Scientists have identified the genetics of caddisflies' evolutionary superpower, which involves a gene that produces a main protein in silk. The study found remarkable heterogeneity in those genes among individuals from two nearby wild populations, highlighting how nature modifies this bioadhesive material while preserving its performa...
SourceUniversity of Utah·JournalMolecular Biology and Evolution·TypeData/statistical analysis·DateJul 8, 2026
Researchers developed an aerated hydrogel that allows air to pass through while maintaining its water content. This breakthrough enables longer-lasting products, such as breathable bandages, implants, and wearable sensors, with improved skin comfort and reduced sweat buildup.
SourceMassachusetts Institute of Technology·JournalNature·DateJul 8, 2026
Sky-Watcher EQ6-R Pro Equatorial Mount
Sky-Watcher EQ6-R Pro Equatorial Mount provides precise tracking capacity for deep-sky imaging rigs during long astrophotography sessions.
A novel supramolecular film with switchable structural and adhesive functions has been developed, exceeding industry standards for wood adhesion. The film's unique structure retains strength in wet conditions and demonstrates high-performance bonding to wood substrates.
SourceJournal of Bioresources and Bioproducts·JournalJournal of Bioresources and Bioproducts·TypeExperimental study·DateJun 24, 2026
The study reports a green ion-exchange, self-catalytic strategy for turning pulp-waste lignin into high-performance wood adhesives. The optimized LA/CA adhesive showed strong dry and wet performance, meeting Type I plywood requirements and reducing costs by up to 69.6% compared to petrochemical-based adhesives.
SourceResearch·JournalResearch·TypeNews article·DateMay 28, 2026
Researchers at Newcastle University have created an electrically conductive, water-based reversible adhesive that can join electronic components and allow for their reuse or recycling. This technology has the potential to address the massive problem of e-waste globally.
SourceNewcastle University·JournalAdvanced Electronic Materials·TypeExperimental study·DateMay 15, 2026
Researchers identified a protein from the quagga mussel that can stick to surfaces underwater without DOPA, a modified amino acid previously thought essential for adhesion. The findings could inform the design of future medical glues and anti-fouling technologies.
SourceUniversity of Toronto Faculty of Applied Science & Engineering·JournalProceedings of the National Academy of Sciences·DateMay 5, 2026
Ordinary adhesive tape stores a sequence of multiple memories with tunable strength, allowing for simple mechanical calculations. Researchers developed an automated device to create these memories by peeling the tape past designated distances.
SourcePenn State·JournalNew Journal of Physics·TypeExperimental study·DateMay 5, 2026
SAMSUNG T9 Portable SSD 2TB
SAMSUNG T9 Portable SSD 2TB transfers large imagery and model outputs quickly between field laptops, lab workstations, and secure archives.
Engineers developed an adhesive gel that can deliver substances into plants' tissues, clearing bacterial infections within 48 hours. The gel sticks to various surfaces, including hairy leaves and stems, and can be removed without damage.
SourceUniversity of California - San Diego·JournalScience Advances·DateApr 28, 2026
Researchers have developed a water-soluble cellulose ethyl phosphite (CEP) adhesive that integrates high bonding strength, environmental tolerance, and recyclability. The CEP adhesive demonstrates remarkable thermal stability and resistance to moisture-related degradation, making it suitable for various applications.
SourceJournal of Bioresources and Bioproducts·JournalJournal of Bioresources and Bioproducts·TypeExperimental study·DateApr 13, 2026
Scientists developed a scalable ultrastrong bamboo strip through homogeneous fusion, achieving 942 MPa tensile strength and 32.1 GPa Young's modulus. The material demonstrates exceptional durability, biodegradability, and practical scalability for various industries.
SourceJournal of Bioresources and Bioproducts·JournalJournal of Bioresources and Bioproducts·TypeExperimental study·DateMar 31, 2026
Researchers develop programmable system to selectively pick up and place delicate electronic components, enabling mass production of defect-free displays and 3D microchips. The 'smart stamp' technology uses localized heating to control a polymer's stickiness, allowing precise transfer of semiconductor chips and other materials.
SourceInternational Journal of Extreme Manufacturing·JournalInternational Journal of Extreme Manufacturing·DateMar 24, 2026
Kyushu University researchers observed individual polymer chains' behavior on solid surfaces, revealing non-equilibrium dynamics and thermal fluctuations. The study contributes to enhancing adhesive performance and lightweighting of materials.
