Articles tagged with Nanofabrication
Researchers have developed a 3D electrode inspired by an aquatic plant, which captures and transports gas bubbles to increase hydrogen production. The design achieved a current density eight times higher than common flat electrodes, collecting 53.9% more hydrogen.
Researchers used microwave-based 3D printing to create ceramic components with near-zero porosity and improved strength. The hybrid technique eliminates microscopic holes and traps gas bubbles, allowing for more bending force before breaking.
Prof. Yanquan Geng's team has devised a way to carve variable-depth, three-dimensional trenches into gallium antimonide using a microscopic tip vibrating thousands of times per second. This process improves the crystal's structural integrity and enables the creation of pristine 3D nanogrooves with controlled depths and widths.
Researchers create living tissue at near-physiological cell density using a new bioprinting strategy called embedded 3D printing in a cell-dense suspension (EPICS). The method enables the precise fabrication of perfusable channels and dense cellular environments, mimicking real organs.
The Harvard team developed a new microfabrication method to produce high-performance, curved optical mirrors with extremely smooth surfaces. The mirrors can control light at near-infrared wavelengths, enabling fast and efficient quantum networking.
Researchers at TU Wien have successfully created and read a QR code smaller than most bacteria, setting a new world record. The technology has enormous potential for long-term data storage, with the ability to store over 2 terabytes of data on a single A4 sheet.
Researchers at Concordia University have developed a new 3D-printing technique using sound waves to print tiny structures onto soft polymers with greater precision than before. This approach, called proximal sound printing, enables the production of complex microfluidic channels and flexible sensors in a single process.
Scientists at Drexel University have developed a scalable method for producing one-dimensional MXene nanoscrolls, offering superior electrical conductivity and mechanical strength. The new material shows promise in applications such as energy storage devices, biosensors, and wearable technology.
Researchers have developed a new method to fabricate three-dimensional nanoscale devices from single-crystal materials using a focused ion beam instrument. They created helical-shaped devices that behave like switchable diodes, allowing electricity to flow more easily in one direction than the other.
A team of researchers at Northern Arizona University discovered that fabricated gold, copper and iron nanocrystals exhibit pentagonal constructs resembling natural snowflakes, governed by emergence dynamics. This phenomenon holds key findings for controlling nanomaterial synthesis and advancing the field.
Researchers at Hong Kong Polytechnic University create a new machining method that combines laser and magnetic fields to machine advanced materials like high-entropy alloys. The dual-field approach produces smoother surfaces, reduced damage, and improved material removal rates.
Researchers created an ultrathin hydrogel electrode that can track vital signals without interruption, overcoming previous dehydration, freezing, and mechanical fragility issues. The new material forms a flexible layer that can withstand extreme temperatures and retain water content over time.
Researchers at Nanjing University of Aeronautics and Astronautics created an active metal metamaterial that can bend and recover its shape, enabling aircraft wings to morph smoothly in flight. The material is lightweight, strong, and capable of adjusting its shape on demand.
Scientists from ISTA and Brandeis University develop a geometric framework that predicts viable structures in self-assembling particles. The 'high-dimensional convex polyhedron' tool helps identify constraints that prevent certain outcomes, offering insights into designing custom-made nanomaterials.
Researchers developed a bio-inspired neuron platform that processes and learns information using light and electronics integrated on a single platform. The chip achieves 92% image recognition accuracy and demonstrates key synaptic behaviors found in biological learning.
Scientists create natural surfaces with 3D nanowrinkles that control light, liquids, and living cells. The method uses laser polarization to guide the material's organization, enabling precise control over wrinkle formation and applications in bio-inspired surfaces and sensors.
Researchers create a new method for laser-based powder bed fusion that achieves unprecedented lattice walls and surfaces while reducing memory demand. The approach enables the high-fidelity fabrication of microscale shell lattices with improved strength and toughness.
Researchers propose a new design approach for intracortical electrodes that can record from many neurons at once without damaging them. The authors outline various manufacturing approaches, including advanced silicon micromachining and thermal fiber drawing, to create flexible devices with low stiffness.
Researchers at Empa's Mechanics of Materials and Nanostructures laboratory are working to improve the insulation material used in satellites and space probes. They have developed a new intermediate layer that makes the material more elastic and resistant to cracks and flaking, enabling better superinsulation for future satellites.
A team of Korean researchers has successfully integrated a single memristor into micro-LED pixels, replacing the traditional driving transistor and storage capacitor. This innovation enables more efficient and easier-to-build displays with improved brightness and color accuracy.
Researchers explore Field-assisted Additive Manufacturing for micro/nano device fabrication, enabling targeted motion, cell growth, and flexible electronics. The technology holds promise for industries such as biomedical engineering and microrobotics.
