a novel form of ferroelectricity in a single-element bismuth monolayer that can produce regular and reversible dipole moments. This breakthrough expands the scope for non-volatile memories and electronic sensors.
WVU engineers developed a new electrode cuff called MouseFlex to test electric current treatments, overcoming previous challenges with stability and durability. The device can withstand high electrical stimulation and may benefit patients with conditions like rheumatoid arthritis and drug-resistant epilepsy.
Researchers at King Abdullah University of Science & Technology (KAUST) successfully integrated two-dimensional materials on silicon microchips, achieving high integration density, electronic performance, and yield. The resulting hybrid devices exhibit special electronic properties that enable low-power consumption artificial neural ne...
Researchers have created a micrometre-size model of atomic graphene to study defects, which are crucial for the material's properties. The model reveals that common defects form in early stages of growth and lead to stable defect configurations.
Brazilian researchers used a high-speed camera to capture an image of lightning rods trying to connect to nearby buildings, revealing details of the connections. The image shows that even with multiple lightning rods in place, the strike connected to a smokestack on top of one building, highlighting the importance of proper installation.
Australian scientists have discovered an enzyme called Huc that converts air into energy by using the low amounts of hydrogen in the atmosphere. This discovery opens the way to create devices that produce energy from thin air, offering a sustainable alternative to solar-powered devices.
Researchers developed a new method to distinguish current carriers in the BCS-BEC crossover, a phase transition between superfluids and superconductors. The team measured fluctuations of currents, quantified as the Fano factor, which can identify single-particle- and pair-currents.
New study by Curtin University researchers finds that silicon, gold, and copper can trap and destroy the spike proteins of SARS-CoV-2, likely killing the virus. The materials can be used in air filters, coatings, or fabric to capture coronaviruses and prevent infection.
TUS researchers develop novel method to create multi-walled CNT wiring on plastic films under ambient conditions, enabling flexible devices and energy conversion devices. The proposed method produces high-quality wires with varying resistance values.
Researchers found that certain wearable devices using bioimpedance sensing technology can interfere with CRT devices, causing pacing interruptions or unnecessary shocks to the heart. The study suggests that future clinical studies are needed to evaluate patients with CIEDs and wearables.
Researchers from Nanjing University have proposed the first scheme to practically generate N-photon states deterministically using a lithium-niobate-on-insulator platform. The scheme involves deterministic parametric down-conversion and demonstrates feasibility for generating multiphoton qubit states.
A team of researchers led by Boston College Assistant Professor Brian Zhou developed a new quantum sensor technique to image and understand the origin of photocurrent flow in Weyl semimetals. They found that the electrical current flows in a four-fold vortex pattern around where light is shined on the material.
A $2.3 million grant from the US Department of Energy funds a 'solar testbed' at I-79 Technology Park in Fairmont, supporting research on battery storage, grid integration, and cybersecurity. The project aims to assess solar panel health and monitor grid interactions with solar power.
Scientists from Nagoya Institute of Technology have discovered that Auger recombination rate decreases with increasing excited carrier concentration under high injection conditions. This finding has significant implications for optimizing SiC bipolar device efficiency and development of next-generation high-power devices.
Researchers have created a supercapacitor that combines high power and energy density using a 'breathing' electrode with chlorine gas. The new device achieves rapid charge separation and mass transfer, increasing its energy storage capacity.
Chung-Ang University researchers identify direct electron tunnelling as dominant mechanism of noise in organic photodetectors, enabling enhanced detection speed and improved image sensor performance. The discovery paves the way for miniaturized image sensors with curved designs and omnidirectional sensing capabilities.
Georgia Tech researchers developed a new nanoelectronics platform based on graphene, enabling smaller devices, higher speeds, and less heat. The platform may lead to the discovery of a new quasiparticle, potentially exploiting the elusive Majorana fermion.
A new parallel peripheral-photoinhibition lithography system has been developed, enabling the fabrication of subdiffraction-limit features with high efficiency. The system uses two beams to excite and inhibit polymerization, allowing for nonperiodic and complex patterns to be printed simultaneously.
Researchers at Johannes Gutenberg University Mainz developed a prototype that combines Brownian and reservoir computing to perform Boolean logic operations. This innovation uses metallic thin films exhibiting magnetic skyrmions to achieve energy savings through automatic system reset.
A team of researchers has developed a prototype of a quantum microscope that can see electric currents, detect fluctuating magnetic fields, and even see single molecules on a surface. The microscope uses atomic impurities and van der Waals materials to achieve high resolution sensitivity and simultaneous imaging of magnetic fields and ...
A team co-led by CityU developed a wearable electrotactile rendering system that can mimic the sensation of touch with high spatial resolution and a rapid response rate. The device has various application potential, including enhancing VR/AR experiences and facilitating work in thick gloves.
Researchers at MIT designed simple microparticles that can collectively generate complex behavior, generating a beating clock that can power tiny robotic devices. The particles use a simple chemical reaction to interact with each other and create an oscillatory electrical signal.
Researchers have successfully switched on and off topological states in a material, exploiting the interaction of electrons to manipulate their behavior. The discovery opens up new possibilities for technical applications, including quantum computers and sensor technology.
Researchers have successfully prepared highly dense superconducting bulk magnesium diboride with a high current density using an unconventional spark plasma sintering method. The material exhibits excellent superconducting properties, including a high critical current density of up to 6.75 x 10^5 ampere/cm^2 at -253°C.
A team of researchers identified a protein kinase substrate downstream of the dopamine signaling pathway regulating brain reward behavior. The study found that phosphorylation of potassium voltage-gated channel subfamily Q member 2 (KCNQ2) decreases its channel activity, increasing neuronal excitability and promoting reward behavior.