Articles tagged with Electronics
Scientists at Northwestern University have developed an algorithm that enables smartwatches to more accurately monitor the calories burned by people with obesity during various physical activities. The technology bridges a critical gap in fitness technology, allowing for more accurate tracking and tailored interventions.
Researchers at Texas A&M University found that websites use browser fingerprinting to track people across browser sessions and sites. Even users who opt out of tracking under privacy laws may still be silently tracked through fingerprinting.
Researchers developed a new fabrication process that integrates high-performance GaN transistors onto standard silicon CMOS chips in a low-cost and scalable way. This technology reduces the temperature of the overall system and improves signal strength, bandwidth, and battery life in mobile phones.
MIT researchers create a novel AI hardware accelerator that performs machine-learning computations at the speed of light, classifying wireless signals in nanoseconds. The photonic chip is scalable, flexible, and energy-efficient, making it suitable for future 6G wireless applications.
Researchers review how geometry engineering improves c-Si's mechanical properties, allowing for high-performance soft electronics. Silicon nanowires with enhanced flexibility, superior mechanical properties, and excellent electrical performance are poised to transform the landscape of flexible electronics.
Bioengineering researchers at Harvard John A. Paulson School of Engineering and Applied Sciences developed a soft, thin, stretchable bioelectronic device that can be implanted into a tadpole embryo's neural plate, recording electrical activity from single brain cells with millisecond precision.
Researchers developed a self-folding origami-based sensor that harnesses the triboelectric effect to generate electricity and eliminate the need for batteries. The device can identify dropped objects with high accuracy, making it suitable for logistics, medical devices, and wearable applications.
Researchers have developed glass-epoxy-based waveguides with low polarization-dependent loss and differential group delay, suitable for stable signal transmission in co-packaged optics. The waveguides demonstrated high power stability and reliability under six hours of continuous use.
Researchers at the University of Tokyo have developed a new transistor design using gallium-doped indium oxide, achieving high mobility and reliable performance. The gate-all-around structure enhances efficiency and scalability, making it suitable for big data and AI applications.
Empa researchers have developed a novel deposition process for piezoelectric thin films using HiPIMS, producing high-quality layers on insulating substrates at low temperatures. The technique overcomes the challenge of argon inclusions by timing the voltage application to accelerate desired ions.
Researchers at Tokyo University of Science developed a self-powered artificial synapse capable of distinguishing colors with remarkable precision. The device generates electricity via solar energy conversion, making it suitable for edge computing applications.
A new model details the kinetics of exciton dynamics in OLED materials, enhancing lifetime and accelerating material development. The findings have potential to improve fluorescence efficiency, leading to more advanced OLED devices.
Researchers at the University of Michigan have demonstrated an efficient blue phosphorescent OLED that can last as long as green OLEDs. The device uses a tandem OLED structure and surface plasmon resonance to improve efficiency.
A new simulation approach has been developed to model plasmas used in computer chip manufacturing, allowing for improved stability and efficiency. The new code accurately conserves energy, helping to ensure the results reflect real physical processes.
Researchers at University of Michigan have discovered a rule-breaking silicone that can conduct electricity, upending assumptions about the material class. The semiconducting properties of the silicone copolymer enable its spectrum of colors, with longer chain lengths producing red tones and shorter chains emitting blue light.
University of Missouri scientists have developed an ice lithography technique that etches small patterns onto fragile biological surfaces without damaging them. The method uses frozen ethanol to protect the surface and apply precise patterns.
Researchers at U of A create a transistor that operates at speeds over 1,000 times faster than modern computer chips. The breakthrough uses quantum effects to manipulate electrons in graphene, enabling ultrafast processing for applications in space research, chemistry, and healthcare.
Researchers have discovered how to tune electromagnetic pulse intensity by adjusting laser energy and gas jet pressure, enabling controlled EMP applications. The study identified four primary sources of EMPs and found a correlation between EMP intensity and electron acceleration.
The University of Michigan researchers discovered a simple annealing method that enhances the quality of materials used in cell phones, sensors and energy harvesting devices. The process boosts piezoelectricity eight times beyond current technology.
Researchers developed a novel CMOS chip-based phased-array receiver that maximizes satellite performance by supporting dual-polarized beams, enabling greater communication flexibility. The innovation doubles the number of controllable beams and improves system capacity, making it crucial for real-world deployments.