Global experts discuss the future of additive manufacturing in various applications, including bioprinting living tissues and creating smart consumer products. Researchers showcase advancements in machine learning, real-time sensing, and multi-material 3D printing.
Researchers at South China University of Technology develop a method to solve unstable anode:electrolyte interfaces using digital light processing (DLP) 3D printing. The resulting batteries retain over 91% capacity after 8,000 cycles and achieve stable cycling over 2,000 hours.
Researchers are developing 'biohybrid robots' that flex and move using biological tissue, offering potential applications in medicine and industry. The field is advancing through advanced fabrication methods, such as 3D bioprinting and electrospinning, which enable precise control over muscle cells.
A new platform allows researchers to study the forces that bind tiny objects together, revealing insights into self-assembly processes and fundamental forces in nature. The platform uses gold flakes in a salt solution, with light bouncing back and forth through nanometre-sized cavities to display colors.
A new post-processing route improves tensile strength and ductility in 3D-printed alloys by combining deep cryogenic treatment and laser shock peening. This method transforms the microscopic structure of 3D-printed metals, relieving internal stresses and enhancing mechanical resilience.
Researchers at Sun Yat-sen University create a new method for fabricating ultra-uniform surface structures with features as small as 46 nanometers. The technique uses a carefully tuned femtosecond laser under water immersion, overcoming the challenge of creating uniform nanostructures smaller than 100 nanometers.
Researchers have developed atomic-level precision patterning on nanoparticle surfaces using stencils, creating 'patchy nanoparticles' with various shapes and functions. The technique allows for large-scale production of batched particles with intricate designs, enabling the creation of novel materials and metamaterials.
Researchers introduce HydroSpread, a new fabrication method for creating soft robots that can move and adapt on their own. The technology uses liquid polymer to create ultrathin, uniform sheets on water's surface, allowing for complex patterns and controlled movement.
Researchers at Kobe University investigated how different manufacturing techniques affect the electronic structure of magnetic tunnel junctions. They found that the surface of ferromagnets is different when insulators are transferred to them compared to growing crystals on insulator flakes. This difference influences device behavior, p...
Scientists at the University of Gothenburg have developed the smallest on-chip motor in history, capable of fitting inside a human hair. The new motor uses laser light to set gears in motion, enabling microscopic machines that can control light and manipulate small particles.
Researchers are making progress in overcoming technical hurdles to create layered structures, continuous gradients, and fully three-dimensional architectures with programmable material variation. Optimized laser parameters and build sequences can enhance strength, control heat flow, and improve energy absorption.
Researchers developed novel artificial bone scaffolds with high deformation recovery capabilities, exceeding those of natural bone and conventional metallic scaffolds. These scaffolds allow for flexible adjustments of properties like strength and modulus to meet specific implantation site requirements.
The new Harvard device can turn purely digital electronic inputs into analog optical signals at high speeds, addressing the bottleneck of computing and data interconnects. It has the potential to enable advances in microwave photonics and emerging optical computing approaches.
Researchers have developed a smart hydrogel surface that can instantly recognize whether it's in contact with oil or water and switch its behavior to separate the two. The surface achieves a record-breaking separation speed of 17,750 liters per square meter per hour, three to five times faster than most current membranes.
Researchers are combining machine learning algorithms with neuromorphic hardware to build brain-like devices that can learn from data and adapt in real-time. These devices have the potential to revolutionize industries such as manufacturing by enabling machines to sense their environment, adapt to new tasks, and make decisions without ...
Researchers developed a new 3D printing method that creates strong, high-quality silicon carbide (SiC) ceramic parts at lower temperatures. The method uses vat-polymerization and adds silica to improve material quality, resulting in comparable strength to ceramics sintered at higher temperatures.
Laser-generated nanoparticles offer a cleaner, scalable alternative to traditional chemical synthesis methods for electronics applications. The method, called laser ablation in liquids, produces surfactant-free, highly pure metal-based nanoparticles with tailored surface properties.
A team of UCF researchers is pioneering a new nanocoating to passively mitigate the effects of lunar dust, protect equipment and extend future lunar missions. The goal is to understand how lunar dust interacts with surfaces and design surface properties that repel the dust.
Researchers developed a novel fabrication method for thin-film temperature sensors that operate across an exceptionally wide temperature range, from –50 °C to 950 °C. The technique eliminates the need for complex protective layers, making it faster and cheaper to produce sensors.
A new laser machining method enables high-precision patterned laser micro-grooving with root mean square errors below 0.5 μm. This technique allows for rapid and scalable manufacturing of custom microstructures, advancing applications in microfluidic devices, sensors, and heat dissipation systems.
