Articles tagged with Machinery
A University of Houston professor has found that tree-like thin films release heat at least three times better than traditional methods, enabling more efficient cooling in AI data centers. The discovery demonstrates the power of physics-aware AI design for validating high-impact cooling solutions.
Researchers at Hong Kong Polytechnic University create a new machining method that combines laser and magnetic fields to machine advanced materials like high-entropy alloys. The dual-field approach produces smoother surfaces, reduced damage, and improved material removal rates.
The article reviews and expands the active damping strategy for permanent magnet motor drive systems with LC filters, analyzing its stability, dynamic performance, robustness, and algorithm complexity. A new expansion using capacitor current feedback with high-pass filter is proposed to overcome resonance suppression problems.
A breakthrough AI system called OmniPredict can predict human pedestrian behaviors with unprecedented accuracy, revolutionizing self-driving cars and urban mobility. The model combines visual cues with contextual information to anticipate pedestrians' next moves, reducing the risk of accidents and improving traffic safety.
Researchers at UC Davis invent a Stirling engine that can harness the natural warmth of the ground and cold depths of space to generate mechanical power. The device has been shown to produce up to 400 milliwatts of power per square meter, with potential applications in ventilating greenhouses and residential buildings.
A multidisciplinary team led by Natasha Vermaak investigates developing structural materials resistant to high-frequency thermomechanical loads for rotating detonation engines. The project aims to address the lack of established materials solutions for extreme thermomechanical loadings, enabling advancements in propulsion systems.
A new laser machining method enables high-precision patterned laser micro-grooving with root mean square errors below 0.5 μm. This technique allows for rapid and scalable manufacturing of custom microstructures, advancing applications in microfluidic devices, sensors, and heat dissipation systems.
Southwest Research Institute (SwRI) is expanding its heat exchanger testing capabilities to include megawatt-scale performance evaluations. This move addresses a significant market gap for high-heat transfer rates involving high-temperature and -flowrate applications in data centers, defense, and other fields.
Researchers used foam-entrapped supercritical CO2 to prevent stored carbon from moving back to the surface. The approach shows promise for enhancing oil recovery and reducing CO2 migration.
International Journal of Extreme Manufacturing (IJEM) achieves a new Impact Factor of 21.3, surpassing 20 for the first time and maintaining its position as top journal in the field. IJEM has attracted submissions from 853 institutions in 81 countries.
Quaise Energy has successfully demonstrated its novel drilling technique on a full-scale oil rig, aiming to prove that clean, renewable geothermal energy can power the world. The company's three-tier approach involves replacing conventional drill bits with millimeter-wave energy to create deeper holes and access supercritical water.
The MASTER project invites educational institutions to develop innovative XR educational content and validate cutting-edge XR technologies in real settings. Selected applicants will receive financial support, access to advanced XR tools, and expert mentorship.
Scientists have uncovered the molecular structure of Mycoplasma mobile's twin motors that power its gliding ability, using cryo-electron microscopy. The complex structure reveals a new mechanism by which energy from ATP hydrolysis is converted into motility.
A new study by UZH economists found that higher minimum wages lead firms to develop more automation technologies to reduce production costs. The study analyzed past labor market reforms and their impact on innovation trends, showing a 2% to 5% rise in innovation in response to a 1% wage increase.
This study identified PIBP4, a PRA protein, as a crucial component of the PigmR-mediated immune signaling pathway in rice. The absence of PIBP4 and its interacting partner OsRab5a compromised blast resistance by disrupting PigmR's microdomain localization.
Researchers develop novel methods to visualize and understand gas flow dynamics in plasma arc cutting, improving cut quality and efficiency. They found that curved cutting fronts result in oblique shockwave structures, which reduce flow velocity and can lead to safer and more efficient dismantling of nuclear facilities.
Researchers found that smart TVs send detailed profiles of consumers' habits to servers, using Automatic Content Recognition technology. This tracking raises significant privacy concerns, particularly when the TV is used solely as a monitor, and can be difficult for users to disable due to lack of transparency.
Researchers have developed a virtual vibration test rig capable of accurately simulating the fatigue life of dozer push arms, streamlining the testing process and reducing costs. The new approach enables precise predictions of component durability, transforming how construction machinery is evaluated and enhanced.
A new study found that removing hedgerows and field margins decreases the diversity and abundance of arthropods, which can lead to reduced natural pest control. The research suggests that using flowering plants in field margins and implementing agri-environmental measures can be effective ways to increase farmland biodiversity.
Research at Tampere University aims to develop adaptable safety systems for autonomous off-road mobile machinery. The framework focuses on ensuring public safety without compromising technological advancements, incorporating a human-in-the-loop safety option.
Researchers highlight the role of post-transcriptional RNA modifications in AML pathogenesis, identifying m6A and m7G regulators as potential therapeutic targets. Targeted therapies, including selective inhibitors and Traditional Chinese Medicine compounds, show promise in promoting cell differentiation and reversing AML phenotypes.
Agricultural occupations have one of the highest rates of workplace injuries and fatalities in the U.S. Two studies from the University of Illinois found that vehicles and machinery are the leading causes of injuries, with men being twice as likely to be victims. Understanding the nature and source of injuries is crucial for developing...
Researchers from Pohang University of Science & Technology employ linker ions to pioneer three-dimensional microprinting technology applicable to inorganic substances and other various materials. The team successfully crafts inorganic porous structures with dimensions below 10 μm without specialized equipment.