Researchers at the University of Surrey unveiled a new type of electronic component called multimodal transistor (MMT) that simplifies display circuits while improving performance and sustainability. The MMT enables compact high-performance circuits suitable for devices like smartphones, tablets and wearables, reducing power requiremen...
Researchers at POSTECH have developed an interlocked electrode-electrolyte system that forms covalent chemical bonds between the electrode and electrolyte, maintaining long-term stability. The IEE-based pouch cell demonstrated significantly higher energy density compared to traditional lithium-ion batteries.
Scientists have developed a new microscope that accurately measures directional heat flow in materials. This advancement can lead to better designs for electronic devices and energy systems, with potential applications in faster computers, more efficient solar panels, and batteries.
Researchers developed a technology to produce high-quality p-type transistors using vapor-deposited tin-based perovskites, achieving high mobility and low power consumption. The innovation enables large-area device arrays and reduces manufacturing costs.
Physicists at the University of Miami have discovered a unique molecule that can conduct electricity without losing energy, paving the way for smaller and more powerful computing devices. The molecule, composed of chemical elements found in nature, offers unparalleled electrical conductance and stability under everyday conditions.
Fraunhofer IAF presents a bidirectional 1200 V GaN switch with integrated free-wheeling diodes, enabling more efficient power electronics for energy generation and mobility. The switch can be used in grid-connected power converters and electric drive systems.
The MyoStep project represents a significant advancement in pediatric mobility aids for children with cerebral palsy, addressing motor impairments that restrict participation in physical activities. The soft power suit provides a lightweight, discreet solution tailored to fit seamlessly into the lives of children and their families.
A research group led by Francesco Greco transformed marker ink into a graphene-based electrical circuit using a laser beam, creating a new frontier in electronics. The innovation uses simple and low-cost materials to generate innovative applications on any surface.
The University of Tennessee and Volkswagen Group of America have partnered on strategic research projects accelerating technology discovery and commercialization. The two have collaborated on lighter composites, high-power wireless charging and material upcycling, influencing Volkswagen brands globally.
Researchers at MIT have developed a new method to fabricate stretchable ceramics, glass, and metals using a double-network design. This material can stretch over four times its size without breaking, making it suitable for tear-resistant textiles and flexible semiconductors.
MIT engineers developed ultrathin electronic films that sense heat and other signals, reducing the bulk of conventional goggles and scopes. The new pyroelectric thin film is highly sensitive to heat and radiation across the far-infrared spectrum, enabling lighter, more portable night-vision eyewear.
Researchers from The University of Tokyo developed a novel water-cooling system with three-dimensional microfluidic channel structures to enhance heat transfer. The new design achieved a significant increase in performance, reaching up to 10^5 COP, surpassing conventional cooling techniques.
Researchers at the University of Michigan have discovered a mechanism that holds new ferroelectric semiconductors together, enabling high power transistors and sensors. The team found an atomic-scale break in the material that creates a conductive pathway, allowing for adjustable superhighways for electricity.
Researchers found a radical new way to move heat, faster than ever before, using hexagonal boron nitride to direct heat like a beam of light. This breakthrough could revolutionize cooling in high-performance electronics, allowing faster and more powerful devices without overheating.
Researchers at Nagoya University developed an ultra-thin loop heat pipe to improve heat control in smartphones and tablets. The device transports heat without electricity, enabling sustained high performance without compromising on design or user experience.
Researchers created a hopping robot that can traverse challenging terrains, carry heavy payloads, and uses less energy than aerial robots. The robot's springy leg and flapping-wing modules enable it to jump over obstacles and adjust its orientation mid-air.
A new study published in PLOS Digital Health found that older drivers with GPS navigation systems tend to drive more frequently, suggesting these tools help maintain driving mobility. The research reveals that using GPS can alleviate spatial orientation difficulties and support older adults' independence on the roads.
Researchers at Columbia University School of Engineering and Applied Science have developed a new biologically inspired bottom-up way for 3D electronics to build themselves using DNA. The technique allows for the creation of complex structures with nanoscale precision, which could lead to more powerful and dense electronic devices.
Researchers from Tsinghua University proposed a novel method for calculating Critical Clearing Time (CCT) sensitivity in power systems with high penetration of power electronic devices. The new method considers the effects of current limiting and control switching in IBRs, providing a tool for stability analysis.
Researchers at MIT created a photon-shuttling interconnect that facilitates remote entanglement, a key step toward developing practical quantum computers. The device enables all-to-all communication between multiple superconducting quantum processors, paving the way for more efficient and scalable quantum computing.