SourceKyushu University·JournalJournal of the American Chemical Society·TypeObservational study·DateMar 11, 2026
Apple iPhone 17 Pro
Apple iPhone 17 Pro delivers top performance and advanced cameras for field documentation, data collection, and secure research communications.
Developing a lifesaving device that can stop fatal blood loss in seconds, researchers at Texas A&M University have made significant breakthroughs. By using clay minerals and nano-silicate particles, the team has created injectable hemostatic bandages that reduce bleeding time by nearly 70%.
SourceTexas A&M University·JournalAdvanced Science·DateFeb 18, 2026
Researchers at King's College London and San Diego State University identified the molecular interactions that give spider silk its exceptional strength and flexibility. The findings provide general design principles for developing high-performance, sustainable fibers.
SourceKing's College London·JournalProceedings of the National Academy of Sciences·DateFeb 5, 2026
Jeonbuk National University researchers have developed a novel, eco-friendly, and photo-switchable smart adhesive using biomass-derived materials. The adhesive demonstrates reversible light-controlled adhesion and retains over 90% of its original strength after repeated usage cycles.
SourceJeonbuk National University, Sustainable Strategy team, Planning and Coordination Division·JournalChemical Engineering Journal·TypeExperimental study·DateDec 10, 2025
Davis Instruments Vantage Pro2 Weather Station
Davis Instruments Vantage Pro2 Weather Station offers research-grade local weather data for networked stations, campuses, and community observatories.
Researchers developed a composite bioabsorbable hemostatic sponge inspired by mussels and extracellular matrix. The sponge quickly absorbs blood and firmly adheres to tissues, enhancing hemostatic performance. It promotes wound stabilization, accelerates blood clotting, and reduces inflammation and tissue damage.
SourcePohang University of Science & Technology (POSTECH)·JournalAdvanced Healthcare Materials·DateOct 14, 2025
Scientists at The University of Osaka developed a polymeric adhesive that can be reused repeatedly by introducing reversible bonds into the interface. This technology could improve manufacturing yield, reduce costs and minimize waste.
SourceThe University of Osaka·JournalAdvanced Materials·TypeExperimental study·DateOct 5, 2025
Researchers from Seoul National University of Science & Technology developed a smart adhesive system based on starfish for temporary and switchable underwater adhesion. The system exhibits high adhesion hysteresis, automatic release based on outside stimuli, and quick detachment by pneumatic actuation.
SourceSeoul National University of Science & Technology·JournalScience Advances·TypeExperimental study·DateAug 27, 2025
Researchers at Texas A&M University have developed a new type of adhesive that could improve the comfort and safety of wearable medical devices. The adhesive, made from polyelectrolyte-complex coatings, is water-based and has been shown to match the strength of commercial-grade adhesives while reducing skin irritation.
SourceTexas A&M University·JournalMacromolecular Rapid Communications·DateJul 15, 2025
Fluke 87V Industrial Digital Multimeter
Fluke 87V Industrial Digital Multimeter is a trusted meter for precise measurements during instrument integration, repairs, and field diagnostics.
Researchers developed a self-adaptive core-shell dry adhesive with remarkable performance under non-parallel contact. The 'live core' adapts to macroscopic interfacial angle errors, enabling stress equalization and high adhesion strength.
SourceHigher Education Press·JournalEngineering·DateApr 23, 2025
A team of researchers from Syracuse University and the University of Louisiana at Lafayette has discovered a new surface texture on sculpin fins that may enhance their grip in harsh environments. This finding could lead to the development of bio-inspired adhesives for robots, medical devices, and other applications.
SourceSyracuse University·JournalRoyal Society Open Science·DateApr 23, 2025
Jiawei Yang creates bioadhesives with two layers, a transparent solid hydrogel layer and a clear liquid adhesive layer, to provide fast, strong, stable, and deep adhesion in the body. The new bioadhesives have potential applications in treating Parkinson's disease, heart failure, and healing damaged cartilage.
Researchers have developed a more efficient method to monitor the olive fly population, enabling growers to make informed decisions on pest control. The new system uses small double-sided yellow adhesive panels, distributed at 4-15 traps per hectare, to accurately estimate olive fly numbers and damage.
SourceUniversity of Córdoba·JournalJournal of Economic Entomology·TypeExperimental study·DateMar 25, 2025
Apple iPad Pro 11-inch (M4)
Apple iPad Pro 11-inch (M4) runs demanding GIS, imaging, and annotation workflows on the go for surveys, briefings, and lab notebooks.