Researchers at UC Santa Barbara developed an adaptive roof tile that can switch between heating and cooling modes based on temperature. The device, powered by a wax motor, has been shown to reduce energy consumption for cooling by 3.1x and heating by 2.6x compared to conventional devices.
A new laser-based sampling system allows for higher depth resolution, enabling scientists to reconstruct continuous annual temperature changes thousands of years ago. The LMS system overcomes previous limitations in sampling ice cores, preserving critical oxygen and hydrogen isotopes needed to infer past temperatures.
A team of researchers has successfully created a high-performance graphene-dielectric interface using a novel technique called UV-assisted atomic layer deposition. This breakthrough results in uniform atomic layer deposition without compromising graphene's properties, leading to improved electrical performance and reduced defects.
A novel, low-cost sensor system utilizing force-sensing resistor technology has been developed by Pusan National University researchers for real-time pipeline monitoring. The system demonstrated a 99.4% correlation with commercial sensors, enabling accurate detection of pipeline damages.
A team of researchers at Tohoku University has developed an artificial intelligence-driven contact control system to minimize friction between moving parts in machinery, aiming to reduce wear and tear and extend lifespan.
A new digital twin of laser-directed energy deposition repair technology has been developed to improve industrial sustainability. The system automatically determines optimum forming conditions, reducing metal powder waste and increasing the effectiveness of the repair process.
Scientists from Harvard John A. Paulson School of Engineering and Applied Sciences have created a machine that uses surface tension of water to grab and manipulate microscopic objects, enabling nanoscopic manufacturing. The device can braid micrometer-scale fibers of synthetic material Kevlar, opening doors for high-frequency conductors.
A recent study published in Engineering Construction & Architectural Management identified the main obstacles preventing digital transformation in the engineering and construction industry. The three main problems are a lack of laws and regulations, a lack of support and leadership, and a lack of resources and professionals.
Researchers at the University of Pittsburgh unveiled the first visualization of friction at the atomic level, showing that it occurs regardless of surface smoothness. This discovery could lead to better lubricants and materials to minimize friction and wear in machinery.
Researchers use machine learning to automatically analyze Reflection High-Energy Electron Diffraction (RHEED) data, enabling faster and more efficient discovery of new materials. The study focused on surface superstructures in thin-film silicon surfaces and identified optimal synthesis conditions using non-negative matrix factorization.
Researchers developed a color filter with metasurfaces that can display vivid images on a filter as thin as three strands of hair. The filter offers 120-170 times higher resolution than high-end smartphone screens and can control individual pixel colors for various applications.
Concentrated solar power (CSP) plants use wet cooling methods to dissipate waste heat, but this can lead to significant water loss. A new study developed a radiative cooling system with cold storage that reduces water consumption by up to 85% in hot regions.
Researchers are refining COBRA, a repair robot inspired by snakes, for medical use in throat cancer and injury surgery. The robot offers more dexterity, accuracy, and high-definition views for surgical teams.
A research team at Pohang University of Science & Technology developed an optical encryption platform that works in both the visible and ultraviolet regimes. The platform uses metasurface technology to display unique product numbers and improve encryption security.
A Korean research team has developed a metasurface-based optical device that can store over 100 times more information than conventional rainbow hologram stickers. The device selectively displays images according to angle, color, and polarization, making it highly secure against counterfeiting.
Researchers identified three MOFs providing the most energy efficient capture of SF6 under vacuum swing adsorption, while two others showed best performance under pressure swing adsorption. The study suggests that materials optimal for one process may not be optimal for the other.
The AI optimization improves the motor's power factor, reducing disruptions to the power grid. The optimized motor shows excellent performance, with improved efficiency and increased torque while drawing less current.
Quaise Inc.'s new geothermal drilling technology uses millimeter waves to melt and vaporize rock, allowing for deeper access to hot resources. The company's test campaign aims to drill holes with increasing aspect ratios, simulating the full drilling process.
SUTD researchers develop sensor that assigns dirt score to areas based on visual and tactile analysis, allowing for more efficient exploration of complex spaces. The sensor is integrated with a smart algorithm that directs the robot to focus on areas with high dirt probability.
A POSTECH research team developed a water-driven self-operating soft actuator that exceeds the strength and speed of conventional soft actuators. The actuator is inspired by the mutable collagenous tissue of sea cucumbers, which can change shape in response to water uptake.
A team of Beckman researchers developed software to boost infrared imaging-based cancer diagnosis, enhancing image resolution and accelerating recording speeds. The software integrates data analysis and reduces limitations associated with IR imaging, making it faster and more accurate.
Researchers found significant periodic flow velocity fluctuations in fuel injector ignite combustion oscillations, leading to high mechanical stress on the combustion chamber. The findings provide a reasonable answer for why these oscillations occur and have significant implications for preventing fatal damage in critical engines.
Researchers at Penn State College of Medicine have identified ubiquitin as crucial to budding, a process allowing viruses to exit host cells and infect new ones. The study's findings suggest that ubiquitin plays a key role in the maturation and release of viral particles from the cell surface.
Researchers at the Weizmann Institute of Science have developed a new material that outperforms existing lubricants in industrial conditions. The material, made of tungsten disulfide fullerene-like molecules, reduces friction between moving metal parts by less than half and wear by up to six times.