A new platform allows users to rapidly prototype large, sturdy interactive structures without requiring mechanical or electrical engineering expertise. The system utilizes reconfigurable building blocks with integrated electronics that can be assembled into complex devices.
Researchers explore 3D printing-based fabrication methods to overcome challenges in patterning, stability and oxidation issues. Ink modification strategies and auxiliary printing techniques refine fabrication, enabling precise patterning and complex interconnections.
Researchers found that polymers used as flame retardants can break down into dozens of smaller molecules, causing mitochondrial dysfunction and developmental harm. The study also detected these pollutants in soil, air, and dust near electronic waste recycling facilities.
Defects in two-dimensional materials can dramatically alter rippling effects, even stopping the sheet in place. Researchers used machine learning-based computer models to observe the rippling behavior of different materials with and without defects.
Researchers created a fiber computer that can be integrated into clothing to track health conditions and physical activity. The technology achieved an average accuracy of 70% when individually operated, but increased to nearly 95% when connected collectively.
The study introduced an omnidirectional circular ring antenna that operates across a broad frequency range (150 MHz–600 MHz) while maintaining a low profile. The antenna features a compact design, achieving an impedance bandwidth of 12:1 and a lateral diameter of 0.19 times the wavelength.
University of Michigan researchers will scale up NASA's technology and manufacturing process to create durable silicon carbide circuits that can operate at record-high temperatures. The project aims to advance aerospace electronics and sensors for aircraft engines, and support renewable energy and defense applications.
Researchers from Science Tokyo developed three design techniques to enhance power efficiency and data rates in wireless transmitters, enabling synergistic operation of electronic devices. The techniques avoid the power-hungry CORDIC circuit block and ensure linearity in amplitude and phase modulation.
Researchers have developed a new form of QR code that can protect users from phishing attacks by signaling whether a link is safe or not. The SDMQR codes provide an added layer of security without interfering with existing functionality, allowing companies to replace traditional barcodes with more sophisticated QR codes.
Researchers at MIT and Harvard University have directly measured superfluid stiffness in magic-angle graphene for the first time, shedding light on its remarkable properties. The study suggests that quantum geometry governs the material's superconductivity, a key step toward understanding its exceptional properties.
Researchers at Linköping University have developed a new technology that adds xenon to digital memories, allowing for even material coating in small cavities. This breakthrough enables more information storage in the same physical size, with 4 terabytes possible in a memory card once holding only 64 megabytes.
A study by Professor Jan Peters at the University of Cologne explores how virtual slot machines' design features trigger dopaminergic effects in the brain's reward system, leading to erroneous beliefs and expectations about control over outcomes and chances of winning. This can lead to continued gambling despite high losses.
A new interposer design uses optical connections to transfer data between chips, enabling high-performance computing and addressing the 'memory wall' limit on AI growth. The technology allows for faster communication, reconfigurable pathways, and real-time network control.
Researchers from Osaka University have developed a new technology to lower power consumption for modern memory devices, enabling an electric-field-based writing scheme. The proposed technology could provide an alternative to traditional RAM and is a promising step towards implementing practical magnetoelectric (ME)-MRAM devices.
The Department of Energy's new research centers, led by SLAC National Accelerator Laboratory, aim to make microelectronics more energy efficient and operate in extreme environments. Researchers will focus on innovating material design, devices, and systems architectures to push computing and sensing capabilities.
Researchers at Princeton University have developed an AI-powered system to design complex wireless chips, reducing time and cost. The AI creates intricate electromagnetic structures that improve performance and efficiency, often in ways that human designers cannot understand.
A research team at Hokkaido University developed novel cerium oxide-based thermal switches, surpassing prior benchmarks with high efficiency and sustainability. The switches feature a new benchmark for electrochemical thermal switches, offering broad applications in industries such as electronics cooling and renewable energy systems.
PPPL researchers will lead two collaborative projects involving national labs, academic, and industry partners to advance microelectronics and sensors. The projects aim to create a science-based plasma-processing toolbox for next-generation semiconductor device manufacturing processes.
Walt Downing, Executive VP and COO of SwRI, received the prestigious IEEE MGA Leadership Award for his exemplary leadership in implementing member activities. He has held various leadership positions over decades and recognizes the importance of professional societies like IEEE in developing skills.
Researchers create multilayered chip design that doesn't require silicon wafer substrates, allowing for better communication and computation between layers. This breakthrough enables the construction of fast and powerful AI hardware comparable to supercomputers.