A new polymer adhesive has been developed that can be removed from plastic surfaces with basic or alkaline solutions, improving the quality of recycled plastic. This breakthrough could transform how waste is handled across industries by making it easier to separate different materials during recycling.
SourceUniversity of Reading·JournalMacromolecules·TypeObservational study·DateFeb 18, 2025
A recent study by UCLA researchers has discovered high amounts of bis(2,2,6,6-tetramethyl-4-piperidyl) sebacate (BTMPS) in illicitly sold fentanyl. BTMPS is not approved for human consumption and has been linked to serious health effects such as cardiotoxicity and ocular damage.
SourceUniversity of California - Los Angeles Health Sciences·JournalJAMA·TypeObservational study·DateFeb 7, 2025
Researchers developed a novel biocompatible nanoadhesive for corneal transplantation, showcasing improved cell compatibility and antibacterial performance. The nanoadhesive demonstrates strong adhesive strength and prevents wound infection without causing necrosis.
SourceSongshan Lake Materials Laboratory·JournalMaterials Futures·DateFeb 7, 2025
Apple Watch Series 11 (GPS, 46mm)
Apple Watch Series 11 (GPS, 46mm) tracks health metrics and safety alerts during long observing sessions, fieldwork, and remote expeditions.
Researchers have developed a new, low-cost triboelectric nanogenerator (TENG) that harnesses the power of tacky tape to generate electricity. The device produces up to 53 milliwatts of power and can light over 350 LED lights or power a laser pointer.
SourceAmerican Chemical Society·JournalACS Omega·DateJan 30, 2025
Researchers developed mucoadhesive films combining xyloglucan and green tea extract to treat oral mucositis, a painful inflammation caused by cancer treatment. The films demonstrated high strength and adhesion forces comparable to commercial products, showing promise as a novel treatment for oral mucositis.
SourceTokyo University of Science·JournalACS Omega·TypeExperimental study·DateJan 22, 2025
A POSTECH research team found that EGF/EGF-like domains interact with GlcNAc-based biopolymers to achieve strong underwater adhesion without oxidation, leading to durable and reversible bonds.
SourcePohang University of Science & Technology (POSTECH)·JournalNature Communications·DateJan 22, 2025
Researchers at Colorado State University have developed a stronger, biodegradable adhesive polymer that can replace common superglues. The new polymer, made from P3HB, offers tunable adhesion strength and is biodegradable under various conditions.
SourceColorado State University·JournalScience·DateJan 16, 2025
Researchers developed a novel inhalable therapeutic delivery system for lung cancer using mucoadhesive protein nanoparticles inspired by marine mussels. The approach leverages the adhesive properties of mussel proteins to enable selective payload release and minimize adverse effects.
SourcePohang University of Science & Technology (POSTECH)·JournalBiomaterials·DateJan 8, 2025
DJI Air 3 (RC-N2)
DJI Air 3 (RC-N2) captures 4K mapping passes and environmental surveys with dual cameras, long flight time, and omnidirectional obstacle sensing.
Researchers at POSTECH developed an innovative injectable adhesive hydrogel that regenerates bone using harmless visible light. The hydrogel addresses limitations of existing treatments by simultaneously achieving cross-linking and mineralization without separate bone grafts or adhesives.
SourcePohang University of Science & Technology (POSTECH)·JournalBiomaterials·DateDec 30, 2024
A team of researchers from over 5 countries found a Neanderthal structure in Vanguard Cave, Gibraltar, that matches theoretical studies on anoxic heating. The discovery suggests Neanderthals had advanced cognitive abilities, including organization and practice to extract resin.
SourceUniversity of Seville·JournalQuaternary Science Reviews·DateNov 26, 2024
Liquid-based electronic materials offer inherent flexibility and conformability, mitigating mechanical mismatches between human tissues and electronic devices. These materials have been demonstrated in various applications such as strain sensors, touch sensors, implantable stimulators, encapsulation solutions, and adhesives.
SourceIndustrial Chemistry & Materials·JournalIndustrial Chemistry and Materials·TypeLiterature review·DateOct 10, 2024
Researchers have developed an octopus-inspired adhesive that can quickly grab and controllably release challenging underwater objects. The adhesive achieves high attachment strength on various surfaces, including rough and curved ones, within a fraction of a second.
SourceVirginia Tech·JournalAdvanced Science·DateOct 9, 2024
Researchers developed an octopus-inspired adhesive with elastic, curved stalk and membrane that adheres to multiple surfaces in wet environments. The adhesive demonstrated strong attachment to complex objects and could be rapidly attached and released.