The article discusses the use of solution-processed 2D materials to fabricate memristors, offering a scalable alternative to traditional methods. Recent breakthroughs have overcome manufacturing limitations, producing larger and less-damaged nanosheets with improved device performance.
The article discusses recent advancements in ultrafast laser nanofabrication techniques, including near-field and far-field laser methods. These techniques have demonstrated the ability to create nanostructures with feature sizes as small as 11 nm and 26 nm, respectively.
Researchers at EPFL's Bionanophotonic Systems Laboratory developed a biosensor that detects biomolecules using inelastic electron tunneling, enabling ultra-sensitive and real-time detection without bulky equipment. The sensor can detect amino acids and polymers at picogram concentrations, rivaling advanced sensors.
A team of Korean researchers has successfully recreated a golden fiber akin to that of 2,000 years ago using the pen shell cultivated in Korean coastal waters. The breakthrough reveals the scientific basis behind its unchanging golden color and demonstrates the potential of eco-friendly materials.
Researchers Mostafa Bedewy and Ahmed Aziz Ezzat are advancing nanomanufacturing by using machine learning to control the formation of nanoparticles and grow carbon nanotubes. The team aims to reveal which nanoparticles act as seeds for growing nanotubes, a key step towards creating ideal high-density structures.
Researchers developed self-propelled ferroptosis nanoinducers to enhance cancer therapy by inducing programmed cell death. The nanotherapeutics exhibited enhanced diffusion and deep tumor penetration while maintaining biocompatibility.
Researchers developed AI system that detects 'fingerprint' from 3D printed parts, tracing origin to specific machine. This technology has major implications for supplier management and quality control.
Triboelectric and piezoelectric nanogenerators convert mechanical energy into electrical energy, enhancing robotic autonomy and efficiency. The technology has the potential to reshape future robotic capabilities, particularly in industrial automation, healthcare, and smart home applications.
Researchers from Florida Atlantic University and the German Electron Synchrotron mapped the internal structure of blacktip sharks in unprecedented detail, discovering a microscopic 'sharkitecture' composed of densely packed collagen and bioapatite. This intricate structure gives cartilage surprising strength while allowing flexibility.
Quantum Base, a Lancaster University spin-out, has successfully floated on the London Stock Exchange with a £4.8 million fundraising. The company aims to harness quantum technology to address real-world challenges through its patented Q-ID solution for anti-counterfeiting.
Researchers have created quantum holograms using metasurfaces and nonlinear crystals, enabling precise control over entangled information. The technology holds promise for practical applications in quantum communication and anti-counterfeiting, with potential to increase information capacity and reduce system size.
Multi-photon 3D nanoprinting enables 3D processing beyond the diffraction limit, with applications in optics, biology, and mechanical engineering. However, slow processing speed and materials limitations hinder its large-scale industrial production.
The article reviews additive manufacturing technology for biomedical metals, enabling customized implants with precise internal structures. It highlights the integration of AI and 4D printing, addressing challenges in production costs, regulatory compliance, and post-processing.
A new photocatalytic chemical mechanical polishing (PCMP) slurry has been developed for Single Crystal Diamond (SCD) polishing, resulting in exceptionally smooth surfaces with minimal damage. The Material Removal Rate (MRR) peaks at 1168 nm·h−1, emphasizing the efficiency and effectiveness of this advanced polishing technique.
Researchers at Tohoku University discovered a novel propagation phenomenon in surface acoustic waves, leading to the development of innovative acoustic devices. The study, published in Physical Review Letters, reveals asymmetrical diffraction behavior that can be controlled using magnetic fields.
Researchers developed a 7-axis synchronization algorithm for freeform surface laser texturing, achieving high efficiency and accuracy without stitching errors. The approach improves processing efficiency by up to 559% and reduces errors by 60%, making it suitable for industrial applications.
Researchers at KAIST developed CamBio, a biotemplating method utilizing specific intracellular proteins to create functional nanostructures with high tunability. The method enables the selective synthesis of nanostructures from biological samples, showing improved performance in surface-enhanced Raman spectroscopy substrate detection.
Researchers at Chalmers University of Technology and University of Maryland have engineered a new type of refrigerator that can autonomously cool superconducting qubits to record-low temperatures. This breakthrough paves the way for more reliable and error-free quantum computations.
Scientists at the University of Sydney create programmable nanostructures using DNA origami, enabling rapid prototyping of diverse configurations. These custom-designed nanostructures have potential applications in targeted drug delivery, responsive materials, and energy-efficient optical signal processing.