Kestrel 3000 Pocket Weather Meter
Kestrel 3000 Pocket Weather Meter measures wind, temperature, and humidity in real time for site assessments, aviation checks, and safety briefings.
Researchers at Tufts University develop a web-slinging technology that shoots fibers from a needle, solidifies into a string, and adheres to objects. The innovation uses silk fibroin solution with added dopamine and chitosan to increase tensile strength and adhesiveness.
SourceTufts University·JournalAdvanced Functional Materials·TypeExperimental study·DateOct 9, 2024
Researchers have developed functional interlocking metasurfaces that offer more structural strength and stability than traditional techniques like bolts and adhesives. These metasurfaces can selectively disengage and re-engage on demand while maintaining consistent joint strength.
SourceTexas A&M University·JournalMaterials & Design·DateOct 9, 2024
The ADA Forsyth Institute has received a $6.2 million grant from the NIH to design an AI-driven amalgam replacement for dental restoratives. The new material will feature self-healing and antimicrobial properties, responding to biological signals in each individual patient's mouth.
AmScope B120C-5M Compound Microscope
AmScope B120C-5M Compound Microscope supports teaching labs and QA checks with LED illumination, mechanical stage, and included 5MP camera.
Researchers at Nagoya University developed a new adhesive combining epoxy resin and hydrogen-bonded styrenic thermoplastic elastomers. The breakthrough offers unparalleled impact strength, enabling lighter vehicle production with improved fuel efficiency and reduced emissions.
SourceNagoya University·JournalACS Applied Materials & Interfaces·DateSep 23, 2024
A new type of mussel-inspired adhesive has been developed that can be deactivated 'on command' through oxidation, allowing for efficient repair and recycling. The biobased adhesive loses its stickiness without becoming dramatically hydrophobic, making it easier to remove.
SourceWiley·JournalAngewandte Chemie International Edition·TypeExperimental study·DateSep 19, 2024
Glassy gels are a new class of materials that combine the properties of glassy polymers and gels, with unique characteristics including high elasticity and adhesive surfaces. The materials were created by mixing liquid precursors with an ionic liquid, resulting in a hard yet stretchable material.
SourceNorth Carolina State University·JournalNature·TypeExperimental study·DateJun 19, 2024
Researchers developed an adhesive sensing device that seamlessly attaches to human skin to detect and monitor various health signals, such as glucose levels and heart rate. The device can be reprogrammed and recycled, making it a potential tool for managing diseases like diabetes.
SourcePenn State·JournalAdvanced Materials·TypeExperimental study·DateMay 30, 2024
Researchers developed adhesive hydrogel coatings that eliminate fibrosis, a common issue with medical implants. The coatings bind devices to tissue and prevent the immune system from attacking them.
SourceMassachusetts Institute of Technology·JournalNature·DateMay 22, 2024
Anker Laptop Power Bank 25,000mAh (Triple 100W USB-C)
Anker Laptop Power Bank 25,000mAh (Triple 100W USB-C) keeps Macs, tablets, and meters powered during extended observing runs and remote surveys.
Researchers analyzed wheat-based glues used in historic bookbinding to understand their adhesiveness and degradation. They found that starch glue is more durable and flexible than flour glue, making it a potentially better choice for book repairs.
SourceAmerican Chemical Society·JournalJournal of Proteome Research·DateApr 25, 2024
Researchers at Brigham and Women's Hospital developed a sprayable adhesive hydrogel product to address GI wound management limitations. The material promotes rapid wound healing, provides tissue protection, and minimizes complications under harsh conditions.
SourceBrigham and Women's Hospital·JournalAdvanced Materials·TypeExperimental study·DateMar 19, 2024
Neanderthals used a complex adhesive made from ochre and bitumen to construct their stone tools, revealing higher levels of cognition and cultural development than previously thought. This discovery provides early evidence of adhesive use in Europe and sheds light on the cognitive abilities of Neanderthals.
SourceNew York University·JournalScience Advances·DateFeb 21, 2024
Meta Quest 3 512GB
Meta Quest 3 512GB enables immersive mission planning, terrain rehearsal, and interactive STEM demos with high-resolution mixed-reality experiences.
Researchers developed customized adhesive patches using mussel-derived proteins, exhibiting strong underwater adhesion, biocompatibility, and adjustable degradation time. These patches showed successful treatment in animal models, paving the way for personalized medical applications.
SourcePohang University of Science & Technology (POSTECH)·JournalAdvanced Materials·DateFeb 12, 2024
Researchers developed a UV-sensitive tape that can transfer 2D materials like graphene with ease, reducing damage and increasing efficiency. The new technology allows for flexible plastics to be used in device substrates, expanding potential applications.
SourceKyushu University·JournalNature Electronics·TypeExperimental study·DateFeb 9, 2024
A KAIST research team has developed a stretchable and adhesive microneedle sensor that can detect physiological signals without being affected by sweat and dead skin. The sensor allows for long-term stable control of wearable robots, enabling precise movement recognition for rehabilitation treatments.
SourceThe Korea Advanced Institute of Science and Technology (KAIST)·JournalScience Advances·TypeMeta-analysis·DateJan 30, 2024
Researchers at KAIST have developed a micro-vacuum assisted selective transfer printing (µVAST) technology to improve the transfer of microLED chips. The technology uses laser-induced etching to create micro-hole arrays on glass substrates, allowing for precise alignment and higher adhesion switchability.
SourceThe Korea Advanced Institute of Science and Technology (KAIST)·JournalNature Communications·TypeMeta-analysis·DateDec 21, 2023
Researchers developed an adhesive gel to seal and heal challenging gastrointestinal tract-to-skin connections, showing promising results in studies. The gel's unique composition ensures it can effectively seal fistulas, preventing further complications and aiding in healing.
SourceTerasaki Institute for Biomedical Innovation·JournalActa Biomaterialia·TypeExperimental study·DateNov 30, 2023
Rigol DP832 Triple-Output Bench Power Supply
Rigol DP832 Triple-Output Bench Power Supply powers sensors, microcontrollers, and test circuits with programmable rails and stable outputs.
Researchers developed a water-based emulsion adhesive that can be separated by acidic or alkaline water, making it ideal for recycling. The glue's reversible nature enables efficient detachment of labels from bottles, reducing waste sent to landfill.
SourceNewcastle University·JournalAngewandte Chemie International Edition·TypeExperimental study·DateNov 13, 2023
A team of scientists at Newcastle University has created a novel, water-based adhesive system that can bond surfaces in the neutral pH range but can be detached again in strongly acidic or alkaline environments. The new adhesive exhibits high adhesion strength to difficult-to-bond polypropylene surfaces.
SourceWiley·JournalAngewandte Chemie International Edition·TypeExperimental study·DateNov 13, 2023
Researchers from Incheon National University create gelatin patches that generate molecular oxygen to accelerate wound healing. The new hydrogels demonstrate improved coagulation, blood closure, and neovascularization in both in vitro and in vivo experiments.
SourceIncheon National University·JournalComposites Part B Engineering·TypeExperimental study·DateNov 6, 2023
Researchers develop natural-based, low-carbon building materials by mimicking the composite adhesive secreted by sandcastle worms, which binds grains together. These materials exhibit good mechanical performance and can be constructed from various grains using oppositely charged bio-polymer adhesives.
SourceChinese Academy of Sciences Headquarters·JournalMatter·TypeExperimental study·DateSep 27, 2023
Researchers have developed a new flexible adhesive with improved recovery capabilities and high adhesive strength, enabling applications in foldable displays and medical devices. The adhesive demonstrated remarkable stability under repeated deformation and strain, making it suitable for fields requiring flexibility and optical clarity.
SourceUlsan National Institute of Science and Technology(UNIST)·JournalAdvanced Functional Materials·DateSep 19, 2023
GQ GMC-500Plus Geiger Counter
GQ GMC-500Plus Geiger Counter logs beta, gamma, and X-ray levels for environmental monitoring, training labs, and safety demonstrations.
A team of chemists at Purdue University has created a sustainable adhesive system that uses epoxidized soy oil, malic acid, and tannic acid. The new adhesive is inexpensive, effective, scalable, practical to produce and completely sustainable.
A team of Purdue researchers developed patent-pending adhesive formulations from sustainable bio-based components that grow stronger when exposed to water. The adhesives have potential applications in coral reef restoration, construction, biomedical, dental, food, and cosmetic industries.
SourcePurdue University·JournalACS Applied Materials & Interfaces·DateSep 7, 2023
Researchers at NIMS have created a novel adhesive that can be repeatedly bonded and unbonded under controlled conditions. This 'reset-on-demand' technology allows for the recovery and reuse of both the adhesive and substrate, addressing environmental concerns while maintaining strong adhesion.
SourceNational Institute for Materials Science, Japan·JournalAdvanced Functional Materials·DateJul 26, 2023